MOZA Wheelbase Setting Guide for Automobilista 2

[@jJustPlayingNZ]

After having had my Moza R5 for quite a while and having spent a LOT of time playing with settings in Pit House I have made a rather fascinating discovery. The ONLY settings I set in Pit House Basic Settings are the Maximum Steering Angle (900) and the GAME Force Feedback Intensity (100). The ONLY settings I set in the Advanced Settings are Maximum Output Torque Limit (100) and Steering Wheel Inertia (set to my wheel type (100)). I then set up an appropriate FFB Effect Equalizer for the effects. In the Sim I set the FFB settings to the same settings as I had before getting the Moza R5 Wheel. If I want to adjust the feel after the above setups then I raise or lower the GAIN etc IN THE SIM. I have found that this saves me having to try to juggle all the other settings in Pit House and gives me the feel I want. This has also worked for me with Assetto Corsa. These are my main Sims that I use. It might not suit everyone or every Sim but if you want to try to avoid spending time messing with Pit House maybe it will help you.

[@b9bot148]

Loving my Moza R5 bundle. Really great that they have you helping people like me to get the most out of my new Moza R5. Already watched your Moza setup for Assetto Corsa Competizione. Works really well. Appreciate you!

[@paulorogerio1894]

Congratulations on the channel. I recently bought a moza R12. Is the configuration the same? Do you intend to make a configuration for the R12?

[@heathergreylive]

I have been struggling with rapid oscillation on-center in AMS2 and this guide eliminated it completely. Thank you so much!

[@simionb.818]

me too! but also with this setup...😢

[@aker2KK]

Thanks for the series; they help to understand the settings available from Moza.

[@williamwilson4705]

Super helpful, thanks. I've ordered an R5 so this will get me prepared in advance for it arriving in two days 😁

[@scotthiland5521]

This is great stuff. Will give it a go as AMS2 just feels so disconnected for me atm. Would appreciate an episode about the process in how one goes about tuning the game and the moza profiles as a combination. More specifically how one would systematically go about this. I just feel overwhelmed and lost at times. I have ACC feel ok, but i still feel a sense of being disconnected to what the car is doing.

[@theodoreschultz4685]

Will this be updated at any point because with either the changes to the pit house or AMS2, no shot these are still good settings for the R9.

[@MOZARacing]

We appreciate your feedback, and we understand that settings may need to be updated for different games or software versions. We continuously strive to provide updated tutorial videos. And we recommend joining our Discord community. In the Discord community, you can connect with other members, including our technical team, who can offer support, share game settings, and provide valuable insights. 😊 discord.com/invite/CCBgHxJAdX

[@MötziW]

Hello, thank you for this great Video. The settings are very good. Do you have a tipp to sync the Moza wheel with the wheel in the car? If I turn the Moza wheel 90 degrees, it's about 70 degrees in the car. I did the calibration in AMS2.

[@Gingala93]

Unfortunately i have got the same problem here. Did you get any comment on this? Is there a way to fix it?

[@MötziW]

@@Gingala93 In the Moza App on PC, I have set the wheel to 540 degrees für AMS2, and for Assetto Corsa I set to 900 degrees. That works fine for me. Greetings Peter

[@Ichwiebrot]

The only way your brand can get any better is if you get console compatibly, (for gt7) the quality to price on your products is incredible though! Keep being a company I support

[@sim_racing_pops1675]

Will my bro your a legend Your set up videos for ams2, acc,iracing have to helped me so much

[@steffendetrick]

How do you map menu control. Like on the G923 the x button was except to move forward. Do I have to jump back-and-forth with the keyboard mouse in my wheel? If that’s the case, that’s not going to work ill stick with the 923

[@Very_Grumpy_Cat]

I can not set my bindings in AMS2. I game i have the wheel to custom, then I want to bind my controls but the game does nothing. For example bind "ster left" then I ster left on my wheel but the game does not bind it. Or if i want to bind any buttens the game again does nothing. I can not bind my control. Do i need to configure the wheel on pit house or what?

[@antoinebertholier8318]

Do you have any news about that ? I have the same issue

[@Very_Grumpy_Cat]

@antoinebertholier8318 I can not remember what I did. For me, it works now. The moza software broke my pc, so I had to restore it by reinstalling Windows 10. I think that is how I solved the binding issue. But I did not restore my pc just for that reason, I also had other problems in different racing games. Sorry I do not have an answer. I was frustrated my pc ran slow, so I tried everything I could and something worked and I do not remember now.

[@antoinebertholier8318]

@@Very_Grumpy_Cat okay thanks man 👍

[@andreasbrandt421]

I am using a R9 with GS V2 Wheel. My question: is there any way to use the joystick button for menu navigation? It used to work with my old G29.

[@MOZARacing]

You can configure this in-game. For more guidance, feel free to join our Discord community, where enthusiastic players and users are ready to assist you. 😊 Join us at discord.gg/CmdxsvH3g7.

[@Prof.Mokster57]

Game cant recognize my R5, followed the steps on MOZA's website for the Project Cars 2 thing in AMS2 but with no luck still any recommendations?

[@MOZARacing]

Could you send more details to our support team email? Providing additional videos, images, and screenshots of your settings would help us better understand your issue. Or you can join our Discord and DM a support staff member for quick responses and assistance as well.

[@alejandro3547]

If you download the "Automobilista 2 Demo" the Moza wheel can't be detected when I turn, the Moza launcher didn't work with the game demo

[@saltaortigas]

I have a problem with my FSR wheel. Basically, when I play AM2, the display doesn't work, just show gear N and the rpm indicator doesn't light, but the buttons works. What could be wrong?

[@MartinJacobsz]

I also had this problem in game you have to go settings - system - use shared memory is project cars 2 - udp frequency to 1 - udp protocol version to project cars 2 amd then save i think you have to restart game just to make sure its 100%

[@saltaortigas]

@@MartinJacobsz it worked, thank you so much :)

[@jens_jensemann]

what settings are you using for the r5 and ams2?

[@MOZARacing]

Hi, for more detailed discussions on game parameter settings, we highly recommend joining our Discord community. There, you'll find some channels, including ones specifically dedicated to product and game parameter recommendations. In these channels, you should be able to find the advice and settings that best suit your needs.

[@Kylosgrande]

Any news on an Xbox compatible Moza R9? F1 23 is releasing soon, would love to go with Moza over Fanatec

[@dudogersak]

Hi, are you planning a video for rFactor 2?

[@pajomota64]

Cant get my SRP pedals to be recognized by AMS 2. Have a R9 with a GS V2 wheel and SRP pedals. It says pedals not set up!!!

[@blueferrari397]

Quick question though. I currently have a Fanatec DD1, which you can adjust FFB on the steering wheel LED screen, while on the fly, in-game. Can you do this with the LED screen on the Moza FSR wheel? I'm looking to ditch my Fanatec gear for good, as just so disappointed with the products/service. So, looking for a good alternative - either Moza or Simagic.

[@cristikreatine]

yes you can change ffb -damper -road sensitivity and max angle whit fsr weel while you are racing

[@jrrs8692]

Nice guide! However I am struggling with the feel of the wheel at turning, the details and feedback are great, but while turning it feels sluggish, I turned down gain to 50 and FX to 60 and it helped a bit, but still feels too sluggish. Any idea what setting can help?

[@theodoreschultz4685]

Try tuning down the natural inertia and or raising the maximum wheel speed.

[@CW-yp9jo]

im on an r5 and for the most part it feels good but there is still a feeling of sludge that i dont get on any other sim title. Is there any way to fix this or not?

[@MOZARacing]

If you're encountering sluggishness or any other issues, please don't hesitate to contact our support team at [e-mail]. They'll be happy to investigate further and provide guidance to ensure you get the most out of your R5 setup.

[@Hermann_58]

Hello, very informative post. I bought the Wheelbase R9 and the first problem I had was that the wheel didn't connect to the base. Apart from that I am not able to calibrate the steering wheel in Automobilista II. What am I doing wrong. Is there a trick? Everything is displayed correctly in the Moza software. I live in Germany myself, and unfortunately I don't speak English, so I have to use Google Translate.

[@theodoreschultz4685]

Use the “generic DD wheel” in the calibration screen.

[@Hermann_58]

@@theodoreschultz4685 Many thanks for your response. The problem starts with the wheel not establishing a Bluetooth connection with the base. I have returned everything and am waiting for a replacement. Then we'll see.....

[@MOZARacing]

Hello, thank you for your comment. We are glad to hear that you found our post informative. We are sorry to hear that you have some problems with your Wheelbase R9 and Automobilista II. There might be some issues with the connection or the calibration settings. You can try to join our Discord group and ask for technical support there. Our group members and technical team will assist you and guide you through the troubleshooting process. Here is the link: discord.com/invite/CCBgHxJAdX Alternatively, you can contact us by email at [e-mail] and we will help you as well. Thank you for choosing Moza Racing! 😊

[@wecrashgames]

Can i get one?

[@aleksanderulitin3954]

RaceRoom RaceRoom MOZA R5 - no detection when the car is standing still, feedback - only when the car is in motion, and MOZA R9 - when the car is standing still, there is feedback, there is resistance of the wheels when you turn the steering wheel I'm posting here because I don't know where to post.

[@AceTritis]

Hi, I have the R12 with the ES and the FFB of AMS2 does not work, I made the corrections indicated on the Moza page, Proyect cars2 settings, etc., but it does not work, it is very frustrating.

[@jamesl2841]

Hey mate, I’m suffering the same issues, hopefully in the 2 months since your comment you’ve found a fix?

[@tommy87_888]

Hello... I have a moza r12 too. First Time of playing ams2 you have to calibrate the wheel in the in game Menu of ams2.... When the wheel is calibrated it works in ams2 very good :) sorry for my bad english

[@Zeeem99]

Will, love your videos mate and I really (really) appreciate the explanation of what everything does in my new MOZA software (I have a DD wheel, yay!!!) but mate, your settings make the wheel way too heavy. Even idle, the wheel was trying to oscillate itself off the base!

[@Simmymind360]

I have the Moza R9 and cannot get the FFB to work..I'm feeling nothing at all..any help would be appreciated

[@danvel37]

You need to setup on system as project cars 2 then 1 then project cars 2 again

[@xgamer914]

Hi moza could please make an offer to the r9 v2 and es wheel with formula mod or cs wheel. Thanks 👍

[@JoanSamblancat]

When i put road sensitivity to 10, vibrations are really hard in the wheel (like really really extreme and its uncomforatable). Is this normal or is it just i need to callibrate something else? Thanks

[@MOZARacing]

While personal preferences for force feedback intensity can vary, we recommend joining our Discord user community where you'll find many enthusiastic members discussing and sharing their game settings daily. You can access our Discord server at discord.com/invite/CCBgHxJAdX. The community there is extremely helpful in dialing in the perfect vibration and force feedback levels for your preferences.

[@kosdf123]

Sorry, could you make support for city car driving??

[@MOZARacing]

Thanks for your suggestion! We'll consider that. 😀

[@MICHALMASEK31]

i cant bind my MoZa R9 in AM2 or PC2. I cant confing it in Moza pit box. Could you give some tips ?

[@MarcinKanonik]

first: options > controls > edit assignment

[@jimgatts8919]

@@MarcinKanonik ya same issue with my R21, under control schemes there is no Moza, there is fanatec, logitech, thrustmaster etc... so someone said to use "direct drive generic" which i did but when i go to edit assignments it does not detect the axis for steer left or right. Is there something im doing wrong?

[@MarcinKanonik]

@@jimgatts8919 you did it ? "Open the game, go to OPTIONS -> SYSTEM and set the following parameters: Shared Memory is set to Project CARS 2 UDP Frequency is set to 1 UDP Protocol Version is set to Project CARS 2 "

[@scotthiland5521]

​@@jimgatts8919I found that if you use custom and calibrate that. Then switch to generic DD then it'll read it. That is what I found that worked for me.

[@Mr.Carter777]

can u moza on Ps5 gran turismo game?

[@artyfacto.4948]

Thanks 🙏🏽

[@360hackern]

These settings make my R5 wheel oscillate badly when braking to a full stop or even sometimes when i start the engine. It vibrates my hands of 🙈🙈. Any suggestion for a solution? 🥰

[@MOZARacing]

Hi, these recommended settings may vary depending on individual differences. We suggest joining our Discord community where you can find shared information about game parameters and base settings. There are many players in the community who are happy to help, and they may have encountered similar issues. We recommend participating in the community discussions to promptly resolve the problem. Thank you for your support and involvement! 🥰 discord.gg/CmdxsvH3g7

[@simionb.818]

I set everything exactly as shown. but still have a horrible oscillation around the 0 position. What can I do against it?

[@theodoreschultz4685]

Try increasing the wheel friction

[@cgfoto7199]

I can't connect my Moza SR-P Pedals to AM2 for some reason. The R9 connects, but the game dosen't give me anything when trying to assign the pedals😢 Does anyone have a fix for this? 🙏

[@ciaranmchugh4246]

Are you going to do iRacing at all?

[@MOZARacing]

Thanks for your comment, please make sure you subscribe to our channel, there will be more guide videos to be uploaded. 😁

[@MOZARacing]

And you're welcome to visit the official Discord server. Many people there are discussing and sharing their settings, which might be helpful for you. 😁 Discord: discord.gg/CCBgHxJAdX

[@pabloaguilera4075]

MOZA should sell their own aluminum cockpit.

[@Zakky3]

great info champ,cheers

[@TheXelectrofreakx]

Pls Quide for Moza r16 with gs Wheel for raceroom pls

[@weeziinw8552]

fx 90 is a little bit much and why is there no guide for the r12 ?

[@skylar9196]

I tried these settings on my R12 and it feels way too strong, is this outdated now?

[@MOZARacing]

Hi, it's possible that the setup shown in the video might not suit everyone's preferences, as different players have varying requirements for game feel. Personalized parameter settings might be necessary to address your specific issue with clipping, especially in corners. For more detailed discussions on game parameter settings, we highly recommend joining our Discord community. There, you'll find some channels, including ones specifically dedicated to product and game parameter recommendations. In these channels, you should be able to find the advice and settings that best suit your needs. 🤩 discord.com/invite/CCBgHxJAdX

[@EinfachNils02]

AMS2 hat multiple big updates regarding physic, so yeah, it is different. but if it is to strong, just turn down gain ingame

[@huambo]

I cant get my MOZA to work in either Pcars 2 or AMS2. I cant even manually assign left and right turning.

[@MOZARacing]

Hi there! If you need any help, our after-sales team is always here for you. Just drop us a line at [e-mail] and we'll get back to you ASAP with the best possible solutions.

[@Very_Grumpy_Cat]

I have the same problem. I can not bind any of my controls in the game

[@ascottzander]

The game doesn't config for me, can someone help please?

[@MOZARacing]

While personal preferences for force feedback intensity can vary, we recommend joining our Discord user community where you'll find many enthusiastic members discussing and sharing their game settings daily. You can access our Discord server at discord.com/invite/CCBgHxJAdX. The community there is extremely helpful in dialing in the perfect vibration and force feedback levels for your preferences.

[@AlexDuclosmorin-qg5mi]

Tank you sir 👊🏻

[@steffendetrick]

I can’t get the game recognize the wheel. It recognize my9 23 but it will not recognize this wheel.

[@arnauvila338]

please show to config moza pit house and the game

[@D1-TriGGa]

Useless could have showed how you connected the R9 to the game.

[@steffendetrick]

Most of the stuff he showed you was stuff that was personal preferences anyways I also didn’t find it that helpful.

[@emabia72]

I have a GS steering wheel. Is there anybody who can give me a button mapping? Thanks

[@MOZARacing]

Thank you for your comment! If you're looking for button mapping for your GS steering wheel, we recommend joining our Discord community. There, you'll find a supportive community of players who share their own button configurations and provide guidance. Feel free to ask any questions you may have as well! 😊 discord.com/invite/CCBgHxJAdX

[@tigerbalm666]

Just setup my R5, it's so strong so not sure why peeps say it's weak! In AC, 60% is enough strength! A Real car is not even as strong....

[@JakubPuchalski]

Hi, I used your settings and my R9 is oscillating a lot. Changing the dumping settings either in Pit House or in the game does not help. Regardless if car speed is low or high, the wheel keeps vibrating and it puts it into aggressive oscillation if I take my hands of the wheel. It's tha same in both AMS2 and ACC. Is this normal?

[@MOZARacing]

Hi Jakub, you're welcome to visit the official Discord server. Many people there are discussing and sharing their settings, which might be helpful for you. 😁 Discord: discord.gg/CCBgHxJAdX

[@theodoreschultz4685]

Increase the wheel friction

[@MrFelixify]

no matter what. the game doesnt recognize my r12 wheel

[@cskaura]

And where is game settings? 🤦‍♂️

[@marcoturano7487]

damn

[@slappomatthew]

beamng setup please!!!!!!!!

[@8ending8ranches]

This game IS BOT SUPPORTED BY THIS GAME AND YOU CANT JUST "SET UP" YOUR CONTRILLS. for the love of god moza, configure this game in you dam app.

[@MadisonSquareGardendidJFK]

Thank You very much