The Cuervo Racing Raptor 700 FCI intake Install Video 2006- 2021

Cuervo ATV Raptor 700 specialists
951-743-6328 [e-mail]
/ cuervoatv
www.ebay.com/usr/cuervoatv Cuervo ATV Raptor 700 specialists
951-743-6328 [e-mail]
/ cuervoatv
www.ebay.com/usr/cuervoatv

[@timpence825]

Thanks man for all you do for us riders. You take the time out of your day to teach and educate us on these machines.

[@yxiscatti]

I follow all your videos, I always learn things with them, so thank you very much one more time. It will be good to see the power gains with the +3 TB on the dyno :)

[@graysquirreltreeservice7299]

The monster shorty is on 🤗🙌🙌sooo loud I love ❤️ it .putting in airbox and controller now

[@Team2Gils]

Looks pretty straight forward.

[@BigHemiNJ]

This is such good timing for this video. I been holding off on ordering this because ive heard its a real pain in the ass. I emailed you about buying a tune for the PCV. Im just running no baffle right now on my 2021, but Im waiting on my full monster exhaust

[@Davido50]

Get a Pro Tec moflo airbox cover. Better than stock airbox cover & more air! Easy real 3-4hp w/better protection.

[@graysquirreltreeservice7299]

Getting my new raptor in a week 😁😁guess I better get to calling you 🤗see what I'm gonna do to this bad boy once she is broken in 👍🏻👍🏻

[@____MC____]

Is it possible for the filter to fit in the box without cutting a side off?

[@Flores97Drummin]

When doing the fci install this way and having the ais delete, are both of those holes capped?

[@Yurr7]

Does the KandN power stack air filter fit in the box

[@austins_edits9944]

I have a 740cc stroker with a 6mil crank on pump gas will It be safe use vp 110 or mr12?

[@danielleyva2307]

hey cuervo what could you use as a replacement for a straight fitted fuel customs didnt send me one

[@jovanygarcia2473]

My 2020 is stock. I got the big 3 and AIS delete. Should i do the ais deep first or wait till im done

[@michaelsamuel5282]

blessings,my 2016 blew up during a low rpm burn out, it had a big gun fuel control, no exhaust mod, all stock, what is wrong there...???

[@dotdot2009]

Does the 2008 model have a hose coming from the throttle body?

[@bronkylane]

You are using a bar fitting that’s doesn’t come with. What can I use it instead for the lower hose that goes to the intake

[@brycehorton3845]

Do you have any idea where I can buy more hose ? Of course like an idiot when I did my AIS delete I threw that tubing away.

[@marknato5569]

My fci keeps disconnecting from the throttle body no matter how hard I tighten it down. Any tips or tricks to prevent it from falling off

[@MeeN905]

Thank you for this video, i just did my big 3 and i am looking at more mods, would you recommend a 50mm throttle body to go with the FCI intake?

[@xxthewolfxx]

The FCI intake tube will not fit on the 50mm TB..you’ll most likely need to run a velocity..and in that case if you wanted to run a airbox, you would use the FCI airbox and filter with the velocity tube..I believe Daniel and Cuervo Racing can hook you up with the goods which ever way you go.

[@xxthewolfxx]

50mm TB is a bit much without head work, but some people gotta take it one mod at a time, it gets expensive after the big 3.

[@MrCuervoRacing]

Recommend to bore oem throttle body to 47mm . Factory fitment and no low end losses

[@dakotaknight676]

I just got my fci intake for my 2021 raptor 700r, and I’m learning a lot but I was wondering if you have to do a AIS delete in order to install the intake or can I just run my AIS to my fuel customs intake like the factory one?? And if so what’s the difference if I do or if I don’t? Any info will be a big help!

[@AndresPerez-gf9ur]

Hey Dakota did u end up deleting your ais in order to install your fci? Or did u did it like in the stock one?

[@AndresPerez-gf9ur]

The 3 hoses

[@drwinlied]

What are the wheel/tire combo on that raptor? I want a setup to run at my local drag strip and the more I dig into "street" tires I realize many of them are not rated for very high speeds...like not even 70.

[@MrCuervoRacing]

Those are Duro Top fighters 21x10x10. They are heavy. I use them for the dyno

[@rooster4609]

hey Mr. Cuervo just got my raptor back not to long ago from some dudes that stole it and was wondering if I need to order a new wiring harness since they cut my wires to start quad and maybe just retap the wires back together??? TIA

[@MrCuervoRacing]

Depends on where they cut it. Send some pics to [e-mail]

[@augielugo7747]

Hey Mr Cuervo I have a 2021 700r SE CA Model. Are there any nerf bars that fit with CA C.A.R.B. add on. Or is there a way to remove the whole system so that any set of nerf bars fit??

[@MrCuervoRacing]

Should be easy to relocate or move it. I would buybthe nerf bars u like and mod the mounting or remore as needed

[@mrincredible2330]

Why not use the ecu bracket that’s been supplied? Vibrant issues?

[@MrCuervoRacing]

To me its easier to cut the oem box and use the oem hardware

[@AndresPerez-gf9ur]

What if im not deleting the ais would i still be able to follow the same thing u did? Please help

[@arthurkarnafel6443]

What did you end up doing

[@austins_edits9944]

Do you need to unplug the ais vavle?

[@MrCuervoRacing]

No

[@poorwhiteboy6521]

Do you have the kit in stock ? Or need to wait for order

[@MrCuervoRacing]

Yes in stock currently

[@poorwhiteboy6521]

@@MrCuervoRacing do you think cutting a bigger hole in the stock air box. And putting the fci kit with it might work ? Seems like it would be close to fit

[@poorwhiteboy6521]

Price currently ?

[@yxiscatti]

@@poorwhiteboy6521 I remember I saw someone did it, and it fits pretty good, you just need to make some kind of front shield where the intake meets the stock air box.

[@MrChopper505]

How much for this intake? I have the 2017

[@Davido50]

Cricket's.....

[@RevZoneSafari]

200$ without box 300 with box

[@Davido50]

Whats the pt of an unreliable 60hp Raptor 700R? Ridiculous.