iPad mini 2 Touch screen replacement

[@MovilonePhoneRepair]

*✅ Tools HERE* 👉👉 https:movilone.eu

[@XpertLevel13]

Where can i buy the corner repair tool? Thanks!

[@ChrisGrayson]

The insides of mine look slightly different. Hmmm… Not comforting. The start button side has a little more complicated tabs, that appear screwed into place, holding down that end of the screen, that don’t seem to exist in yours.

[@ariffikri7369]

are you glued the screen??

[@MovilonePhoneRepair]

Hello, Arif! The touch screen has it s own glue and I put 4 drops of B7000 in the left, then applying heat and ... it s sticks well.Have a nice day www.movilone.es

[@marcorenzo1008]

Which is the right temperature of heat gun to remove the broken touchscreen?

[@MovilonePhoneRepair]

Hello, Marco! The right temperature is 90 degrees. Thank you for your comment. Have a nice day www.movilone.es

[@marcorenzo1008]

MovilOne thanks so much.

[@MovilonePhoneRepair]

Thank you too, Marco! Best regards www.movilone.es

[@Rene_vlog]

Is the turn on and off screen when cover case still working after the digitizer replaced? Mine is not working anymore after digitizer was replaced even if i returned the 2 small magnets on the sides.

[@MovilonePhoneRepair]

Hello, Re ne! It should work with changing the screen...review the assembly process! Best regards and thank you for watching!

[@Rene_vlog]

Reparacion moviles Granada i dont know why mine is not working anymore 😢 im still using my case before replacing the digitizer. The reason I replace it is because its already ghost touch and halfside of the screen in not working or cannot be touch. Is it the two small magnets that do the opening and closing of the back light when closing or opening the case?

[@jailim685]

This tutorial blew my backlight fuse!! Not i have the trouble which only professional can solve!! Should have the step to remove the battery connector before removing the digitizer, lcd connectors or anything else. Also more important, the battery should be unplugged when you are going to connect them back!! I don't mind a bad tutorial, but this tutorial will do harm more than good! Please take this video down or reupload with the proper steps!!

[@mattm2957]

Can u use a hot hairdryer for the heat gun

[@MovilonePhoneRepair]

Hello, Matty M! Yes, you can! It's a frequent question in my videos :) Thank you and best regards!

[@GuhaSomebody]

После замены ЭТОГО стекла Ipad продолжил выключаться при закрытии чехла?

[@federicoluceri7460]

scuse me... but can I use an hair dryer ???Thanks Have a nice day!

[@MovilonePhoneRepair]

Hello, Federico! Yes, you can! Thank you for asking! Have a nice day, you too!

[@michaelmahoney6583]

im fixing mine right now!!!!!!!! thx

[@MovilonePhoneRepair]

Hello, Michael! Glad to hear that! If you have any question i ll be glad to answer it! Wish you good luck!

[@bombompurin2998]

I’m bout to put a part mah whole ipad just to see if this works 😼

[@jailim685]

This tutorial blew my backlight fuse!! Not i have the trouble which only professional can solve!! Should have the step to remove the battery connector before removing the digitizer, lcd connectors or anything else. Also more important, the battery should be unplugged when you are going to connect them back!! I don't mind a bad tutorial, but this tutorial will do harm more than good! Please take this video down or reupload with the proper steps!!