cvtech clutch installed on a 2019 Can am outlander 1000r xt.

Installing the cvtech clutch finally!!! my 2019 Can am outlander 1000r xt can stop smoking the belt.

[@Hennes003]

Another good video Robert. I won't be changing my clutch anytime soon but now I know how. How do you like the clutch?

[@RobMillerATV]

I love it. It still needs some tuning In the secondary. I'm waiting for someone who knows more about it to guide me thru it. But i will definitely pass on anything i learn to KZbin. Glad you liked the video! Great to get positive feedback. Thanks

[@ecureed]

Love the channel sir, very helpful

[@ajjacobs1338]

Great video buddy very informative seeming how I just got the 2021 outlander Xmr 1000r this is very useful

[@RobMillerATV]

Mission accomplished! That's why I do the videos. Glad I could help. Thanks for commenting as well. Check out my other videos, iv done a few modification videos on this quad.

[@ajjacobs1338]

@@RobMillerATV indeed I will

[@1966cambo]

Helpful to put 2 nuts on the long clutch release bolt,tighten them together and they should stay,or you could use permanent locktight Thanks for the videos, well done.

[@RobMillerATV]

3500km and iv had an antifreeze leak fixed by warranty and blew 2 front shocks.

[@jasonmorehouse3756]

Good vid.

[@RobMillerATV]

Thanks Jason.

[@RevDevGaming]

Do you have to do this is the stock clutch not good? I’m trying to buy this 4wheeler for trails but I hear a lot about the clutches not being good.

[@RobMillerATV]

If you run big tires it's necessary.

[@CF625TR]

CAN I PUT CF600 cvt rear variator to segway? Whole secondary I mean does it compatible?

[@RobMillerATV]

The stock secondary on the can am works great. Not sure about Segway.

[@cinaciccio1]

Why you changed the oem primary bolt? And wich bolt did you put on? Thanks

[@RobMillerATV]

The oem is a stud. The bolt is easier. I ordered a bolt for a 2015 I think.

[@livelaughlove20able]

Hey rob what did you torque the 30mm nut to ft/lbs??

[@RobMillerATV]

I can't remember. But if you watch my cvtech tune video I think I mention the torc specs

[@eduardodeleon5339]

I just installed a cvtech on my 1000r xt after installing now i have trouble putting in to gear R H L what could be the problem

[@RobMillerATV]

You will have to take the clutch cover off and look. Your primary shouldn't spin the secondary at idle. If it is, then u have an alignment issue, one way bearing is on backwards or the weights are way to heavy.

[@eduardodeleon5339]

@@RobMillerATV i got the cover off and primery does not spin at idle i do not know what weights i have

[@RobMillerATV]

@Eduardo De Leon if the secondary isn't spinning at idle then it has nothing to do with the clutch. It's probably the shifter linkage.

[@eduardodeleon5339]

@@RobMillerATV i tried adjusting it but still no change

[@RobMillerATV]

@Eduardo De Leon I'm out of ideas. Sorry

[@johnyboy4205]

Cvtech says torque spec is 133 fp

[@RobMillerATV]

For the nut that holds the outer clutch to the inner yes. But the bolt that holds the clutch to the shaft is only 75 to 80 pf.

[@johnnyhelems5296]

Tap on it

[@rossmunro8559]

I wouldn't take any advice from this guy

[@RobMillerATV]

Don't forget to subscribe lol