Be sure to watch tips 811 & 812 "RESTORING A BULLET VISE". CLICK on this link for my "SHORT SUBJECT" playlist--- www.youtube.co.... Please like & subscribe. #columbianvise#parkervise#emmertvise#machinist#mrpete#viseman
Пікірлер: 411
@normtheteacher54852 жыл бұрын
Happy birthday. Three reasons to use soft metal hammers: 1. Less impact damage to the punch. 2. Soft metals will obturate to the shape of the top of the punch and grab it better resulting in less deflection of the hammer when the impact angle is off from square which it probably will be when punching free hand. 3. Soft metals won't spark if working around flammable materials.
@jimc47312 жыл бұрын
Add, the blow will not tend to bounce but transfer the energy into the punch, thus obviating a movement of the punch off the mark and double punching🤣 Now which mark to use JIM 🤔
@normtheteacher54852 жыл бұрын
@@jimc4731 Good point.
@thomaslawry52382 жыл бұрын
This gentleman is spot on!
@thomaslawry52382 жыл бұрын
Also "soft" hammers don't mushroom the hammer end of the transfer punch.
@4SafetyTraining2 жыл бұрын
Happy birthday
@amundsen5752 жыл бұрын
Wilton Bullet of course!
@NBCRGraphicDesign2 жыл бұрын
Happy Birthday, Mr. Peterson!
@fredohnemus76852 жыл бұрын
Happy birthday! Nine years from now I will still nine years behind you. May your health remain good.
@Siskiyous62 жыл бұрын
Happy Birthday Mr Pete, thank you for all the education. You are America's shop teacher!
@mrpete2222 жыл бұрын
Thanks
@michaeljohnson58812 жыл бұрын
Happy birthday, mr. Pete. Your knowledge is a treasure for us all to enjoy. Hope you have many more to come.
@mrpete2222 жыл бұрын
Thank you very much
@pilgrimm232 жыл бұрын
this man is a NATIONAL treasure!
@HadToChangeMyName_YoutubeSucks2 жыл бұрын
Happy birthday my friend. I'm only 63 but having cognitive issues myself. I'm pretty sure I'm never going to see 79, and if by some miracle I do I probably won't know it. The copper/brass is so you don't mushroom or chip your punch. Norm The Teacher may have some extra points, but in my opinion this is the real reason. Flammable materials don't seem to be a valid reason in a shop where you have lathes, mills and grinders as those also create sparks.
@jameslezak78822 жыл бұрын
Happy Birthday Mr Pete! You're looking great for 79! I hope I'm as spry as you at 79! My first vise I received for Christmas 1972, a 5"Craftsman. I still use it regularly. Decent vise for $99 dollars, big money for 1972. My dad was so impressed with it, that 2 years later I got him one for Christmas. $199 just 2 years later, but still a quality vise, back when Craftsman products were still quality tools. I inherited it when my dad passed. Both are well mounted and used regularly! I have a 3.5" Wilton bullet vise, my go to because of its handier, smaller size. Found it while rummaging thru an old shed that had fallen down. What a prize! 7-69 stamped on key! Another great video, and as usual, thanks for your time and sharing! 👍😎✌️
@gregnoname37072 жыл бұрын
“I think this is a waste, I don’t know why I’m doing it” is something I say practically every I work on a project.
@Duckfarmer272 жыл бұрын
Thanks for the birthday present Lyle - I'm 73 today. LOL Happy Birthday to you - and good Saturday morning with a good video.
@mrpete2222 жыл бұрын
Happy 73
@paulhunt5982 жыл бұрын
I prefer Wilton vises, but also have a fine Parker and a fine Ridged. I gave a nice Yost to a son-in-law that needed a good vise and I didn't have bench space then for the Yost. I prefer to drive my punches and chisels with a bronze faced dead blow by Snap-On. No mushrooming, no skidding and no bounce. Snap-On varies their punch and chisel hardness over the length of the tool. Starrett inserts hardened tool material into the softer knurled and shaped handle. Both methods make these brands my favorite. I have used these brands successfully for 40 years and can only recall breaking or bending one tool. I can't say the same for my other premium brands.
@gregggoodwill93912 жыл бұрын
Happy birthday Mr.Pete Another great video. My favorite vise is my old Reed vise.
@josefernandez62262 жыл бұрын
Happy Birthday Mr. Pete!
@petemclinc2 жыл бұрын
Happy 79th B- Day mrpete! Keep on keeping on!
@matthewlee89172 жыл бұрын
Happy 79th Mr. Pete! Just finishing up a vise refresh myself.
@mrpete2222 жыл бұрын
Thanks
@Raymond.Butler2 жыл бұрын
Happy 79th, Mr. Pete. Pleasure learning from you.
@oddshot602 жыл бұрын
Happy Birthday Mr Pete. I turn 72 in October ... and you are an inspiration to me. Thank you so much for all you do.
@mrpete2222 жыл бұрын
👍👍
@ericcorse2 жыл бұрын
I guess my favorite vise is a Wilton since i grew up with one and have one now. I also added a Starrett but haven't used it much. Happy belated birthday.
@stanwooddave97582 жыл бұрын
Job is not done until **Henry** say's so! Who knew, that Tubal-Cain had so many vice's. It takes a strong man, to over-come his "Mounting" vice's. I just love "double entendre's." It's safe to say Mr. Pete Loves to show off his many vice's.
@franksmodels292 жыл бұрын
Nothing better than having morning coffee with Mr.Pete, Happy Birthday my friend 🎉🎉🎂🎉🎉
@mrpete2222 жыл бұрын
Thanks
@tjr47442 жыл бұрын
More genius work from the birthday boy ... Happy Birthday Mr Pete !! :)
@Kris_at_WhiteOaksFarm2 жыл бұрын
Wish I'd had a shop teacher like you, way back when. I was always college bound, but I never fit that mold. Shop/trades would have been a better direction. As it turned out, I was able to find a path/career in Gardening/Horticulture. Retired now, and puttering in my shop, metal and woodworking. Happy Birthday Mr. Pete!
@pilgrimm232 жыл бұрын
me too
@larry4002 жыл бұрын
You have enough vises that it could be considered a vice by those that don’t understand your love of vises. Happy Birthday! Finally hitting your prime years.
@mrpete2222 жыл бұрын
😀😀
@ohmbug102 жыл бұрын
Happy birthday Mr. Pete! Good idea mounting the vice that way.
@karljacobson15752 жыл бұрын
Happy Birthday Mr. Pete. You get wiser with age!! Have a good one...
@anthonyfox86412 жыл бұрын
Happy birthday Mr. Pete! Answer; to keep from mushrooming the punch head.
@JamesP_TheShedShop2 жыл бұрын
My favorite vise is my Chicago Morgan...why? Because it has served me well for the last 46 years.😁. Thank you for your videos Mr. Pete Happy Birthday
@dalemcinnes18342 жыл бұрын
Hi Mr. Pete , liked the video and would like to say the reason you use the brass or copper hammer is to transfer more hitting power to your punch. At least that is why I like using them and hopefully that is why you like using them. Dale in Canada 🇨🇦
@michaelcerkez38952 жыл бұрын
Happy Birthday Sir. And if I may state, you sure can horse a bench vise around for a 79 year old machinist. Have a cup of coffee on me.
@jimc47312 жыл бұрын
HAPPY BIRTHDAY you young whipper snapper! 💥 Keep up the good work! JIM 🥰
@phillipjones33422 жыл бұрын
Wishing you the happiest of birthdays Mr. Pete and thank you for all of your knowledge sharing by the way I’m 72 and you have more initiative than I
@Hank_Snow2 жыл бұрын
Happy Bday Mr. Pete! Just last night I started prepping an old old tool stand which has a large round cast base to use for my recently acquired Wilton. Very timely video Sir. Have to find another for a baby Prentiss Bulldog.
@mrpete2222 жыл бұрын
👍👍
@donmittlestaedt11172 жыл бұрын
Happy Birthday youngster. There are people older than you, you know. I'm one of them. Who you kidding? The last vise? You are addicted. There are many more vises in your future. A junky never has enough. In fact, that is why I have watched you for so many years. I'm hooked too. Thanks for the fix.
@mrpete2222 жыл бұрын
😀😀
@pilgrimm232 жыл бұрын
Lyle: I used a similar solution mounting a reloading press to a bench. After about 1000 rounds reloaded, it has worked like a champ. Thank you Sir; you show how to do the work. I did my work on a Horror Frought Drill press. I am about 10 years your junior. Happy B-Day Mr Pete. You have taught me... a boat load...
@pilgrimm232 жыл бұрын
by the way, that Wilton is GORGEOUS!!!!
@mrpete2222 жыл бұрын
👍👍👍
@LostMountainRestoration2 жыл бұрын
Happy Birthday. You're doing fine. Thanks for all you do and best regards.
@veejaybomjay81452 жыл бұрын
Happy, Happy, Joy, Joy!! Happy Bday Mr, Pete wishing you many more. Favorite vise Classic Acme.
@mrpete2222 жыл бұрын
Thanks
@simonilett9982 жыл бұрын
Happy Birthday Lyle🎂. Soft faced hammer won't damage/mushroom the relatively soft steel tail of the punch, so avoids risk of chips from punch becoming dangerous projectiles👈👍🇦🇺
@ianmills6692 жыл бұрын
Happy birthday from South Australia Lyle! 79 years young and still an inspiration!!!
@josephpetito13512 жыл бұрын
Got one of those Wiltons in the classroom for twenty five years--indestructible
@alexduke54022 жыл бұрын
Another idea that would have been maybe easier for a home shop guy is. Use the plate as the nuts. Drill and tap the plate run the bolts up through the bottom of the table, and screw them onto the plate with a little loctite. Then grind\flap disk of the protruding threads! Bam, flush mounted bolts into a plate without a milling machine!
@jdavidkatz2 жыл бұрын
Happy Birthday, Mr. Pete. Excellent video. You are a national treasure.
@mrpete2222 жыл бұрын
😀😀😀
@johnfriend2402 жыл бұрын
Wow, I just sold a bench lathe so I could have a bench in my shop and mount for the first time my Dad's Columbian 504M vise on the corner. The bench has 2" square tube all around and I was thinking I had to mount the vise inboard more than I'd like. Now I know how to do it! Thanks Mr. Pete!!!
@mrpete2222 жыл бұрын
👍
@bobcollins37622 жыл бұрын
I recently purchased a Reed 106 at the Brimfield flea market in July. After having several Colombian, Parker and a couple of Wilton vises, I now feel that the Reed is my favorite vise company. Great video Mr Pete, thank you for your wisdom and sharing it with us!!!!!!
@mrpete2222 жыл бұрын
👍
@peteengard99662 жыл бұрын
Happy birthday Mr. Pete. And hopefully many more. I love the Reed vises with the lip that butts on the front of the bench. Thank you.
@johnmccrane16602 жыл бұрын
Happy Birthday, Mr Pete. I would have marked the holes for a wilton and then any other holes as vise holes. Also I use fender washers up against the wood side to spread the holding force. Soft faced hammers won’t mushroom the punch.
@daviddauphin8382 жыл бұрын
Happy Birthday and many more.
@ottomakers2 жыл бұрын
The alignment pin is a great trick for when it really matters. Good workmanlike practice in casual shop projects pays off.
@sunriseboy4837 Жыл бұрын
Well called.
@imknot2 жыл бұрын
Happy birthday Mr Pete. I have always worked with what ever vice I had at hand, I couldn't tell you what brand they were, I didn't care. Now that I have my own work shop I have acquired too many vices but I have a 4" Wilton bullet vice and a 6" Wilton bullet vice The 6 inch is a monster. they are both bolted to a short 4'6" X 4'6" bench that has a 1 5/16" steel top on it. I don't know where the bench originally came from but I have had it for most of my life. What a work horse of a bench. I drilled and tapped the holes that mount the vises. And yes I did overhang the vice so long items will miss the bench top. I am also saddened when a vice is improperly mounted. I thought maybe you would have drilled and tapped the plate so it could have been bolted from the bottom the same as the vice was mounted. Wonderful video Mr Pete. Thank you
@llapmsp2 жыл бұрын
Happy Birthday Mr. Pete. Thank you for what you do.
@johnquinn38992 жыл бұрын
HAPPY BIRTHDAY Mr Pete !!!
@batch56262 жыл бұрын
Happy Birthday Mr. Pete! You da man..
@SpringRubber Жыл бұрын
Somehow I overlooked this mounting video when you originally posted it last year so I'm glad it showed up in my feed again. Thumbs up on the approach and instructions! Mr. Pete: you'll be happy to know that when I mounted my first vise, a 4-inch craftsman with a swivel base, I took great care to position the holes so there was clearance to hold a long item held vertically. True for when the vise jaws were parallel to the front of the bench as well as when swiveled to the side of the bench. It came in handy more than once, as I recall. Later I saw a friend's setup where he mounted the same 3-hole swivel-base as mine - but he mis-oriented the base so the vise could only be swiveled part of the way over the side of his bench. I never looked at him the same again. 🤣
@mrpete222 Жыл бұрын
👍👍👍
@Mad-Duk_Machine_Werkes2 жыл бұрын
I have (4) different FPU-Bison vices from Poland - The front jaw is fixed and the rear one slides of Dovetails - Problem is, Bubba usually owned them and you have to repair broken dovetails...... Still love them
@mrpete2222 жыл бұрын
I just saw two vices like that when I visited Jimmy’s motor rebuilding in a recent video. I remember when his dad bought those vases in the 60s and showed them to me. I was shocked that The rear jaw moved
@sky4you2b2 жыл бұрын
Happy Birthday Mr. Pete 🙂
@mikebarton32182 жыл бұрын
Happy birthday Mr. Pete !! We need to do something very special for you a year from now 👍🍾🎂
@mrpete2222 жыл бұрын
You mean if I’m still around?
@67L-882 жыл бұрын
Nicely done my favorite part is when you mention keeping the front jaw far enough forward to clear the bench. So many are not installed properly and you lose so much versatility. One thing I try to do when mounting on a sheet metal leg bench is, actually use the leg. I will try to get a mounting bolt through the leg and tighten the package up. It seems to make the leg-to-bench connection stiffer and I don't worry about the wood screws pulling out. In my shop we have had Parkers, got them forty years ago and they were old then. Some are showing wear and a butcher broke off a screw, all fixable. Happy birthday, you are a month younger than my parents would have been! Many more to you!
@mrpete2222 жыл бұрын
That is a good idea with the table leg
@stevenhavener73272 жыл бұрын
Happy Birthday Professor Peterson !!!!!! thank you for all you do , best regards Steve
@mrpete2222 жыл бұрын
Thank you
@vicpatton52862 жыл бұрын
Hi Lyle Happy Birthday! You are going strong in my opinion so Keep It Up..😀 regards vic
@stxrynn2 жыл бұрын
12:40 It takes a while to do it once. It takes longer to do it wrong once then right the next time. I try and remember that. It's speaks to craftsmanship. And you, Professor, are that kind of guy. Do it right the first time. I am a bit surprised you didn't make one out of wood first, but I'm okay with that.... this time! Thanks for the lesson!
@elsdp-45602 жыл бұрын
Thank you for sharing. Enjoyed.👍👀
@2jz4me252 жыл бұрын
Happy birthday Mr. Pete! Absolutely love you and your channel, sir.
@adamgarrison44002 жыл бұрын
Wilton all the way and Happy birthday.
@Raymond.Butler2 жыл бұрын
To keep from flailing the punch butt end.
@uxoriousone68342 жыл бұрын
Happy Birthday!
@bobbyw90462 жыл бұрын
Mr. Pete, All I can say is that I have had my USA made Wilton 5.5" vise mounted in my workbench for almost 40 years now - so I guess it has served me well - as I have no plans to replace it. There may be better vises out there, but I've never had the impetus to really look. The only other vises I've owned was when I was younger and could only afford small and cheap vises. I never had a Chinesium vise (never will) but I did have some small cheaper USA made ones when I was a teenager. There are very few USA made high quality vises made today and if I was in the market for a new vise or a second one, I'd more than likely buy a gently used one from yesteryear.
@jacquespats21282 жыл бұрын
Happy B day. may there be more videos and happy 'teach machining' days. besides your teaching videos which i (51)thoroughly enjoy and learn from often, there is only 1 other machine shop video maker whom provide the same help (mostly milling and lathe work) and helped me alot with machining in what i need to do for myself
@mrpete2222 жыл бұрын
Thank you very much, I am glad you like the videos
@rcurry85312 жыл бұрын
Happy birthday Mr Pete
@nbwoodwinds30652 жыл бұрын
Happy birthday Mr Pete!
@leeroyholloway42772 жыл бұрын
Happy Birthday, Mr. Pete. Always a delightful and interesting presentation.
@mrpete2222 жыл бұрын
Thanks
@bertjankosters2 жыл бұрын
Congratulations Master Pete!
@juansimon58022 жыл бұрын
Happy Birthday Mr Pete
@MegaBCAD2 жыл бұрын
Happy birthday from Western Australia Over here we only really have one Vice worth owning it’s a dawn I have one in every size in a engineers style an offset and few drill press vices and a post vice in all I have over 20 Different vices P.s I don’t a have a problem I have a Collection
@EVILDR2352 жыл бұрын
HAPPY BIRTHDAY Mr. Pete.
@mrpete2222 жыл бұрын
Thanks
@4speed3pedals2 жыл бұрын
Happy Birthday Lyle!!!!
@angelramos-20052 жыл бұрын
Happy birthday Sir.Good work and very nice yellow strap clamps in your milling machine.Thank you.
@brianbowman54022 жыл бұрын
Happy Birthday Vice Man
@tarz93862 жыл бұрын
LOOKS GOOD. I like Wiltons and Parker.
@mrpete2222 жыл бұрын
Thanks
@craigsudman45562 жыл бұрын
Wow I love the virtual hardware store Lyle. I've been collecting hardware (even Ann picks up hardware on her walks for me) for 55 years and have them in buckets that I've called Miscellaneous Bolts Large and Misc. Small. My real small machine bolts are in plastic drawer slides and go down to No. 2's and eye glass bolts. Great video thumb ups.
@dalebennett81692 жыл бұрын
Happy Birthday Mr. Pete.
@mrpete2222 жыл бұрын
Thanks
@bh.boilers2 жыл бұрын
A very happy birthday to you Mr. Pete, the overwhelming vise brand in Australia is the Dawn brand. Ray.
@mrpete2222 жыл бұрын
Thanks
@peterhaan90682 жыл бұрын
Happy Birthday from a fellow doddering old fool. Henry you are one very lucky grandson!
@mrpete2222 жыл бұрын
Thanks
@blondin072 жыл бұрын
Happy Birthday, Mr. Pete.
@mrpete2222 жыл бұрын
Thanks
@123232ism2 жыл бұрын
I bought the plans for the Fireball vise and built it about a year ago. It beats every vise I ever had. The clamping force is phenomenal and the build quality is rock solid. Jason has a design that brings the best of vise features in perfect harmony.
@mrpete2222 жыл бұрын
👍👍
@michaelmaloney10272 жыл бұрын
Happy Lyle. I always enjoy your videos, I learn something new every time. My a six-inch Record, Used to be made in England and sold widely in Canada. It is pity they are no longer available.
@lathammarx14587 ай бұрын
Favorite brand of vises is the Wilton, I have the 4" from my Grandfather, that he repaired with nickel arc welding before I was born, it was on his bench my whole childhood, now it's on mine.
@mrpete2227 ай бұрын
👍👍
@wyattsdad85616 ай бұрын
This is a great channel Mr Pete. I’m at the age of 53 now, where I could’ve been one of your students. I always tell my dad about the different stuff you do on your channel in hopes that he will check it out too. He just got streaming tv and now watches a lot of stuff on KZbin. It’s only been about a month tho so he’s still figuring it all out. He used to be a tool and die maker so I know he’d be able to relate with your content. Anyways I’m home today because my work truck blew a spark plug out of the head so it’s at the shop waiting to get fixed. So I’m watching some more of your vids. Even the ones I’ve already seen. :)
@mrpete2226 ай бұрын
👍👍👍
@christurley3912 жыл бұрын
Happy birthday. Thanks for the video.
@FloridaTwoWheelAdventures Жыл бұрын
I recently inherited my Grandfather’s Prentiss vise made sometime prior to 1948 in our hometown of Watertown, NY. It’s a Bulldog #55 and is not in the greatest condition but serviceable nonetheless. Mainly, it’s a heritage piece for me since he owned it prior to my life even beginning. Likely before even my father was born!
@mrpete222 Жыл бұрын
😀😀
@KimbrellBrad2 жыл бұрын
Happy Birthday Mr Pete! Hope you have a great day - you certainly deserver all the happiness you can get yoiur hands on! You have taught and entertained all of us for soooo long. Great to see you still pumping out videos! Just mark down another one and heading for 80! And the copper hammer is so you don't mushroom your punches.
@mrpete2222 жыл бұрын
Thanks
@kevinbaird97632 жыл бұрын
Happy Birthday Mr. Pete.....and many more to come. Good video!
@mrpete2222 жыл бұрын
Thanks
@RonEntropy2 жыл бұрын
Happy Birthday Mr. Pete! You Don’t Have Any Cognitive Issues at all. Your nuts and bolts are still on tight & secure and looking good. …Unlike that guy Joe who lives in a White House somewhere up in the northeast side of the woods, now he definitely has a big time Cognitive Issue. Have a wonderful birthday and many more sir 👍 love your videos!
@100yojimbo2 жыл бұрын
Happy birthday Mrpete hope you had a nice birthday. And great video as always 👍👍
@mrpete2222 жыл бұрын
Thanks
@edl50742 жыл бұрын
HAPPY BIRTHDAY nice work as usual !!
@mrpete2222 жыл бұрын
Thanks
@davidstansbury32042 жыл бұрын
Happy Birthday 🎉. You are the vice man, you give good advice. As always thank you for your time and knowledge
@mrpete2222 жыл бұрын
😀👍
@624Dudley2 жыл бұрын
My favorite bench vise? The Starrett, of course! Happy Birthday Mr. Pete
@c0mputer2 жыл бұрын
I have a Paramo hi-duty vise. Made in England. Nice looking vise. I have a Colombian too which I use more though because it’s larger.
@strongandco2 жыл бұрын
Happy Birthday Mr Pete. I've only ever known Record bench vices, I've seen them heavily abused but never seen them break. At some point, probably in the 90's like with so many things they were redesigned to keep the accountants happy and they don't looks anywhere near as robust and wouldn't buy one. Luckily my ancient vice will never break but if it did you can always find decent quality older models on Ebay for not a lot of money. They don't look fancy but they do a great job.