Mounting the DJI O4 and O4 Pro Camera into AOS V5 Frames

[@Dorff_Meister]

Great to see your new line of frames were designed for or easily adapted to the O4 Pro/O4! Nice video. Fly well!

[@fpvstef]

Amazing work! Thanks Chris for making your V5 fully compatible with the O4 Air Unit from day 1! :) Looking forward to mounting them onto my AOS 3.5 V5 (skkyfpv)

[@moonraker814]

The V5 frames are amazing, this looks like a great design. Can we please get some supernovas sized for the AOS 3.5 V5? Thank you Chris for awesome designs.

[@MCsCreations]

Thanks for all the info, Chris! 😊 Stay safe there with your family! 🖖😊

[@MikeMillerDrones]

Thanks Chris. Now I have a drone ready to go when my 04 shows up.

[@catbroh]

😂😂😂😂❤

[@Honk_Honk_Clown_World]

Are you going to design dual antenna mount STLs for the AOS 5 V5 and AOS 3.5 V5?

[@PhysicsOperator]

I love the gold and blue theme

[@propz0ut545]

Guess I’ll need to open up Solidworks and get a mount ready for my Chimera ECO 9

[@BuddsSkyCam]

In your other video you said something about a different mount if you want to use ND filters? What needa to be done differently?

[@JZEFPV]

Did you test the latency of the 4k/100fps mode? I assume the latency would be the same as the 1080p/100? Also did you test if the o4 pro camera is compatible with the standard o4 vtx?

[@Steamkraft1]

very nice to see - nice Video :) - the only thing i can't find anywhere - what is the camera cable length on the standard unit? And, in case you need a longer one, is it the same cable as the o3 unit camera?

[@YaroDrone]

I got the very same question!:)

[@princesfpvdrones]

What about AOS UL7 V5 frame? I am about to build that one with the new 04 unit

[@willcheyney]

Thanks Chris! What is the spacing of the mount holes on the O4 pro camera?

[@ChrisRosser]

M2 x 16mm spacing

[@jasukenneth]

Thank you. What is the tilt of the camera range? Up to 50 degrees available?

[@ChrisRosser]

~60 degrees.

[@vlmiele]

Antenna Stl's do not work with Cine25 V5. The Cine25 has 25mm spacing. Am I missing something?

[@invertedflow]

Any chance for support of the older frames? Like the evo ones?

[@ThomasAndersonFPV]

How about my AOS 3.5 cine evo , 5.5 and 7. They have carbon plates

[@micsherwood4930]

What about the AOS RC 7 series frames?

[@zombietoesofnothing2381]

Do you plan to build 04 antenna w gps mount

[@jpgaming6885]

Will this work for the AOS EVO frames? I have an AOS EVO 5 and just got the O4 Pro

[@AdventureswithQuillen]

Absolutely loved my AOS5 V5 but destroyed 3 arms and the main plate. 🤦‍♂️ Sadly the parts cost makes it not worth rebuilding. 😢

[@wlad792]

Hey! Any plans to support aos ul7 evo frame?

[@MrCaptainnemo]

Looking at the O3 supporting EVO 7 I think you will be able to make it work with Chris's 3D print adaptors for the O4 and Rev 5 frames. Just swap the rubber mount round. I will try it when my O4 arrives. If I have to then I will upgrade my frame. I can make a Voodoo effigy of Chris out my previously perfectly adequate carbon frame parts and throw broken props at it.

[@wlad792]

@@MrCaptainnemo sounds great!

[@ChrisRosser]

You'll need to reverse the outer gummy. I'll add a suitable file to the thingiverse.

[@wlad792]

@@ChrisRosser thanks!

[@MrCaptainnemo]

@@ChrisRosser thanks Chris. I didn't even need to work the Voodoo 😁

[@fabiangerber5574]

Did I see it right that you've only printed the gummy in TPU while the plate was printed in PLA?

[@RichardAFPV]

He makes it clear in the Thingiverse description: Print Gummy in TPU Print plates in TPU or PETG or PLA

[@fabiangerber5574]

@@RichardAFPV You're right, i should learn to read :D

[@htrcs]

Nice!

[@lucalombardo9265]

Stl link?

[@ChrisRosser]

In the description (thingiverse)

[@MrCaptainnemo]

I suppose I can just go and buy the v5 body kit

[@ChrisRosser]

Yep just pick up a frame kit and transfer the build.

[@MrCaptainnemo]

@ChrisRosser thank you. I'll still make a voodoo effigy and throw props at it 😁

[@RazeFPV]

Ohhh, someone's been testing eh!?

[@ChrisRosser]

Just a quick 1hr review and testing video for O4 🤣

[@MrCaptainnemo]

And the other 4 revs of frame... Not watched the video fully yet so open to accusations