2002 lexus gs430 with eaton m112 supercharger on it. stock injectors, fuel pump, ecm. spraying meth. injection to help with intake temps. and detonation. five psi. on stock 3.6 inch pulley.
Пікірлер: 129
@quique77646 жыл бұрын
I've decided that the LS or GS 430 will be my next build. Ty for the inspiration.
@sanjosonny25033 жыл бұрын
How has this build gone for you?
@sanjosonny25033 жыл бұрын
Let me know the route u are gonna take if u do the gs 430 build What kind of build u thinking?
@BickleBuice3 жыл бұрын
@@sanjosonny2503 I’m working on a GS430 build gonna take a long time though starting with suspension upgrades with coil overs swag bars and some just new stock suspension pieces to increase handling also going with LS400 big slotted brakes soon, getting a quantum auto tune naturally aspirated for now along with a either higher geared diff or LSD it’s straight piped already, planning to supercharge it probably in the next year aswell quantum auto has pretty much all the stuff you need I don’t suggest getting their full kit it’s way more expensive but it does have full instructions and everything but on their website you can priced together most of the kit besides the m112 super charger along with some pullys and fuel lines yourself, you can safely run about 5 pounds of boost for a extra 85 hp non intercooled which is the route I’m going but you can also get a intercooler setup and run boost til the engine blows and more is to come but that’s the basic plan I have for now the super charging part should total out to be around 3500 dollars if done myself which it will be and then other stuff will add up to a couple thousand aswell of course more will come and I’ll probably end up 10k deep in mods or somewhere around that figure
@sanjosonny25033 жыл бұрын
@@BickleBuice hell yea U got a Instagram or fb to follow on this?
@BickleBuice3 жыл бұрын
@@sanjosonny2503 not yet but I’ll keep you in mind and let you know if I make one
@MrBattlelac7 жыл бұрын
I'd venture to guess that you haven't ridden in a supercharged 3uz before. This car takes off like a rocket. Literally. I don't have to deal with turbo spool or choking in the top end. Yes, the gte offers beefy internals but I"m more than happy with my supercharged setup. To each their own.
@speedjunkie82354 жыл бұрын
MrBattlelac how much did it cost for everything?
@Jeremy_Hill_20204 жыл бұрын
Is that the 3UZ V8 used in other cars like the 2006 Lexus GS430, LS460, etc? cause my dad has a 2006 Lexus GS430 that I want to mod soon 👀
@Jeremy_Hill_20204 жыл бұрын
@@callister4941 I can still supercharge it anyway but would need modifications to make it fit? also would I be able to still use the semi automatic transmission? (since I can put it in into manual mode if I wanted to) I don't want to make crazy amounts of HP, since the 3UZ is rated at 300HP, I want to make at least 500HP but I still want to supercharge it anyway cause I like the whining sound (I still want to do some exhaust mods like long tube headers, magnaflow high flow cats, resonator delete, either super 10 muffler or series 40 delta flow muffler from flowmasters, & cams (I think there is a cammed 3UZ, I'm not sure)
@Jeremy_Hill_20204 жыл бұрын
@@callister4941 damn it
@kusohayai41143 жыл бұрын
@@Jeremy_Hill_2020 they actually made a tom’s supercharger kit that is now discontinued for the 3uz’s. It’s rather expensive since it’s rare, and you can only get them used. Really expensive though, but it was developed straight for the 430’s.
@MrBattlelac7 жыл бұрын
Yes, I had the valve body modified at IPT transmission in New Jersey. Big difference.
@user-gb1ne5jj8v5 жыл бұрын
It's so beautiful I wanna cry
@MrBattlelac8 жыл бұрын
Not sure what the 0-60 is I haven't measured it. Nor have I dyno'd it yet but I plan on doing so soon. And yes the video started off at drivers edge. I used to work there and I live across the street. Thanks for the kind words guys. Make sure to check my other videos of this car when I had the turbo on it.
@ray04827 жыл бұрын
MrBattlelac dude... Battleac you are #GSking man. did you have to set up a standalone ecu? seems impossible to tune the lexy. BRAVO brother ✊
@oceanwaves835 жыл бұрын
Update? What kind of numbers did it put down? 0-60? Boost?
@ethixhiggins50594 жыл бұрын
How has the trans held up
@michaelwoodsdale4608 жыл бұрын
This sorcery is fantastic - supercharged sedan!
@grantmarcus68373 жыл бұрын
i love the clock gauge. super cool.
@JuanTorres-ly1rq5 жыл бұрын
Bro please do a build process video theres plenty of us that need ur input. So clean so clean.
@MrBattlelac5 жыл бұрын
man this build is done and gone. i pushed that motor to the limit and blew the pistons apart. now its got a 2jzgte.
@lexusls5 жыл бұрын
MrBattlelac that stinks man, sorry to hear that. What PSI were you running when you lunched the bottom end? And did you ever get it on a dyno?
@UNDERFUNDEDGARAGE7 жыл бұрын
I really need this set up. Shit I need your help. lol
@ForwardMomentum5 жыл бұрын
Great build. Very unique. That IAT where the clock went is very creative. I wonder if this car is still out there?
@MrBattlelac5 жыл бұрын
thank you. yes one of a kind build. the supercharger manifold was literally made from scratch by me. i than moved onto a bullet cars manifold and ported supercharger. than blew the pistons apart. than went 2jz.
@ForwardMomentum5 жыл бұрын
MrBattlelac awesome! 2JZ FTW!
@MrBattlelac5 жыл бұрын
@@ForwardMomentum ya the 2jz gte with a 6262 single is nice. needs to be stroked to 3.4 though.
@ForwardMomentum5 жыл бұрын
MrBattlelac people keep asking me about 1uzfe power on my Channel and I keep telling people to just do the Aristo TT 2JZ swap and be done with it. LOL
@MrBattlelac5 жыл бұрын
@@ForwardMomentum well it boils down to preference. the 1uz is a good motor. especially if your not looking for more than probably 600 hp. theres alot of 1uz engines that are built and putting down alot of power. you get the benefit of more torque. its just more expensive because its a rarer engine to build up.
@idkdrew6 жыл бұрын
holy shit dude i live right behind that auto shop
@jray87046 жыл бұрын
Just got an 04 LS and super charge seems easier and more realizable for daily
@MrBattlelac7 жыл бұрын
its all custom. and get very expensive to do it right. but the results speak for themselves. see my other videos to see.
@jonathancarvajal49565 жыл бұрын
MrBattlelac how much did you spend on parts and labor ?
@Jeremy_Hill_20204 жыл бұрын
is it possible to use run that M112 supercharger (of course with fabrication) with the cold air intake but not anything else?
@callister49414 жыл бұрын
@@Jeremy_Hill_2020 Yes as long as it is low psi >5
@Jeremy_Hill_20204 жыл бұрын
@@callister4941 only 5 & below? (which should be good, I don't want to make crazy amounts of HP & want the stock internals to be safe (cause I also want to add cams, long tube headers, magnaflow high flow cats, resonator delete, & probably series 40 delta flow muffler instead of the super 10 mufflers (I want to make my dad's car sound loud & aggressive but not too loud) & get it tuned with 4-5 psi from the supercharger
@utagzmotoring Жыл бұрын
Did you purchase stock cloth to cover the A Pillar gauge housing?
@CTSV6.0-G375 жыл бұрын
a nice tune will do nicely
@MrBattlelac5 жыл бұрын
yes absolutely. but at the time it was all stock.
@MrBattlelac7 жыл бұрын
I had the valve body modified at IPT transmission in New Jersey.
@dansmith3378 Жыл бұрын
Man I'm in the bay area I own a 2001 gs 430 who or where can I buy the parts or shop to do this to my car your runs like a beast
@msarabia19978 жыл бұрын
now I want to do that on my 2001 gs430 lol. was it hard to set it up?
@Kanzenjdm5 жыл бұрын
Love the build man I got myself a 2003 Toyota celsior (ls430) from japan so far have ppe headers and straight pipe this will definitely be my next mod please reply if you still have this car or if you’d be willing to share some knowledge!
@therealboofighter5 жыл бұрын
Yeg Uc how did you like the headers? Are you in Edmonton?
@lionbass69274 жыл бұрын
Yeg Uc, can I get the link for the headers. I have a 2006 Lexus gs430
@fattiegrunt62313 жыл бұрын
Video was cool. How many pounds of boost?
@kevincarolina54914 жыл бұрын
What mods did you have to do to fit the supercharger? Or is it bolt on? Do you have any other way i could contsct you for more info? Im trying to do the same here
@ForPetesake5524 жыл бұрын
Very nice.
@bcbishop904 жыл бұрын
Was it tuned? Stock injectors, fuel pump but more air...?
@JuanTorres-ly1rq5 жыл бұрын
Well at least u enjoyed it!😫thanks.
@streetK44 жыл бұрын
What about engine tuning? You did that yourself? Reflash or piggy back
@HotForgeChaos8 жыл бұрын
What sort of engine management are you using? Looking to do something similar to my LS430 with probably a Kenne Bell or something
@luxysluck3 жыл бұрын
reliability over cool factor and stuff but I know you do miss this lol
@swordsmenbacon93473 жыл бұрын
Where did u get ur adapter for the supercharger and how much did u pay?
@AmanOU2be6 жыл бұрын
Did you ever throw a dragon in there or swap the pumpkin out for a better ratio? Also, check out the Apexi throttle controller.
@Elementaliti5 жыл бұрын
I expected a very different whine from the SC than what I heard.
@MrBattlelac5 жыл бұрын
it sounded pretty whiny when driving. what did you expect? i raced my buddies ctsv and it overwhelmed his exhaust when i was next to him. which i was.
@SenorDobbs7 жыл бұрын
Is this a custom setup or is there a kit out there?
@SoldogDev4 жыл бұрын
This is a full custom build, The only kit I found looking around was made by RMM (own a 05 gs430)
@dblockreal8 жыл бұрын
nice job man I got her old one 430 love the thing it's my second GS first one was the 300 lost it for circumstances rather not talk about but gotta 430 this time wouldn't mind doing what you did wanted to turbocharge a 300 but like I said I lost it this one came up Price is Right mileage was awesome condition was great got it would love to do what you did details please
@oligoyoutube3 жыл бұрын
you should reach out to quantum auto and get your ecu tuned now ;)
@MrBattlelac3 жыл бұрын
I haven’t had that supercharger for a few years now.
@pepebeiar42778 жыл бұрын
didn't an airbag used to go where you put the gauges?
@fabjonjon6 жыл бұрын
For a supercharger and going through all this trouble is the 100hp you gained really worth it? Gearing is long and shifts are slow, need more power. The gearing and sport mode in the newer one helps make a better driving experience. I would like to see the 8 speed in sport mode with this setup going through gears.
@MrBattlelac6 жыл бұрын
look at my other videos where i go smaller and smaller on the pulleys. nine psi is night and day. check em out.
@Emberdrake2123 жыл бұрын
Can I get a parts writeup? I have a GS430 with forged internals and I'd love to replicate this.
@بلوي818-ك9ز Жыл бұрын
How much horse power?
@emilianorlanda4 жыл бұрын
Are you located in Houston ?
@agentlongwood8 жыл бұрын
What kind of power are you getting at the wheels? And what is the cost on this set-up? It seems so rare to see a GS430 done up like this, I really like it. Not the usual "Just throw a 2JZ in it" that everyone else does.
@callister49412 жыл бұрын
lol this aged like milk. (it has a 2j now)
@nitronixus94023 жыл бұрын
how much horsepower you going on it bro? nice!
@mohamaditani4516 жыл бұрын
what are using for tuning the AFR ?? or are you just compensating with water meth ?
@MrBattlelac6 жыл бұрын
it has a ninth injector to richen the mixture.
@aznxfactor6 жыл бұрын
hey for the supercharger. i know you picked it up from a mustang but were there other parts you had to order to complete it?
@aznxfactor6 жыл бұрын
also are you running off the stock transmission?
@MrBattlelac6 жыл бұрын
the intake manifold for it had to be custom made.
@aznxfactor6 жыл бұрын
MrBattlelac anyway it can be made again? I was thinking about pulling the trigger on a gs400 or gs430. From what I read the 400 potentially has a stronger engine for output. I just want some extra boost not trying to make it a 9 second car. Super charger, valve body, lsd was what I'm thinking. Would appreciate if you knew where or how I can get it custom made. Sweet rig btw
@MrBattlelac6 жыл бұрын
i sold the original intake manifold i made to a guy in cali. i than bought the 2uz intake from bulletcars.com in australia but its made for a 4.7 liter toyota land cruiser. so i had to chop the top half off and weld on a top plate to make it fit under the hood. that manifold cost 1,300 us dollars and doesn't include the machining to remove the top half of it and weld on the new top plate the supercharger attaches too.
@aznxfactor6 жыл бұрын
Do you think going the manufactured route would be better? Carid.com sells an hks supercharger from 2500 going up. I'm in atx btw. :)
@HoodSwami4 жыл бұрын
How much does it put down?
@sekhon6o43 жыл бұрын
any other mods crucial to the supercharger, or can it be ran with stock internals and fuel systems ?
@Emberdrake2123 жыл бұрын
3uz rods are notoriously weak, upgrade those suckers
@عابر-ن8ع7 жыл бұрын
can meth be injected?
@2-day Жыл бұрын
What that cost you
@Owl23135 жыл бұрын
What did you have to do to get it to fit ?
@MrBattlelac5 жыл бұрын
get what to fit?
@Owl23135 жыл бұрын
@@MrBattlelac the supercharger, or was it plug and play
Ok there is a company called elate manufacturing that sells a bolt on supercharger manifold now. That uses the m112 supercharger. Hit them up.
@brgo_17872 жыл бұрын
Holy shit
@georgiepeorgie33158 жыл бұрын
0-60 about 4.5?
@joshuathompson30637 жыл бұрын
Did you have to do any trans work, when you were doing the charger setup?
@staticuzs16086 жыл бұрын
@@AmanOU2be i heard of people running around 450-500 no problem
@gsgs66734 жыл бұрын
Какой замер? 0-100 и квоттер???
@Jeremy_Hill_20205 жыл бұрын
I wish I can supercharge my dad's 06 GS430 but straight pipe it & cam it 😈
@kalebrodriguez44324 жыл бұрын
I have one. Is it possible To supercharge
@Jeremy_Hill_20204 жыл бұрын
@@kalebrodriguez4432 :0
@Jeremy_Hill_20204 жыл бұрын
@@kalebrodriguez4432 I didn't know a M112 supercharger can fit on the 4.3L 3UZ 👀 well, I don't want to straight pipe my dad's 06 GS430 but want to add long tube headers, magnaflow high flow cats, & series 40 delta flow flowmaster mufflers
@kingssuck064 жыл бұрын
@@Jeremy_Hill_2020 The 06 430 is a pretty rare car, only made that for 1 year.
@Jeremy_Hill_20204 жыл бұрын
@@kingssuck06 I guess my dad is lucky then
@zainadair36177 жыл бұрын
Why not go 2jz-gte I'm sure your trying to be different. But you could gotten more power from a 2J. More bang for your buck. Beautiful set up still.
@wesleytillotson15506 жыл бұрын
I guarantee you a 2jz would’ve been astronomically more expensive than this
@viuhn96216 жыл бұрын
what makes you think a 2j would be cheaper?
@viuhn96216 жыл бұрын
the uz is much cheaper, stronger and better sounding
@AmanOU2be6 жыл бұрын
Better sounding. Agreed.
@bikerboy2k1426 жыл бұрын
Everybody doesn't want a turbo charged engine. Like me im not a fan of turbo charged engines ill take a supercharger over turbo anyday. I have a 2002 gs3 and im bout to swap for an 4.3 v8 not gonna supercharge it tho but i just like the v8 power and sound. Great job on this car tho and im surprise the hood shut without a scoop.
@pepebeiar42778 жыл бұрын
+MrBattlelac
@figgy14135 жыл бұрын
You put a Ford super charger on a Japanese V8 ...... 🤮
@MrBattlelac5 жыл бұрын
so the hell what!!! its aluminum cast into the shape of a supercharger and it forces air into the engine. its the same principal trd used when they made superchargers for the 4.7 tundras. go throw up elsewhere. but thanks for watching. please subscribe. lol
@pepebeiar42778 жыл бұрын
sound is like a 4 cylinder honda lol
@mrvaj20216 жыл бұрын
pepe beiar someone don't know how a supercharger sounds like lmao
@logisticjuice41675 жыл бұрын
sounds like something that blow your fucking doors off