Mounting a new BFGoodrich Radial T/A 255/60-R15 using only hand tools and compressed air.
Пікірлер: 136
@vso7373 жыл бұрын
Best video on the topic yet. I see you lined up the red dot with the valve. You made it look easy...........I suppose the wheel you are working with makes it easier than most and I think the fact that you lubricated all the right spots also makes a big difference. JOB WELL DONE!
@mrwiback3 жыл бұрын
Well, thank you! Yes the tire dimension helps. Also studying other videos and planning the work makes the job easier. Cheers for commenting!
@j4ckfosttv6134 жыл бұрын
Promise y’all it’s not that easy
@supercharged2414 Жыл бұрын
Every other video totally scars up the wheel lip. Worse than curb rash and they act like that is fine.
@mnicmoreno54765 жыл бұрын
you would of made it easier if you would of started the mounting process from the backside of the rim...also after you completely air up its recommended to deflate completely and re-air ....sounds wierd but as your tire shows you where to line up valve stem with dot marked on side wall...its prebalanced..the inflation and deflation the rei-nflation relaxes the rubber and actually ensures the tire isnt "out of round" which most tire manufactures recommend
@joem46644 жыл бұрын
Is this the red or yellow dot ?
@robertcommodore19384 жыл бұрын
if You start from the front first . and then Finish it from the back side YOU May Bend Your Rim When Mounting It . Because there is nothing Supporting It. The Front Of The Rim Has Rib's To support It So It Won't Bend. the back Can Bend Much Easier. i hope This Help's someone out there. Peace
@MichaelWood-x1g Жыл бұрын
"Pre-balanced".....that's funny. Who told you that??
@eddie-g214310 ай бұрын
Very satisfying.......you took care of the rim....many congratulations to you... you're awesome!!!😉👍👏👏👏🙏🙏🙏🙏🙏
@joebickers8932 жыл бұрын
Damn , dude you made that look so easy.
@mrwiback2 жыл бұрын
Thanks! It's a very easy tire dimension to to by hand. Cheers for commenting!
@georgelee68573 жыл бұрын
That’s professional wheel handling by hand
@mrwiback3 жыл бұрын
Thank you for saying that! 🙂
@tonyrobbins16652 жыл бұрын
I cannot believe how easy you made that look ? What is that lube compound you used?
@mrwiback2 жыл бұрын
This tire is easy to mount thanks to the to the high tire wall, which is very flexible (and of course a little bit of practice). It is much harder with low profile tires. The lube is a generic brand tire lube. Many parts stores sell it. Thanks for commenting Tony! Cheers!
@bobadingo Жыл бұрын
Well normally with a new tire you wind up with a 3 or 4 inch gap between the bead of the tire and the rim flange which makes it way more difficult and requires a bead blaster to-seat the beads.. .
@gregt7223 жыл бұрын
By far the best tire mounting video! You are the only one who protects your rims! This is way to easy... why didn’t I think of that!
@mrwiback3 жыл бұрын
Thank you so much! That is why I like to do things myself. I get to do it my way. Cheers for commenting!
@gregt7223 жыл бұрын
@@mrwiback update for you... I did this and mounted my tires myself. It was too easy!
@mrwiback3 жыл бұрын
@@gregt722 Well done! What size tire? What car? Cheers!
@gregt7223 жыл бұрын
@@mrwiback I did a set of 15” on my old 1988 F150, 17” on my minivan &18” on my Murano. It’s so satisfying and I saved $300!
@norbiesison9257 Жыл бұрын
Where did you buy those rim edge protectors?
@singtracks4 жыл бұрын
brill ,,you made that look easy,,,
@mrwiback4 жыл бұрын
Well it's really not that difficult, especially with a balloony tire like that. Cheers for commenting!
@sonny24353 жыл бұрын
Thanks. What is the compound in the white tub if I may ask ::
@mrwiback3 жыл бұрын
It's a generic brand tire lube. You can find it everywhere. Cheers!
@Tiagotaf2 жыл бұрын
well done sir, flawless job! and that rim looks spectacular! may I ask which car have you installed it on ?
@mrwiback2 жыл бұрын
Thank you so much! The rims är original factory alloys and I have them on my 1975 Corvette C3. instagram.com/p/Bnok67OhjG3
@burningkarma3 жыл бұрын
Thanks man. I got a wheel and a used tire in good condition to keep as a full size spare to get rid of my useless donut spare. Hopefully it will go as smooth as this.
@mrwiback3 жыл бұрын
A spare is always good to practice on. Low risk so to stay. Difficulty depends a bit on the tire profile. High profile - easy, low profile - trickier. Good luck and cheers for commenting!
@200hit Жыл бұрын
When there's a will. There's a way!! Good job sir
@CarpSlaye4 жыл бұрын
where do you get those mounting pads I have a manual tire machine. but this looks much easier.
@mrwiback4 жыл бұрын
Thanks for commenting! If you search for 'plastic rim protectors' you will find them in many online stores. Cheers!
@LogZzKiev5 жыл бұрын
great, rim is 7 or 8 inch?
@mrwiback5 жыл бұрын
The rims are the optional factory alloys, which are 15x8". Cheers for commenting!
@cristianparra9621Ай бұрын
How many psi?
@mrwibackАй бұрын
@@cristianparra9621 About 32-34 psi after the tire has popped if I remember correctly. It takes a lot more to pop the tire and then i deflate the air and fill again to about 32-34 psi. Cheers for commenting!
@megasyxx Жыл бұрын
Slick and precise!!!! This is the best one I've seen so far and I already saw a ton of 'em!
@mrwiback Жыл бұрын
Thanks man! Cheers for commenting!
@eegg69542 жыл бұрын
Just replaced a strap-on pressure monitor on my 20" Ford rim with a low profile tire. Crackhead at the tire place broke the band and taped it with electrical tape. Great video. Fifteen minutes work. Thank you for the tip about crushing the tire into the drop rim...
@mrwiback2 жыл бұрын
Thanks buddy!
@kelvinsparks4651 Жыл бұрын
I think this is the best on KZbin , Considering the the tools you had to work with you done an excellent job, I've been 23 years in the tyre trade and i must admit i hate changing car tyres by hand.
@mrwiback Жыл бұрын
Cheers, appreciate your comment! 🙂
@buder51163 жыл бұрын
fancy rim protector >_> good day to you
@gorankovacevic45132 жыл бұрын
Thanks for video. Please,tell me,is there any glue added,or what is that thing added on tyre?
@mrwiback2 жыл бұрын
That is tyre lubrication to make the install easier. Some use just soapy water. I bought a generic brand tyre lube. One can use glue, but that is only needed when the rim is pitted or corroded and you smear that only on the mating surface on the rim. Cheers for commenting!
@michaelreece4583 жыл бұрын
What's the purpose of wearing surgical gloves?
@mrwiback3 жыл бұрын
To protect my hands without losing fingertip precision (Swedish expression). They tear easily though so you need a big box. Cheers for commenting!
@dougiequick14 жыл бұрын
DAMN! SO much easier than motorcycle tires! I thought it would be way harder than smaller MC tires....thanks!
@mrwiback4 жыл бұрын
Yes! Especially the front tire of My motorcycle is a PITA. These balloony tires are a breeze to mount. Cheers for commenting!
@cuttheloop3 жыл бұрын
I'm speechless
@7REDDRACO76 жыл бұрын
awesome work very nice cant wait to see them on car
@mrwiback6 жыл бұрын
Thanks for commenting! They look awesome. Please check my Instagram. instagram.com/p/Bl8TVC2B_pO/
@zenghailu62744 жыл бұрын
Fredrilk, thanks, very nice video.
@mrwiback4 жыл бұрын
Thanks for commenting! Also check my other videos. Cheers!
@arthurdolle52572 жыл бұрын
what are you using for lube?
@mrwiback2 жыл бұрын
It's a generic brand tire lube/mounting paste.
@eddierodden4 жыл бұрын
Good video, are those rim guards home made or can you buy them?
@mrwiback4 жыл бұрын
Thanks! Search for plastic rim protectors and you will find them.
@eddierodden4 жыл бұрын
@@mrwiback Thanks I got some and they helped me. Now I'm struggling with getting the tyre to bead.
@mrwiback4 жыл бұрын
@@eddierodden How much pressure are you using to inflate the tyre?
@eddierodden4 жыл бұрын
@@mrwiback Foot pump pressure and it comes straight back out.
@mrwiback4 жыл бұрын
@@eddierodden Oh, you need quite a bit of pressure to seat the bead. Compressed air is the way to go. Any shop or gas station should be able to help you. About twice the recommended pressure should do it. It can be a bit scary but the tyre can take it. Just inflate till it pops (both sides). Good luck!
@eli27072 жыл бұрын
Great vid
@mrwiback2 жыл бұрын
Cheers!
@williambailey99172 жыл бұрын
nice job bud
@mrwiback2 жыл бұрын
Thank you! 🙂
@brandonhosein87255 жыл бұрын
Where can I get bf Goodrich tyre's to buy
@mrwiback5 жыл бұрын
They're sold online in a lot of stores like JEGS and Summit Racing. You can also check eBay. Cheers!
@rudyaldape93143 жыл бұрын
What size tire is that
@mrwiback3 жыл бұрын
Hi, tires are 255/60 R15.
@aztropanda70824 жыл бұрын
this is my first time and my god, mine won't budge on my last step.
@eegg69542 жыл бұрын
You have to scrunch the tire into the drop rim as you pick the opposite end over the rim. Pay close attention to what his feet are doing, or you'll NEVER get it.
@zenghailu62744 жыл бұрын
Fredeilk, what type air compressor you use in your garage? Can you recommend one for pumping new fitted tyre like yours? Following your video, I changed my car tyre but my small inflator could not pump it up due to low power. Thanks a lot.
@mrwiback4 жыл бұрын
I am using a 2200 W 2-cylinder compressor with a 50 liter tank. Much like this one: www.jula.se/catalog/verktyg-och-maskiner/tryckluft/kompressorer/kompressorer/kompressor-003364/ Cheers for commenting!
@zenghailu62744 жыл бұрын
@@mrwiback Thanks a lot for letting me know.
@cuttheloop3 жыл бұрын
remove the valve from the stem
@powjieDunhiLL74 жыл бұрын
ASMR to my ear
@koenigturbo59074 жыл бұрын
Does You Tube charge money if you speak on a video??
@mrwiback4 жыл бұрын
No, I'm just shy. :)
@koenigturbo59074 жыл бұрын
@@mrwiback "Haa Haaa"!! funny!! you made laugh, I'll let it slide "this" time!! What were the white tabs that you used and how did you get them?/
@mrwiback4 жыл бұрын
@@koenigturbo5907 They are plastic rim protectors and you can find them in lots of places if you just google them.
@koenigturbo59074 жыл бұрын
@@mrwiback ok thanks!! I just happen to have a set of brand new rims that have a sturdy plastic rim protectors but they are rounded but I still think they will work. THANKS!!
@vstrom95865 жыл бұрын
how did you balance them
@mrwiback5 жыл бұрын
A friend has a proper wheel balancer.
@PK-pt3qq4 жыл бұрын
- Ładna felga :)
@mrwiback4 жыл бұрын
Cheers!
@falkwachter69543 жыл бұрын
hey, what´s the name of the rim?
@mrwiback3 жыл бұрын
They are factory alloys. Don't know any other name. Cheers!
@falkwachter69543 жыл бұрын
@@mrwiback ah ok Corvette orginal?
@mrwiback3 жыл бұрын
@@falkwachter6954 Oh, yes. They were the factory alternative to the steel rally rim.
@huseinshishani73684 жыл бұрын
Best video on KZbin very genius 👍👍👍👍
@mrwiback4 жыл бұрын
Cheers buddy! 🤗
@charlies.57773 жыл бұрын
@@mrwiback Nice video!!👍 JUST curious, what were you lubing the wheels and tires with @ 0:14 and 1:30 ??
@mrwiback3 жыл бұрын
@@charlies.5777 It's a generic brand tire mounting lube/paste/gel. Google it and you will find a product near you. Cheers for commenting! 👍
@charlies.57773 жыл бұрын
@@mrwiback Thanks for your help. I'll need to get some of that.
@rafars22463 жыл бұрын
Do you set up the pressure coming out to the max?
@mrwiback3 жыл бұрын
Yes, full pressure. Of course I stop inflating as soon as both sides pop and then insert valve and inflate to correct pressure.
@rafars22463 жыл бұрын
@@mrwiback man, thank you so much for answering. Is like no matter how many ways I formulate the question to google all the results were about not overinflating your tires... And I never attempted this, and no video shows how to use the air compressor for this matter. So thank you so much again! Now I just have to figure out if the 2 gallon compressor from Milwaukee would be enough or maybe buy something else electric just for the tires.
@mrwiback3 жыл бұрын
@@rafars2246 what are the specs for your compressor? If it can produce enough pressure you'll be fine.
@rafars22463 жыл бұрын
@@mrwiback Tank Capacity 2 Gallons Max PSI 135 SCFM 1.2 @ 90 PSI Attempting this with 17" and 18" car wheels.
@mrwiback3 жыл бұрын
@@rafars2246 Go for it! 🙂
@tg81505 жыл бұрын
Try doing that on a 45 series new tire. It ain’t happenin’.
@mrwiback5 жыл бұрын
That would look totally silly on my car. 😂
@karkule59194 жыл бұрын
@@mrwiback Of course it would work on a 45 series tire if you are doing it, not some genius who thinks he can fix things from his computer's keyboard.
@anthonyreyes67595 жыл бұрын
What are those plastic rim protection called? Where did you buy them?
@mrwiback5 жыл бұрын
They're simply called plastic wheel rim protectors and you can get them on eBay or in many stores in the US e.g. JEGS. www.jegs.com/i/OTC-Tools/717/4769/10002/-1 I bought mine at Biltema in Sweden. www.biltema.se/bil---mc/mc/verkstadsutrustning/verktyg/falgskydd-2000022154 Cheers!
@GSXR750DOG4 жыл бұрын
The link u provided no longer have them 🥴 Please advice
@mrwiback4 жыл бұрын
@@GSXR750DOG If you search for "plastic rim protectors" on Amazon, eBay or Google you will find a bunch of online shops that will provide them. Cheers!
@rooftopvoter30153 жыл бұрын
Do a 420-20 x 20 now
@tyzok236 жыл бұрын
What did you use to lubricate the tire?
@mrwiback6 жыл бұрын
Thanks for commenting! I'm using a generic brand tire mounting paste/compound. Lots of places sell it. Cheers!
@warrenpacholzuk91905 жыл бұрын
Lmao it is always hilarious to watch someone risk so much to save a few bucks.
@warrenpacholzuk91905 жыл бұрын
@@thedanburyfairracearenahis3095 Lmfao. If you believe that you can do my job as well or better than you are one delusional idiot.
@kschreihart4 жыл бұрын
He is a tire mechanic who does not like someone showing how to do it yourself.
@johnconnolly28154 жыл бұрын
@@warrenpacholzuk9190 were you the one going to mount his tires? If not, STFU. You may be good at your job, but most aren't.
@warrenpacholzuk91904 жыл бұрын
@@johnconnolly2815 not just good jackass. I am the best around.
@hd7585104 жыл бұрын
@@warrenpacholzuk9190 well you got the jackass part right
@mikesecondo22545 жыл бұрын
Good grief!!!!! Use a tire machine!!!!!
@cdnbroncolife18894 жыл бұрын
a tire machine = $100 charge... youve missed the whole point here .. this, you can do yourself.
@mikesecondo22544 жыл бұрын
@@cdnbroncolife1889 good luck..have fun!!
@cdnbroncolife18894 жыл бұрын
Mike Secondo = lazy
@mikesecondo22544 жыл бұрын
@@cdnbroncolife1889 no not really...I own 2 auto repair shops which I bustsed my ass for!!!...lazy NOT!!!
@cdnbroncolife18894 жыл бұрын
Mike Secondo . Ah I see. Well, you’re so successful that you should retire I guess... and just spend you’re retired years trolling you tube and the people that take the time to make decent videos like these. And why not go even one step further by adding comments like yours that are loaded with unwarranted fear inducing tone.... oh wait.. you’re halfway there already...looks like you are successful ;) at one thing