Chinese Diesel Heaters Glow Plug & Atomizing Screen

  Рет қаралды 39,349

Mark Davies

Mark Davies

Күн бұрын

Пікірлер: 68
@paulhughes4434
@paulhughes4434 Жыл бұрын
To who ever is having smoke no start issues ,The gauze screen atomiser has to be pushed in as far as it will go so it doesn’t constrict the small hole to the side that is what is causing the smoke no start issue, also use a bit of redex diesel treatment per tank fill will help. Also dont over prime these heaters as they flood .Great idea in vid using a concrete screw to remove atomiser screen 👍👍
@waynejill
@waynejill 7 ай бұрын
Thanks Mark for a very detailed explanation. I just replaced my neighbours glow plug & your video made it easy 👍
@curtdunlap6818
@curtdunlap6818 23 күн бұрын
At the beginning of this 2024 heating season, my heater was smoking and not really running right until it finally started shutting down and restarting on me. I took it apart and cleaned the buildup of chunks and soot and brushed and flushed everything followed by compressed air to blow out the air channels, and then reassembled. After all of that, it was still not running right. In a moment of desperation, I pulled the intake hose off and while the heater was running, tried giving it a bit of compressed air, thinking it was running rich. My nozzle button "slipped", and the heater got a short burst at 120psi! Soot blew out of every loose crevasse and out the exhaust! I tried to do it again, but the air nozzle button slipped again and it got another burst! What I noticed after that astonished me. The operating temperature rose from the dismal 179C to about 205C. One more burst, and it's been running at 215C, and now the only smoke I see is a white smoke on cold days with with no smell to it at all. I don't know why the cleaning didn't fix it, but I'm happy with it now. After that ordeal, I bought the whole compliment of replacement parts including the diffuser screen! I'll be ready next time! Thanks for the video!
@Марк.Фетнов
@Марк.Фетнов 2 жыл бұрын
Oven cleaner is great for cleaning out the burn chambers, strip it down then spray inside both halves liberally! After 5 mins soaking, give them a scrub with an old paint brush then wash out with a hose (water). Mine was blowing white smoke and wouldn't start, now it runs like new 👍
@Trynfixit
@Trynfixit 3 жыл бұрын
You helped me out today !😂 I bought my diesel heater today .Got error code E 03 ..I was like what was the name of that english bloke that cut a box spanner to take out the plug ! I had watched that video ages ago ! Found you anyway Mark! My glow plug was cracked into Sh#te! Thanks from across the pond ☘☘☘subscribed 👍
@earthssecretenergy2371
@earthssecretenergy2371 Жыл бұрын
Same thing happened to me ! Hears what i did and it worked... I did the same take out the screen then i cleaned the plug, then i cleaned the inside of the whole were the screen goes back. i used a screw and wrapped napkin around the screw then gently turned it around. I had did this many times to clean the HOLE TILL I WAS SATISFIED. Don't forget to clean where the diesel squirts in, i had used the screw to scrape around that spot. C;lean as best you can , one last thing be careful when trying to remove the screen. I believe this happens more often when running on low , that's ok just remember to fire it up once in a while on high heat for around 30 minutes every other week.
@mickgatz214
@mickgatz214 11 ай бұрын
Thanx for the short precise video, Mark., 👍 Still new to this, but they are cheap and a nice bit of kit!
@MrMeltedwellies
@MrMeltedwellies 11 ай бұрын
Glad it was helpful thanks for watching
@dudeleboski2692
@dudeleboski2692 Ай бұрын
Brake cleaner, I’ve found works wonders
@MrMeltedwellies
@MrMeltedwellies 29 күн бұрын
Cheers thanks for info
@dudeleboski2692
@dudeleboski2692 26 күн бұрын
Just be careful to allow the BC to evaporate 1st! BOOM!
@geoff2373
@geoff2373 11 ай бұрын
Hi Mark your night heater is burning fuel that built up in the chamber leave it on hi setting for a bit to burn it out and it will be fine .
@victorjcano
@victorjcano Жыл бұрын
what is the resistance in ohms of a good plug?
@frederick6008
@frederick6008 7 ай бұрын
The guy David McLucky, i think, recomends starting your heater every month when not in use and running it on high. Been a few years, no problems yet!
@kentkurt9065
@kentkurt9065 Жыл бұрын
I rebuilt mine got a new screen . Saw that the the atomiser was I thought cheaply made it was spot welded together . Pulled out the old atomiser ,and broke it the old atomiser was also clean . But I had to use new atomiser . It didn't work ! I also threw in a new glow plug still didn't didn't work . Got it to smoke a lot . Checking into different atomiser . I'm thinking the spot weld restricted the screen too much . Let me know what you found
@johnvanberrgem286
@johnvanberrgem286 2 жыл бұрын
Check the little hole above the atomiser screen.
@coachgeo
@coachgeo 2 жыл бұрын
tell me more about this hole? how big/small? is that the hole that introduces fuel?
@grahamfrear9270
@grahamfrear9270 Жыл бұрын
Where's this little hole
@mtxkid211
@mtxkid211 Жыл бұрын
@@coachgeothe hole is on the part where the glow plug threads in, on the side where the fuel goes in right next to it and right after where the threads stop not sure what the purpose of that hole is but easy to clean!
@mtxkid211
@mtxkid211 Жыл бұрын
@@grahamfrear9270 the hole is on the part where the glow plug threads in on the side where the fuel goes in right next to it and right after where the threads stop not sure what the purpose of that hole is but easy to clean!
@alexkalsatos5555
@alexkalsatos5555 3 жыл бұрын
Thanks for the video is very helpfull. My question looking at the glow plug is that heater a 2kw or a 5kw. I just replaced my glow plug exact same after 3.5 winters working every day heating a 30ft bus conversion at times -20C + in Toronto very happy with it.
@deiannikolov7987
@deiannikolov7987 2 жыл бұрын
Did you ever open and clean it in side from the carbon build. I have used my for 2 years haven't done any service yet
@mark-rs1cl
@mark-rs1cl 3 жыл бұрын
Just had the same issue after taking it apart I found alot of unburnt fuel perfect after a good clean
@MrMeltedwellies
@MrMeltedwellies 3 жыл бұрын
Good to know
@riversidecabinsltd
@riversidecabinsltd 3 жыл бұрын
Nice one Mark!
@MrMeltedwellies
@MrMeltedwellies 3 жыл бұрын
Glad you enjoyed it thanks for watching
@ZerHour
@ZerHour 3 жыл бұрын
Its vital the screen is pushed in all the way as it blocks air way also place with the screens machined join to the back opposite tiny air hole in the bore .
@byrne1916
@byrne1916 17 күн бұрын
Burning Kerosene makes these glisten inside. Mine is like new from the factory. Different region have different fuel costs though, for me road diesel is like burning 50 euro notes.
@UK-Blue
@UK-Blue Жыл бұрын
Yesterday I changed the glow plug after having E-03... but didn't have anything to remove the atomiser thingy... I primed the heater several times and then tried to start it. E-03 ! again. Do you reckon it's because I didn't change the atomiser?
@jedics1
@jedics1 Жыл бұрын
Mine throw blue smoke when I first start it up and often fails but usually works the seconds time so I assumed it was just taking its sweet time bringing fuel up from the tank. Yesterday I turned it on and after a few seconds it just switches off and on again with no error code. Any suggestions?
@MrMeltedwellies
@MrMeltedwellies Жыл бұрын
Try fuel pump
@jedics1
@jedics1 Жыл бұрын
@@MrMeltedwellies I was unable to get the atomizer out because its snuggly up against the walls of the shaft and I do wonder how it can heat up and allow the fuel to pass through it like that but the rest of my unit seems clean inside eg. its dry with no tar, the interior fins are black but the bottom was still showing bare metal so I doubt the atomizer is blocked. So I guess buying a new pump is the most logical choice followed by the glow plug.
@krispeterson1021
@krispeterson1021 Жыл бұрын
Is it a tube or a cup
@MrMeltedwellies
@MrMeltedwellies Жыл бұрын
tube
@davegee435
@davegee435 4 ай бұрын
Looks like you swapped the 12v glow plug to a 24v one?
@jimomeara9804
@jimomeara9804 3 жыл бұрын
You need to strip the heater down and clean it out
@MrMeltedwellies
@MrMeltedwellies 3 жыл бұрын
Cheers Jim just got one more thing to test fuel starvation ?
@soggz4246
@soggz4246 3 жыл бұрын
Does the glowplug have a coating on it which can crack off please?
@philmurphy5584
@philmurphy5584 3 ай бұрын
Helpful
@MrMeltedwellies
@MrMeltedwellies 3 ай бұрын
Glad it helped
@Richard-e9t
@Richard-e9t 3 ай бұрын
Take it apart clean it out if I'm right the exhaust will be blocked and it'll be the same inside it's not a big job but it's messy I have a video up from a few days ago I shown me doing it step by step
@SteveWrightNZ
@SteveWrightNZ 5 ай бұрын
The atomizer air hole next to the glow plug is blocked
@Mcorpmike
@Mcorpmike 3 жыл бұрын
there is a little hole next too the feul intake and that is closed up, clean that and your ok again.
@alintelisca8944
@alintelisca8944 2 жыл бұрын
There is a video to do that you're right! it is explaining step by step how to clean it here is the video: m.kzbin.info/www/bejne/hpLbiquwmbmLbJY
@wouterke9871
@wouterke9871 2 жыл бұрын
@@alintelisca8944 Thats the best animation explaining the screen EVER. Worth to watch or scroll to the animation
@tezzaskayakfishing
@tezzaskayakfishing 8 ай бұрын
It’s negative pressure in the fuel tank. Loosen the fuel tank lid a bit
@johnqpublic9074
@johnqpublic9074 3 ай бұрын
Step 1, kill the power before you damage the board or controller. Never hot swap em.
@juliolouro9755
@juliolouro9755 2 жыл бұрын
what is the size of the spanner , to remove glow plug ?
@billys.5580
@billys.5580 Жыл бұрын
12mm
@coachgeo
@coachgeo 2 жыл бұрын
hmmm... so is fuel dripped down the automizer.... or shot across it?? or neither and the atomizer is more of a way to create hot spots to help insure all the diesel fumes get combusted? guess Im not understanding where the fuel is introduced into combustion chamber.
@coachgeo
@coachgeo 2 жыл бұрын
ok..... found the answer.. it gets either dripped or injected-ish? onto the atomizer.
@coachgeo
@coachgeo 2 жыл бұрын
further discovery.. the fuel is sprayed/injected-ish out of an orifice onto the atomizer screen
@mazman8343
@mazman8343 3 жыл бұрын
If any man can fix it you can 👍
@MrMeltedwellies
@MrMeltedwellies 3 жыл бұрын
Thanks Maz
@mazman8343
@mazman8343 2 жыл бұрын
Mark did you ever fix it and what was the problem .a new video on the fix
@charlietango1635
@charlietango1635 2 жыл бұрын
I think maybe the burn chamber is clogged up with carbon, you may have to strip it down further.
@MrMeltedwellies
@MrMeltedwellies 2 жыл бұрын
spot on
@jamesbradley9233
@jamesbradley9233 2 жыл бұрын
50% red diesel, 50% kerosene runs cleaner
@nomsayin
@nomsayin 2 жыл бұрын
The listed link is broken.
@64maxpower
@64maxpower 2 жыл бұрын
They get carbon and regardless. I can't believe how much Harvin was in the burn chamber. I typically run my heater on high.
@busbuilduk1397
@busbuilduk1397 2 жыл бұрын
What was wrong with it ???
@MrMeltedwellies
@MrMeltedwellies 2 жыл бұрын
cracked
@alintelisca8944
@alintelisca8944 2 жыл бұрын
Look for m corp answer there is the,, secret '' how to properly clean it and will work!not always is the glow plug but it first on the list to check, then the rest, small trick fix big problems here you have a video how to: m.kzbin.info/www/bejne/hpLbiquwmbmLbJY
@twowheeledsmurph
@twowheeledsmurph 2 жыл бұрын
@@MrMeltedwellies cracked?
@alacosta5265
@alacosta5265 2 жыл бұрын
Video by Adam Gilbert shows several smoke issues resolved. hope it helps. kzbin.info
@MrMeltedwellies
@MrMeltedwellies 2 жыл бұрын
cheers will have a look
@klaazzaz
@klaazzaz 2 жыл бұрын
Adam explains it very clearly, thanks!
Chinese Diesel Air Heaters - Part 9 Glow Plug & Atomizing Screen
17:15
Inside the inside of a diesel heater burn chamber
7:32
David McLuckie
Рет қаралды 15 М.
-5+3은 뭔가요? 📚 #shorts
0:19
5 분 Tricks
Рет қаралды 13 МЛН
ССЫЛКА НА ИГРУ В КОММЕНТАХ #shorts
0:36
Паша Осадчий
Рет қаралды 8 МЛН
Andro, ELMAN, TONI, MONA - Зари (Official Music Video)
2:50
RAAVA MUSIC
Рет қаралды 2 МЛН
How to easy  Change Glow Plug Cheap Chinese Diesel Heater
24:08
Mel's Big Van Small World
Рет қаралды 21 М.
Chinese diesel heater factory default settings
5:17
Mark Davies
Рет қаралды 92 М.
CHINESE DIESEL HEATER ERROR E-03 GLOW PLUG
8:45
Mark Davies
Рет қаралды 43 М.
Unlimited heat for your home! DIY heater does not require electricity
22:24
How to replace the atomizer screen in an Espar D2 diesel heater DIY
20:27
Sprinter Discovery
Рет қаралды 29 М.
Chinese Diesel Heater Fix - Glow Plug Replacement
31:46
Jon's Workshop
Рет қаралды 11 М.
204. E-08 Error - Chinese Diesel Heater
16:43
Ralph's House
Рет қаралды 27 М.
Glow Plug - Chinese Diesel Heater - How To
7:27
The English Hobby Machinist
Рет қаралды 693
Unfiltered 100% Waste Oil Vs Stock Diesel Heater
19:38
SteinFab Garage
Рет қаралды 588 М.