Intercooler Resonator Delete + Turbosmart Billet Plug Install | 2018 - 2021 Accord 2.0

In this video we remove the factory intercooler resonator and replace it with a turbosmart billet plug. The modification is suppose to improve the turbo spool, acceleration and improve turbo sounds. Find out for yourself if this video proves that to be right!
Shout out to Joel Felix for being the first to do this mod. Go check out his channel, subscribe and check out his build.
/ srt4rida
Don’t forgot that Fahrenheit Motorsports has paired with Crux Motorsports to save you 20% on your purchases using the code: FAHRENHEIT
Want a turbosmart billet plug of your own?
www.kseriesparts.com/TS-0205-...

[@copdwarriormcdonald7968]

you doing great coverage of the Honda! Bravo

[@MrWalker122]

Thanks for the video! Will be doing this next weekend

[@jolivas1437]

Can’t wait to see that custom piping that deletes the resonator system all together. Would definitely like to get that.

[@dennisarroyo3039]

Im doing this on sunday, also I’ll install my AEM intake. Thanks for the video, I will probably watch it will I do the mod, very helpful.

[@Fahrenheit_Motorsports]

It’s easy man!

[@DhrumilP24]

Dude the sound is going to be insane

[@brandonpatel9836]

Does she still have powertain warranty? And super sweet Chanel bro you do good work! Just got one and curious gonna start nodding her up 🙏💪🏻💪🏻 keep up good work bro

[@modakaification]

Any difference in power? Or this for just hearing more of the turbo n wastegate noise? Just curious cause I have mines coming in next week for my 2.0t

[@eZStaR1]

Hey buddy I had a few questions. 1. What is that PRL pipe going to the mishimoto intake? Do you have this pipe because you have a type R turbo or something? 2. When you were unscrewing all these bolts, what is the torque # it needs to be set at. Lastly, what is the golden stuff on the intake itself?

[@h2batavia922]

Thank you for the vid. Q:: I want to do on mine., so Could the 25mm work ? Since it’s not being *Capped off. I mean it *Plugs into a clampdown hose with what I think has a bit of a give on the tightening diameter. I could be wrong though. Any thought?

[@artkillary1]

Any long term issues that it could cause damage to the turbo system or engine?

[@sifugab]

I never heard of anyone doing this mod yet, good stuff man! You think this is the same process with the 1.5t?

[@Jacob2.0t]

Sifu Gab can confirm it is the same process. However you ARE able to get it through the engine bay!

[@sifugab]

@@Jacob2.0t Thanks man, did you do this to your 1.5? Or a buddies?

[@stancemakesherdance8804]

Question bro I did wat you did & I test drive the car & it feels like it wants to bog out when I step on it to 0-60

[@jeffgaston5205]

I put my turbo smart plug in my 2.0 without taking out the intercooler and I just separated the connection and plugged it, but I feel there is a lag before the turbo kicks in, do you know why

[@kelderman295]

..But if you do... 🤣🤣 good video as always.

[@Fahrenheit_Motorsports]

😂😂

[@silcas1882]

So, PRL inlet fits with Mishimoto intake?

[@tigrechapin335]

Hey what I did trow hks blow valve on the hole

[@Iegend17]

What’s happened to ur engine cover bro ?

[@Babyjokers2.0t]

2 questions. Does removing that resonator affect the car in any negative way if it's completely stock? Also what 0-60 times do you currently get with all the mods done

[@Fahrenheit_Motorsports]

No negative effects that I felt or have seen so far. 0-60 times I’ll need to get back to you on.

[@07Knightfall]

Who are you getting the polished aluminum intercooler pipes from? Where can we order them?

[@oubobcats27]

Is this possible without removing the wheel?

[@bolivargeraldo1103]

Hi What is the brand and side of the wheels that your car have it on

[@aaronburnette4585]

Help! Can anybody tell me what size (mm) I would need for a 1.5l?

[@jygogaming3550]

Any different after removing it?

[@dicha-ni8ig]

Just as an FYI...the 2020 accord sport resonator is round and directly underneath that turbo rubber tube that's under the intake...and you can do everything from above/top...hope that helps other with 2020+ accords 👍

[@Fahrenheit_Motorsports]

Are you talking about the intake resonator? There is also a intercooler resonator which this video was about.

[@dicha-ni8ig]

@@Fahrenheit_Motorsports Was actually a question..lol...I was also referring to the 1.5T...

[@daniejw]

Since the resonator had to come out through the bottom. Did you really need to disconnect the intercooler piping below the air box?

[@armandowar88]

No

[@andrewwitter7038]

Did u get an engine light ?

[@paulstpierre856]

Hey man. Was wondering if a 34mm blanking plug would fit or be to tight?

[@modakaification]

There was another channel that some guy did one with a 34mm plug it looks snug on there but all and all works great, I have my 34mm plug coming in next week it should fit fine.

[@docmeth2112]

Are you planning on going with the type r turbo in the future?

[@Fahrenheit_Motorsports]

Yes sir! I have the turbo in the garage. Just need to swap it out.

[@iliketakingshowers]

What size is the plug? Wondering if I can use a pipe plug instead

[@tc3sean]

You can use 3/4" PVC pipe plug, less than 2$ at homedepot. I did this "mod" after installing my K&N typhoon intake on my 2L.

[@iliketakingshowers]

@@tc3sean thanks!

[@The_Dizz]

Was this filmed in Las Cruses?

[@zombietodd69]

Where do you find most of your music? Its never bad

[@Fahrenheit_Motorsports]

KZbin provides free music. I typically download from them because it’s royalty free. 👍🏽

[@danielhan3098]

Was the PRL hose easy to connect with the mishimoto intake?

[@Fahrenheit_Motorsports]

Super easy. It was a tight fit but I used a little bit of wd-40 as lube to get the maf connector on the PRL.

[@spencerhanson1710]

What company coming out with charge pipes

[@Fahrenheit_Motorsports]

It’s a performance shop. VI Engineering is making 30 sets using Joel Felix as the test car.

[@Hoodz11590]

Just did this to my 6spd 19' accord 2.0t n I hear no diffrence. My intake gave me more sound then this mod. Ill prob drive it for a couple of days to see if anything if not then ill take it out

[@Fahrenheit_Motorsports]

It’s not so much for sound, it’s more about the air volume increase. So better throttle response.

[@nathanielporter5765]

Is a resonator and muffler delete on the exhaust bad or good?

[@xgnofearzthe10thgenlegend82]

Nathaniel Porter it’s a preference of sound if you ask me.. I ran it for a while with three inch pipes, prl down pipe and front pipe. Loud as hell with nice crackles and pops. But my car isn’t stock. I put a resonator(nothing too restrictive) And two ultra quiet mufflers and it’s still super loud. Except it’s only loud when I’m slamming the gas. When car is just idle or cruising it’s just a deep hum. I love it...... it still feels like a daily driver but performs like a race car still.

[@Fahrenheit_Motorsports]

Yeah I agree with Paul. I took off the mufflers and left the stock resonators and it’s still quite. I also didn’t want it full blow straight pipe cause I drive my daughter around a lot. Start with removing mufflers and go from there. The turbo quiets down the system a lot.

[@chawkins6789]

For some reason mine seems quieter after this.

[@nathanielporter5765]

do I need to tune my car first before i do this

[@Accordriven]

Why the auto over stick?

[@Fahrenheit_Motorsports]

I work in Real Estate so I’m always on my phone, texting, emailing, calling, etc so I wanted to take the stick out of the equation. The 10sp is pretty bad tho. It’s not a typical auto car, it’s faster then the 6 sp and it’s acceleration is nuts with the gearing. The fast 10th gen accord and world record is a 10AT.

[@nc2698]

Sounds the same, maybe just get a new exhaust to get the sound and performance your looking for?

[@Fahrenheit_Motorsports]

I ordered piping so I could fab something up.

[@henrynissanmimintruck]

Bro you need a new air filter 🤙

[@Fahrenheit_Motorsports]

It needs to be cleaned for sure.

[@JoseSuaveAuto]

Still waiting for mines to come in, ordering from Amazon was a bad mistake. Should of went to kseriesparts.com

[@Fahrenheit_Motorsports]

It’s quick bro. Remove intake, pop the fender lining in drivers side. Take out 4 bolts. Remove 3 screws holding in metal skid plate, Slide out of bottom. End of video. Lol

[@Fahrenheit_Motorsports]

Car definitely sounds louder today without 25 mph winds.

[@JoseSuaveAuto]

@@Fahrenheit_Motorsports those winds came to mass lol but I can't wait

[@xgnofearzthe10thgenlegend82]

Fahrenheit Motorsports the damn thing is out of stock! I was hoping to do my intercooler upgrade at this mod at the same time. Anyone else have this part? If so, who do you recommend?

[@rjmendiola2661]

very cheap mod.. nice video...