CHINESE DIESEL HEATER ERROR E-03 GLOW PLUG

[@simondaly5737]

Thanks for video very helpful

[@MrMeltedwellies]

Most welcome

[@demil3618]

It’s A-04 on mine but I tested the glow plug and it works. Question: What résistance should a healthy glow plug have?

[@chrisneedham5803]

I found that very interesting. They don't make people like you anymore. 🍷🍺👍🏼

[@MrMeltedwellies]

Thanks for the compliment Chris thanks for watching mate 🍷🍺👍

[@BS-ql5nl]

Actually easier if you order one from a UK supplier on ebay.

[@dudeleboski2692]

Have you’ve checked the continuity of the Glow Plug?

[@ernestchapman898]

What is the size of the socket for the glow plug

[@MrMeltedwellies]

12mm

[@matttierneysr7406]

On going issue I haven’t even got mine to work yet it’s got the fault junk

[@dudeleboski2692]

Mark, what diameter was that screw/bolt? Cheers.

[@MrMeltedwellies]

10 mm

[@preachers4135]

What size wrench did you modify with the grinder to remove the glow plug?

[@mattpearce5712]

Most likely a 12mm

[@neodymkonzept113]

When you open the basket with the 4 hex screws you can also use a normal wrench to lose the glow plug

[@tkipta84]

I just installed my heater the other day. It turned on once with no issues. Then I tried turning it on the 2nd time and I keep getting error 03. I purchased a new glow plug and replaced it and I continue to get the error code. Any recommendations for troubleshooting? I’ve also contacted the seller for assistance. Still waiting on reply.

[@pollyperkins6931]

Did you get a reply? I did. They simply gave me Hermes phone number!! Great. I since tried priming the pump because just filled it up and thought maybe some air got in, as I was doing it I saw smoke coming from the air outlet, and noticed the fan was not running, so I think mine is Kaput. Straight from China so not much chance of getting any refund. I see there are some UK sites selling these with a warranty so, although if you are reading this it means you have already bought one, choose your seller well.

[@Neiiil]

Did you get it working? I’ve had the same issue. Started fine during priming Now E-03. I replaced the glow plug but nothing.

[@martini426]

@@Neiiil Same here! First I had 04 error, solved that now giving me 03. It's brand new. 🧐 Did you solve that?

[@grahamfrear9270]

That was very helpful thank

[@MikeKennedyOfficial]

Mine looks fine but I still get that error. It was after we came back from sailing. Thought maybe water got into it but I didn't see any. Maybe the atomizer screen is clogged up or something? Voltage should be fine, it was fine the last week.

[@DannyCalderon]

I get an E03 code when I plug it in to electricity, but it works fine when connected to a car battery. Any idea why that is.

[@jeffreymartin5151]

I think I have the same problem. Did you get a reply yet?

[@offshoretomorrow3346]

I've got E - 03 - but nothing else is working - no pump or fan noises at all!

[@redle9485]

Hey guys, I just bought my diesel heater last night and I installed it and worked perfectly. But today it showed error E 03. Do I really have to change the plug when the heater is new???

[@redle9485]

I have checked the plug and it's fine

[@MrMeltedwellies]

could be battery low or fuel

[@redle9485]

Battery shows 12.6Volt. What do u mean by fuel? Is the filter/pump maybe installed wrong?

[@pollyperkins6931]

@@redle9485 I have the same problem, ran a tank of fuel through with no problems, re-filled it and now have E03. Can't believe its the glow plug after 10 hours running full blast. tried it with 12.5 volts andd 14.2 volts, same problem. If anyone figures this out or gets a reply from china please do post on here. Great video Mark.

[@redle9485]

@@pollyperkins6931 I even took out the plug and it was fine, I really don't know what the problem is

[@CiaranGallagher77]

Is an E03 error code possible on a brand new unit

[@MrMeltedwellies]

possible

[@philmurphy5584]

Helpful

[@MrMeltedwellies]

Glad it helped Phil

[@vw_beachbuggybrookster]

i have E - 03 error code on new Vevor heater straight out of the box . messaged seller see what happens. i have a max speeding heater no issues

[@mrchrisknight315]

The vector heaters are crap. I have had nothing but issues using mine for the past 5 months. I wonder if other brands are betternot sure if I want to chance waisting more money, might just suck it up and go with a direct vent propane unit, wlthought I'll be at the mercies of costco since propane any where else is way too expensive.

[@Evilslayer73]

Hi i have a nasty problem with my chinesium heater i had an error 03 and after replacing the glow plug im still having the same error !its very frustrating what it can be anybody had the same problem in the past!

[@MrMeltedwellies]

i did have a fuel pump problem as well

[@sukhjinder138]

hello my heater is showing E-3 and shut off after like 5 seconds when i turn it on. its E-3 not E-03 i dnt know if they same or not ..??? please help

[@MrMeltedwellies]

99% E-03 glow plug take it out to see if its cracked

[@dangeroustoman]

Where is the best place to get parts from?

[@MrMeltedwellies]

ebay

[@jimmurphy4703]

It could be because you don’t have a battery in line so when the kill switch is used while the unit is still working the heat will fry your motherboard

[@scottholmes8359]

E-8 code,diesel is also going right threw heater and coming out heater port,sware sware sware, its a brand new heater and a second one to boot

[@jimmurphy4703]

Oil the hinge! Lol