Mountune Sound Suppressor Block Off Install HEAR THE DIFFERENCE

Getting rid of a loud howling type noise for a louder distinct turbo spool and recirculation air release. Please remember to like and SUBSCRIBE to my channel for more instructional videos. For more information on the SSC Block Off or to purchase visit www.mountuneusa.com/mountune-S...

[@tomkennedy6458]

Thanks for showing how it actually comes out

[@dougsherwood5123]

Chris, keep up the good work! Love your videos. You should spend a few seconds explaining why you're installing the parts as well. I'm sure people are interested in why, and what results you expect beforehand. Thanks to your videos, I'm going to make a few of these installs!

[@ChristopherAyresfrs2]

+Doug Sherwood No problem, and that's a great idea I never thought off I will start incorporating into my videos. Thank you for the advice and for watching. Feel free to comment during any of your installs. One thing I do. Ether than a lot of KZbin creators is answer every single comment I get!

[@caoYB]

Thanks for sharing

[@timbrownridge5022]

Good upgrade I'll change mine asap

[@mralieka]

as always, great work!

[@ChristopherAyresfrs2]

mralieka thank you sir. Should have a lower engine mount install up by tomorrow. All the others I can find describe a RS but show them doing a ST which is quite different.

[@vincesplc]

sounds well NICE!

[@dukedaz8920]

Great vid thanks 👍

[@ChristopherAyresfrs2]

Thank you much!

[@johnpiccioli650]

Hi Chris, enjoy watching your videos. Keep them coming.You mentioned that you have the car on ramps. I bought ramps to do some work on my RS but had to return them. The car was too low to mount the ramps. What ramps are you using to mount your RS?

[@ChristopherAyresfrs2]

John Piccioli 54" Race Ramps. About 250 on Amazon. Perfect fit.

[@johnpiccioli650]

Christopher Ayres Awesome! Thank you Chris.

[@ChristopherAyresfrs2]

+John Piccioli Thanks, I'll keep them coming. Have something big for summer. 2.3 liter big, with a few internal Installs. A trip to Mountune. All kinds of good stuff!

[@johnpiccioli650]

You have me very curious now. Looking forward to it.

[@ChristopherAyresfrs2]

John Piccioli should be quite the adventure. I'm going to give you guys a ton more in car video as requested on mods and some travel videos in the RS from Michigan to California plus some Mountune in house build videos!

[@chrismersits3504]

Pretty lucky with the orientation of your snap ring holes. Mine are located at like 10 and 11 o'clock. I'm probably going to need to have the car on a lift with get in there with the pliers or get a special pair of pliers with extra long ends.

[@ChristopherAyresfrs2]

Just use a 90 degree pic tool and turn it until it’s better suited for access.

[@chrismersits3504]

Christopher Ayres I tried for about an hour yesterday with the car jacked up and the wheel removed. The top of the resonator cap is too tall for the 90 degree clips to reach the holes and trying to get at it from the other side seems physically impossible without the car lifted up.

[@chrismersits3504]

Following up for anyone else that's struggling with this. I was able to use some WD40 and one half of the circclip pliers (a strong skinny pick would also work) to rotate the snap ring and get better access. Then a pair of 45 degree circlip pliers did the trick!

[@ChristopherAyresfrs2]

To add. Buy good snap ring pliers. The Autozone or Advanced Auto brand may work for you but take twice as long and are twice as frustrating as a solid pair of even craftsman or channel lock brands.

[@AlanXR6]

Hi Chris ... Does the RS get this whistling phenomenon after the high flow air filter and induction pipe gets installed? Our RS doesn't have any whistling noises that are noticed in it's current stock form. Will that change if we fit the filter/induction pipe in the future?

[@ChristopherAyresfrs2]

Alan Xr its more of a honing noise. I don't know who started the whistle noise. It's a low frequency hone.

[@ChristopherAyresfrs2]

Doesn't I just sound cleaner? A lot less mixes of noise. I've got an oil baffle coming. Under pipes.

[@jkl6648]

I need to do this myself.. My sound suppression chamber is just sitting in the garage waiting to get installed. FYI, your title is really bugging me.. I think you want it to say "HEAR" the difference :)

[@ChristopherAyresfrs2]

Jeff Lange gotcha ;-)

[@tacotots_132]

What does it do???? Explain?

[@patrickcorrigan591]

hey Chris, I've been trying for hours to get the c clip off the sound suppressor chamber. how did you get your hands in there and able to remove the clip? any advice would really help, I'm going crazy...

[@ChristopherAyresfrs2]

+Patrick Corrigan Pat, are you using straight or outward circ clup pliers? The should be trying to pull open if used correct. I found that removing the front wheel made the access easy. You want to make sure you get one plier prong in the hole of the clip, then while keeping that set maneuver the other into a he other hole than compress the pliers which should widen them at the clip opening up the clip. All fails; get a pic tool in there and stretch the clip a little bit by moving it in and out in its guide. It's pretty stuck from the factory but if you can move the clip around the ssc to loosen it up it becomes easier to grasp both sides of the clip.

[@patrickcorrigan591]

thanks! I'll try again this weekend

[@ChristopherAyresfrs2]

+Patrick Corrigan as soon as you can rotate the clip a lot of tension comes off it. Also I'm assuming your using cheaper circ-clip pliers. A good pair will make the job a bit more easy. Usually ones that are not rotatable.

[@patrickcorrigan591]

how'd you guess lol! I'll get a better pair of circ pliers. thanks for your advise and your videos!

[@ChristopherAyresfrs2]

+Patrick Corrigan Because I did the same thing. Lol. Thank you Patrick!

[@daytonwhittle7592]

Like to pay you to work on my rs

[@jmelinte]

Can you please post a link to those clips you mention just before the install?

[@ChristopherAyresfrs2]

+John Melinte if you go to Mountune website it is on that part under install instructions.