KENWOOD speaker system restoration // The best restoration you've ever seen

[@keytrackmusicreviews]

Painting surfaces nobody will ever see... that's dedication and care. Love your videos!

[@RestorationVideo]

*_I love the amount of love and dedication you show on these restorations!_*

[@TheMazo02]

:D are you serious?

[@АлексСкляр-й2з]

Чем он заливает диффузор , чтобы растворить клей?

[@TheMazo02]

@@АлексСкляр-й2з разбавитель или толуол

[@pejtepivo]

@@АлексСкляр-й2зацетон

[@zaharmedved4804]

​@@АлексСкляр-й2зацетон

[@splender88]

Amazing job of restoring these speakers. It just goes to show anything can be brought back with some talent and hard work. These speakers are probably better than they were new now!

[@TheJTcreate]

Well first of all these speakers were cheap when they first came out. I know because I’ve rebuilt them quite a few times They’re not worth this extreme effort. A basic fix is about all they are worth. Gold paint doesn’t make things sound better. Second, the rebuild of the drivers was wrong. They didn’t shim the coils to assure true alignment. The Re-edging of the woofer doesn’t take two people. As long as the coil Was in good shape, it wasn’t worth the time and cost to remove the cone assemble and paint. There is a good chance these speakers will Distort as soon as they are blasted. Finally, was an AB test done to assure the speakers match? You do have components in that crossover that can go bad. So An AB test is mandatory. the job looks nice and clean, I’ll give them credit for that. but I have to be blunt. They basically polished a turd. Now maybe in that area of the world, those Speakers are a win, but new, they were cheap shelf pieces at your local circuit city.

[@Andreas_Straub]

@@TheJTcreate what crossover? Didn't see any ....

[@ThatOneGamedev.-pi8or]

​@@Andreas_Straub same... Feel like bros faking ngl

[@markdos1538]

Hermoso trabajo de restauración. nuevamente Kenwood. Felicidades. 👍👍🇨🇱 Beautiful restoration job. Kenwood again. Congratulations. 👍👍🇨🇱

[@BoomBoxHolic]

You guys have mad DIY Skills. Very smooth restoration.

[@emiliomartins9152]

Nice work, love the effort you guys put into these restorations, keep up the good work. 🍻

[@Jammerk40]

What a beautiful Restoration! They look like you just bought them! You bought them back to the original they were in the 70's or 80's I don't know what Era they were!

[@badrinair]

you some seriously level of good skills. I remember my neighbour who was an expat from Baharin bring back speakers like these in the early 90's. I used to watch it work with such fascination.

[@junpantilano1]

Nice job. I was just wondering why you didn't use shims in centering the voice coils. You just relied on the spider ang cone suspension alignment.

[@TheMazo02]

because it is not serious.. he also left glue in the gap at 18:32...

[@saqibsami2783]

I was also thinking about this, centering is necessary otherwise voice coil strikes with magnet pole.

[@MarvinHartmann452]

​@TheMazo02 It looks like "system in box" speakers to me and they're certainly not worth restoring. Maybe if you live in some place where there's no better options, but even then, it just doesn't worth it. These speakers are garbage. Restored or not.

[@TheMazo02]

@@MarvinHartmann452 not sure which country is it.. maybe it is worth there.. but when restoring, at least do it right.. well, I have seen better restorations lol

[@andikuswanto5564]

​@@TheMazo02😊😊

[@PedroPaulo-eu2jq]

Parabéns... nessa semana almocei em um restaurante e vi duas caixas dessas tocando... + de 40 anos depois. Som limpo e nítido. Era meu sonho de consumo

[@IRSO76]

As que você ouviu não devem ter sido reconeadas como essas.

[@ginezisochi]

как этот ширпотреб может играть хорошо это не колонки это полное извиняюсь Г....

[@PurpleDreki]

Outstanding restoration of a classic speaker! Wow!

[@TheMazo02]

you must be blind

[@PurpleDreki]

@@TheMazo02 and people like you shouldn't make comments.

[@marcelomayorga9177]

Increíble!!!! No usa centrador en ningún parlante!!!!! Será Kenwood???? El parlante de medios va en el mismo compartimiento que el woofer sin aislar?????

[@deckers222]

la otra pregunta es en cuanto ha quedado la impedancia, y como ha configurado el crossover

[@josephramsern4968]

Hi all subscribers and friends, absolutely brilliant workmanship. The attention to detail is second to none. Your passion is inspiring gents, keep up the great work and content. Much Luv & Respect from South Africa 👌👍🙏🙏🙏

[@127Foxtrot]

That is one new lease of life, wonderful work !

[@Ulisses5978]

Cara, que saudades destes equipamentos de som das décadas oitenta e noventa. Tinham potência, qualidade e eram lindos. Parabéns, belo trabalho.

[@baldbearded349]

I watch all your videos, they are very relaxing... Without a doubt this was your best restoration.

[@taufik-hsb]

Keren speakernya... nostalgia jaman dulu

[@خالدالبيومي-ظ1ز]

Beautiful restoration indeed! Thank you 🙏🏼

[@jeevespreston]

Phenomenal craftsmanship, well done!!!

[@СергейСорокин-ш4п]

Любой динамик перед заклейкой подвеса - ли шайбы ли обязательно Центруется! Это истина!

[@SoundManStudios]

im tempted to send them my old 90s studio speakers lol looks like they do good work.

[@eduardoxavier9308]

Um trabalho de excelência. Congratulations!

[@lbudt29]

Beautiful rebuild gentlemen, stunning with the grills on too.

[@geertvanbergen3905]

The most satisfying video I’ve seen in a long time

[@fhwolthuis]

Beautiful speakers, well done guys!

[@zaharmedved4804]

После такого ремонтного Это уже говно Просто ты ничего не понимаешь в акустике и в динамиках

[@Xantylon74]

@@zaharmedved4804 Those speakers weren't that good in the first place.

[@Joe-hk4pv]

I’m just really impressed with these guys work. It’s like they’ve done it a million times

[@toddlee2571]

Safe to say you put way more effort and money into these than the original manufacturer did.

[@mrdali67]

Indeed .. most of these old 70's speakers with mostly paper cone speakers (and lots off'em) is pure junk, but they might actually turn out to sound better than the original when reconed with better materials. And I gotta say even many of these videos look like some phillipine street workers, they actually look quite skilled at what they do and often the results look quite professional

[@tyl812]

They sounded awful new.

[@ghostsniper2099]

You don't really know much about this stuff, and it shows.

[@toddlee2571]

@ghostsniper2099 I've built plenty of DIY speakers. You saw the video. What kind of crossovers were in those speakers? What have you built?

[@tombarlow6176]

Brilliant restoration of speakers 🎉🎉

[@robertjefferson8275]

Dude...he made these old Kenwoods look pretty friggin good! ❤

[@Daniel-d2o5h]

Factory quality work, nice job fellas!!!

[@themadmallard]

Gotta love that 80s all-in-one stack system speaker design...

[@christophmeirich5928]

Chapeau 🎩 🎩 🎩 🎩 🎩 Well done !!!! Greetings from germany Christoph 👏 👏 👏 👏 👏

[@ДамирАхтямов-т6э]

masters from God! This is simply amazing work!!!!

[@6980mikey]

Me dieron ganas de ayudarlos, que buena restauracion los felicito🎉🎉🎉🎉🎉

[@waltermartinezthomaz921]

Fantastico!!... parabens pelo excelente trabalho

[@VonBluesman]

Amazing craftsmanship, great restoration job. 👏👍😎✌️

[@amelitolopez7820]

Wow very nice restoration group.❤❤❤❤❤❤

[@parthabhatta1963]

Excellent restoration. Loved the work.👍👍👍

[@AzhwynMetalRockLoverss]

Wow.Looks Brand New Made By KENWOOD.Amazing. Good Eork Guyz. Keep It Up.

[@МистерТрололо-ж9й]

Динамик не клеится без центровки, вся работа на ветер

[@СергейИванов-м5р2ю]

А кроссоверы ????? кто , что менял ???? Залипуха.....жаль было поставить ламинат....пошли , по дешевке...

[@joaobatistaalmeida8389]

FICARAM MARAVILHOSAS. PARABÉNS PELO TRABALHO.

[@antoniovictor2049]

totrlnlorvtre

[@rogerioale767]

Ele não fez centralização em nenhum alto-falante!

[@judyrosy]

Thank you for saving those speakers...

[@daveg4525]

How come you did not put a crossover in them. I had a pair the highs was a little to bright, the person I sold them to put crossovers in them and they sounded almost perfect.

[@HaroldAlexis-bb8sd]

Excellent work in refurbishing & restoration rebuild. 👍⭐⭐⭐⭐⭐

[@rohitkitturkar8847]

Always wait for your video..❤

[@user-yokohama-nakaku]

このスピーカーは、海外向けのKenwood　speaker　でしょうか？初めて拝見いたしました。良く修理なさり、復元させました。あなたのテクニックに脱帽いたします。お見事です。素晴らしい～

[@vasilisarris6717]

Your best work yet. They look like they just came out of the factory.👍🏽👍🏽👍🏽👍🏽👍🏽

[@tstemen1047]

This was insane. These guys should move here. So many people have old school speakers and need them rebuilt. Way cool.

[@noureddineelaroussi7680]

The sound is coming out of my B&W speakers, so I can't tell, but this is definitely the best restoration on KZbin ever!

[@АнатолийРомазанов-б3и]

Большой труд. И неплохая работа.

[@ИванычМо-к6й]

в 80-е мы этим каждый день занимались. Уровень - восьмиклассник.

[@МышьОстрозубая]

Отстой. Никакой центровки. Покрасить и выбросить

[@JoseMaria-zk1vq]

😍😍...Hermosa restauración, felicidades la verdad impecable. 👏👏👏👏👏

[@gerardobustos3389]

Increíble, saludos desde CHILE, cuidece

[@peteralvarez3039]

the external cabinet and the speakers restoration is superb. however, the wires are the same and the crossover caps, etc were not changed. i wonder about the sound and the freq response would be.

[@phanominon]

I didn't even see any crossovers or caps? All I saw was a pigtail of wires.

[@Erelio]

Where we’re going we don’t need no stinken crossovers

[@curelaruvalentin7520]

Nice nice very nice...but without crossover...

[@TheMazo02]

@@Cornholio you probably didn't notice how he left glue in magnetic gap

[@rajeevpandey6379]

It is done by artists and not technicians, Marvellous job,

[@jozsefmihaly9381]

Gratulálok, nagyon szép munka!!👍

[@linus031961]

Great work. A little question, what do you use for melting the glue ?

[@chhetritech5529]

Thiner

[@billyfong2352]

For restoring the body of the speaker , what is the black filler you use

[@hernandovillamarinbuenaven7476]

Acetone or paint thinner, among others..

[@pcorf]

Great restoration of the original existing enclosures.

[@rodrigoulianadesouza1689]

Perfeito, fantástico show.

[@alaingiroux3544]

Merveilleux travail !!!

[@Willem59]

Awesome restoration 👍

[@viniciusicandido8785]

Muito talentosos na restauração. Parabéns.

[@carlosalbertopiran9793]

Sorry man For wot working in the flor. please in the tablet is mor profesional.you are Best profesional.i like your working.crongratulation.😀👍👌🛠️good day For You.

[@ИгорьКоротков-щ6ж]

Для таких размеров очень тонкие стенки, особенно передняя панель. У меня самодельные, передняя панель 3 см.

[@Mr_Flybacker]

Аналогично, да что вы хотели от дешёвых колонок? То, что это дешёвое гавно - понятно было сразу, как достали басовики, на которых пипирошные магнитики. В этих рисовых корпусах я даже нормальных фильтров не увидал кстати.

[@Andrew-gw5pz]

Как они динамики "отремонтировали", я мягко говоря охерел😂По-моему это просто мебельщики хернёй страдали.

[@ВалерийПавлович-ю1е]

@@Mr_Flybacker там фильтры поместились на клемной колодке. нанотехнологии вашу мать.

[@richarddavis1416]

Very relaxing videos… great job

[@volkiruski1221]

What a respect I have for you. How you do it, how you made these "oldies" working and see so well again. I cannot. Greetz from the Netherlands! (The land of Philips😄).

[@ArtDeth]

Why no shims on the small speaker coils? Did anyone vacuum out the inards? I do like the tape masking that was done to the speaker bodies, nice! They look very nice, hope your sanding area and new skinning/paint areas are separated.

[@chinmeysway]

Laquor thinner or acetone is a guess

[@ArtDeth]

@@chinmeysway Doesn't answer any of my questions Chinmeysway

[@yollardayiz]

HARİKA BİR ÇALIŞMA İZLEMESİDE TAM BİR TERAPİ

[@patty-ow9ul]

Looks great and i enjoyed watching it.

[@davidkastin4240]

They look excellent 👍 I have a pair of these Kenwood speakers but a different model about 36 yrs. They look decent and still sound great.

[@tagalogilangilang6132]

i remember when I was in middle east working as ofw, i bought Kenwood speakers almost same as that,,,,that was yr 2001 sounds great,,,,,

[@gamingthon2118]

Mấy bác làm tỉ mỉ chi tiết ghê

[@sergioarjonagallego1353]

Que líquido usa para despegar los altavoces y membranas tan fácilmente?

[@brankomilosev2400]

Bravo super you are hifi doctors.

[@S7EVE_P]

I build custom speakers and enclosures and I think you did a very nice job, thanks for sharing👍👍

[@66doodz]

Fun to watch. One recommendation while they are apart is glue the corner and throw a small brace. Also spray sound deadening on the backs of all the drivers takes the ring out of them.

[@clevermusicbox3630]

What solvent do you use to dissolve the glue?

[@BlueSkinedCrackBaby]

I’m trying to figure this out as well. If I find out I’ll post it here.

[@STRANGE_hour]

Bleach

[@BlueSkinedCrackBaby]

@@STRANGE_hour Thank You 🙏🏻

[@gianlucavessio3562]

Incredible artisans : love your videos! 😍😍

[@cladaflorestasystemaudio3334]

Wow you guys are awesome huh 👏👌😍

[@geoffdaykin250]

That was amazing to watch.

[@vivekrock1032]

Mind blowing 🤯 😳

[@flaviotranquilli1424]

Very, very good...!!! Show!!!!👏👏👏

[@josegallardos4265]

That's Team work!!!

[@JürgenStark-w8j]

Wow Wow nice work

[@rajugupta-chaudhary6467]

Beautiful work.

[@1972genoa]

Come si dice....stucco e pittura fan bella figura !! Niente di più che un esercizio pubblicitario dal valore dubbio

[@ReginaldDj1]

This was beautiful work ❤

[@rodrigo9484]

Muito top seu trabalho 👏👏

[@Idelia412]

Ama,ing restoration. I had Pioneer 99's when I got them in Japan when I was stationed there. Guess they would have been worth restoring.

[@tonydussap9760]

Super travail bien fait tout à la mains restorer c'est bein et pas chère ❤

[@AudioElectronicsChicago]

Excellent

[@krystianpiet3162]

Beauty❤

[@jorgearmandosaavedracastro1745]

Hermosos altavoces vintage

[@cattythecat9161]

waoo.,.. better than new, i would say...

[@djronyaudopedra9415]

rapaz cachorro da hora excelente pelo seu trabalho falando francamente aqui tá fazendo frio aí onde você mora faz frio também

[@tomcede6428]

He makes it look so very easy.

[@ONeCycle-j6w]

Nice bro I am new here to your shop🎉🎉🎉🎉

[@ildefonsobenitez6624]

Stunning !!!

[@garystinson1060]

Great work!!😎

[@jackjackie3152]

great job.respect.

[@deanekonomou7641]

Great video . No cross over rebuild?