How To Get The Best Color Accuracy For Govee Immersion/DreamView TV Light

[@poppinhoff4339]

I really wanted this product, but after watching multiple reviews I became discouraged. I would see random purples and reds displayed on the backlight when those colors weren't present on screen. None of the previous reviews I saw took the time to dial in accurate settings like you did. This was the best demonstration of what this product can acheive. Great video, glad I found your channel today! P.S. you were also the only person who even attempted to place the camera below the screen. That was another point of concern, I dont like how it looks mounted on top of the tv. But now I know I can conceal the camera below screen and out of sight. Very thoughtful approach all around, you have earned a new fan! 👍

[@agd712]

Just got mine today. Camera set below with these settings, couldn't be happier with the product! Highly rec.

[@kennethpaulvillaflor]

Buy the Lytmi brand bro, waaay the best one out there more than Philips hue

[@mikseinimikelpaa]

​@@kennethpaulvillafloryeah with triple the cost

[@reprep8423]

I will say that I understand the concern and some greys get picked up as blue purples as red etc but honestly when you aren’t dead focused on the backgrounds lights it’s hardly noticeable I almost didn’t get them for the same reason but after using them for a couple days now I will say it’s really not that bad but that’s my opinion so do with it what you will. Hoped this helped someone ✌️

[@Vanillabean315]

This new govee backlight 3 lite is no joke. Heaps better than the T1

[@patrickgaerlan]

Just got my Immersion Kit today and this video was invaluable in helping me set it up the way I expected it to look. Thank you!

[@muratkarabeyaz3344]

I've been configuring my kit as well just some advice bear in mind that the unit needs some tlc in every lighting condition, when watching playing in dark environments make the brightness around 17 to 25 this is so that the light bar can even switch of some parts to even show the blacks in scenes 😎😎😎

[@allthingshome6953]

THANK YOU!!!! I have made the purchase but waiting until my couch gets here to set up my govee. I wasnt confodent i could do it but i am confident now!

[@5t3l335]

I have had one of the immersion kits for around 5 months now and as much of a great bit of kit it is it can be a pain in the backside when it comes to calibration 😅 .. after watching your video I have made adjustments and believe I have improved the colour's to match what's on screen to as close as possible 🙂 thanks for your help with this video it makes calibrating clearer and make more sense 😁👍

[@tac6044]

Why wouldn't you put your white balance setting dead center? Wouldnt that be the most accurate?

[@5t3l335]

@@tac6044 you’d think that but it doesn’t.. I currently have it set on the cool side towards the end and that is as close as I can get it , they improve these things now and then with updates including how the white balance works

[@TTV_Vela600]

Wow, thank you for this, literally day and night comparison when settings are tweaked as they should. This is GOLD!

[@MrTekSuggest]

Glad it was helpful!

[@ImpossibleMemories1]

Nice one man! You have helped me so much, after owning this for months and finally happy with the colour!

[@ALWTunes]

Nice! I didn't even know they'd patched in the white balance setting until I saw this video. It's a night and day difference. So much better now. Thanks for the tips.

[@TonyStark-fr3ns]

I bought this set up based off your reviews and videos and got to say love the new immersion kit I had the old one but this is definitely a big upgrade!!! Thanks for all your videos great info

[@MrTekSuggest]

You bet man!

[@MB-vk8cv]

@@MrTekSuggest What size TV do you have the 65" kit running on?

[@livibam]

Mine arrived yesterday.. waiting for a C1 to arrive on Monday. Hopefully it will be a slick set-up. Will def take your advice on board

[@keatonwest3919]

Another way to tune it is 85% saturation and 36% brightness. Not as accurate but looks amazing

[@coooooooow]

They really should add a percentage or an indicator on the saturation and white balance bars. it would be easier to tweak.

[@MrTekSuggest]

I couldn’t agree more! Sometimes following an update the Settings will be thrown off, and I will have to dial them back in. It sure would make the process a lot easier.

[@marcelm9863]

Got the "old" immersion kit without the two bars and I would be happy to have that white balance option... No update available

[@mynnikyo]

thank you kind sir! this was perfect. I was wondering why everything was so red... now all the colours actually match. Happy happy!

[@johngewargis1027]

Nice! How did you get the calm and dynamic setting?

[@missjuggalynne420]

Thank you for this! I’m Not sure why I never thought to go tweak the settings in my tv instead of putting all the weight on my T1. I have never even seen this mentioned in the Govee app either. So glad I stumbled across your video!

[@thaisnardi5550]

Tks for all tips!! Bought the kit, installed and calibrated following your videos!

[@liesinc.9322]

I just applied you guidance to my setup. What a huge improvement! Thankyou!

[@BennyChains88]

Thank you for your suggestions! I've implemented them with my light strip. Everything looks great, so far.

[@willmunshower8401]

Thanks so much for this video. I just received my Govee color bars yesterday. I was disappointed with the immersion. Then I found your video. Viola!

[@jimenezsocco6020]

Just got my kit today and this was incredibly helpful!!

[@jimmyharrison5411]

This was SUPER helpful. I just picked this up for my 55 inch tv for movies and 43 inch for gaming. Thanks man!

[@peterlozano6503]

I've heard many people who bought the 55-inch kit putting the camera below the TV instead of on top. Where did you put your camera?

[@jimmyharrison5411]

@@peterlozano6503 I liked mine on the top. It's more stable to me.

[@thebohochocobo1674]

Thank you. Just bought and set up and was a little upset at all the reds, and the lack of accuracy. After following your tips I was able to find the ideal settings.

[@MrTekSuggest]

Awesome

[@firewulf1]

I got to really install and test it today and first thing I found is that red is overused and white and blue underused. Glad I found your video, can't wait to calibrate it right.

[@PiqueBlind3r]

thank you so much had my govee immersion just over a year and never had it true to colour after watching your video and following your app settings and tv settings ive got it looking the best ive had it thankyou so much 😁

[@anthonydavis8861]

Thank you, your tutorials help me a lot setting this up and your settings advice are spot on!

[@psych7211]

The background on the wall makes this 10x cooler than it already is

[@MrTekSuggest]

Govee tutorial playlist: kzbin.info/aero/PLlBh9QYB22d8Oz5eXM8xbFl3HnQ1y31JJ

[@talus]

Thank you for all your vids. These changes definitely helped smooth out the kinks.

[@HaitikidNY]

Your vid helped me so much. I always had so much red in the background. The white balance info helped a lot. U da man!!!

[@adeharris4457]

Excellent explanation I would never have thought to adjust the tvs settings it's helped me a lot thanks

[@KeifeyMcfly]

Man, you just increased the accuracy of my Govee so much. It looks way better now it’s not showing colors that it’s not supposed to or anything.

[@SpiderGMan]

Thank you so much! I was toying with the settings to get the best results and if it wasn't for your video I'd still be lost in the app, moving sliders

[@thejroc]

So helpful, I've had my LEDs for 2 years and had no idea about the saturation like holy crap! Thanks dude! Also where do you have your camera placed?

[@talhakanwar6101]

I was wondering the same thing. it looks so much cleaner without the camera sticking out.

[@dave9732]

You got a subscribe from this video. You just made my immersion experience that much better. Thank you!!!!

[@noobist85]

I thought it looked good out of the box, but with your suggested settings it looks damn near perfect.

[@FTM1fenn]

Just bought the G1 and glide wall... Researching as much as possible before Christmas day cos more Govee is coming... I'll be saving this vid as well for when that time comes... Feeling more excited than the kids 🤣😂

[@mikimone]

Thank you very much for this video. It is very useful for me and the users of this product. What do you think about the reaction of this product to pure blacks on screen? What recommendations can you make? Best regards.

[@MrTekSuggest]

I personally don’t mind the lights shifting down to cool white glow. It makes for a better experience over time on your eyes. But I would love an option for blacks to shut the luminance off entirely.

[@mikimone]

@@MrTekSuggest Thanks again 👍👍👍

[@leasimms4495]

Honestly really helpful as Govee products are new to me. I’ll be playing with sitting tonight. 👍🏼

[@justinjorgy]

Any idea what the new "relative brightness" setting is and how it defers from the regular brightness setting? and what do you think is a good number for it to be around?

[@giorenaud9657]

The settings changes made a big difference thanks

[@gldi8hr]

That wall does enhance those lights experience❣️🤯

[@MrTekSuggest]

Long time no see 😁

[@comms97]

I love your videos, straight to the point and great to watch. Thank you for your content! I have a question about the lights. I was wondering if I can buy the led strips and light bars separately and will be able to use one camera. Or do I have to use two camera's and buy the immersion kit to use one camera for both. Thanks in advance and keep up the great work!

[@MrTekSuggest]

Glad that you enjoyed! You can definitely purchase the strips standalone with a single camera and you can even purchase the bars as a standalone with a single camera as well. Or you can go to hybrid route which uses a single camera to power the strips in the bars simultaneously.

[@NeutralGenericUser]

@@MrTekSuggest How would that work though? The box that comes with the strips only has 1 USB C output, rather than the 2 found in the model with the bars

[@MrTekSuggest]

@@NeutralGenericUser In order to utilize a single camera for the strips and bars, you will need to purchase the immersion kit which features two USB-C ports (1 for strips, 1 for bars)

[@Caninehandler]

@@NeutralGenericUser I had a pair of light bars which works perfectly well with the immersion kit bought separately

[@Vanillabean315]

Can you make a new video guide for the Govee Backlight 3 Lite? Or is this sufficient?

[@MrTekSuggest]

Hey man you may find this video helpfulkzbin.info/www/bejne/hZrXp2mDdr2Ed68si=231VquBv4k0TG-zj

[@Izthefaithful]

Just bought those myself and I really like them my only problem is it displaying a greenish color when there’s dark or black scenes during movies and games

[@Vanillabean315]

@@Izthefaithful not a problem with me. It actually looks close to black behind the screen in black. On the T1 it was gray behind the screen, and sorta green when I looked at the LDS.

[@Semaj.18272]

I was about to not buy this but I watched this video wow so perfect how u programmes it

[@SkyTightGaming]

Okay another great video from a up and coming KZbinr y'all stop playing this man got skills with a camera

[@MrTekSuggest]

Thank you sir!

[@beerad5036]

Love your videos and reviews!! What entertainment center is that?

[@ThiagoDias76]

hello, thank you very much for your help, I am collecting information to set up my room. Could you explain why two cameras? Does performance improve? your option? or is it for other devices?

[@ashleydawn8434]

Amazing video! Thank you so much this made set up so satisfying!

[@pascalspellerberg]

This helped a LOT Thank youuuuuuuu :-D

[@Beast-tj9oy]

Quick question how did you make your Govee light bars white like it’s body because Govee sells it only in the black body color let me know how you did it or a video would be much appreciated thank you!!! :)

[@naterodriguez4110]

What's your thoughts of Govee new G1 Pro Gaming Light? Will you make a video using 2 of them connected. And maybe a side comparison.

[@MrTekSuggest]

Yes and sorry for the late reply! kzbin.info/www/bejne/hpCQq32lep18a5o

[@compeh]

Thank you for the detailed video even though I don't agree with warm 45 for my oled at all hehe

[@FRDY_87]

liked and subscribed bro , great video it helped me allot but I had the T1 for a while and upgraded to the T2 but for some reason my left side is less bright than my right ? Have any suggestions Mr Tek??

[@Teagill]

My TV is so accurate now. Thank you.

[@muchos38]

Salut super vidéo Pour quand réglable T3 lite svp

[@Numenorians]

Hi .I have RGBiC WiFi+ Bluetooth coated led strip model H619C (10M) Eu, since I am in Europe .My question is, is it the best option to sync that strip with TV strip to buy DreamView T1 Pro TV Backlight H605B model and instead of bars,plug in strip in that USB slot ? Or I can use bars and strip and get uniform colour on all three lights ? Or just the H6199 immersion TV strip with RGBic coated strip without bars ? Like the work btw,and subed ofc...

[@jaralleca]

that you so muhc, this helped a lot! was soo annoyed my monotone colors were immersed as yellow or orange

[@zeromaverickhunter2718]

How did you get your yellows to look so good. Mine come across as having a slight green tint Thanks!

[@gonzaporto3872]

Excelente video totalmente agradecido ya que acá en argentina ninguno lo detalló así . Más que nada por los subtítulos . Me quedo excelente ahora la imagen gracias a vos, me suscribo y saludos desde Neuquén capital, arg 🖤🇦🇷

[@raphaeld.6671]

Great video and instructions! One question: Where did you place your camera?

[@MrTekSuggest]

Here you go! kzbin.info/www/bejne/foXRgqWJpbasbKM

[@nynjasmurfable]

Damn this was very helpful. Thank you

[@zeromaverickhunter2718]

I am having a really hard time with calibration. I have a 10 yr old LG LCD if it makes a difference. I have calibrated over and over but cant get my settings like yours

[@GreeKurdChannelMilan]

Could you please tell, in the white balance settings, how many clicks you went starting from Blue ->>>>? Red.

[@michaelhilbe2991]

Hey buddy, I know this isn’t in this video but I was wondering what you use for under sideboard/tv stand lights? Is it the rope, bars, or just leds? Thanks for the help

[@MrTekSuggest]

It is actually the 32 foot RGBic Pro light strip. See link in description

[@jimbolowe9547]

Thanks man, where’s the camera on yours?

[@MrTekSuggest]

Here you go kzbin.info/www/bejne/foXRgqWJpbasbKM

[@xander2753]

There has been a lot's of talk that ND filter can improve cam and color recognition. I have ordered one and will be testing it, but for sure would love to see your test and hear your opinion. Did you maybe test it or have any plans to test it ?

[@TonyStark-fr3ns]

I bought the ND filter and it does do a better color in my opinion

[@khvlil6803]

How is it? Is there a big difference?

[@TonyStark-fr3ns]

@@khvlil6803 I really do feel there is I have taken off filter and watched different videos, gaming 4k blu rays and when I put filter back on it seems that the color is more spot on , granted I bought the new light bar immersion kit. But with Nd filter it’s awesome just takes time messing with dial to get where you are happy.

[@Ryan-rr6tz]

@@TonyStark-fr3ns I was thinking of picking one up but know nothing about it, just want to improve color accuracy even more... What is it called on Amazon so I can pick one up? Much appreciated

[@TonyStark-fr3ns]

@@Ryan-rr6tz ZSooner 37mm Clip-on ND 2-400...

[@rflaherty83]

I’m hoping this comment reaches you for help. I don’t understand how you can get the colors to split in the back? If I have two colors on my screen, it seems to just stick with one and it’s not splitting the colors like yours does. Like if one side on my tv is blue and the other side is yellow. It picks one color and it’s not splitting. Any help would be great. I’ve changed all my settings like your video recommended. I’ve also re-calberated the screen with the orange sponges. I’m lost and could use your advice. Thanks you

[@MrTekSuggest]

Hey man, it sounds like you may have the setting inside of the app set to “All” in the video mode verses “Part”.

[@pompaglebinowa6959]

A tyle kombinowałem miałem włączone wszystko dzieki . Cieszę się jak dziecko działa pozdro

[@davidaj73]

Hey. Thanks for your insight. What is the distance from TV to wall?

[@Vardoulika]

Curious where you have the camera mounted with this new setup? I checked out the kit from the link in the description but it still shows that it uses the camera that would normally be mounted to the top or the bottom of the TV but, in your video I don't see the camera mounted anywhere.

[@timoreilly770]

I was wondering also hehe

[@NeutralGenericUser]

I have the newest hardware for the control box and light strips, and the latest firmware/app version. I've also power cycled everything. Still, I don't have a white balance setting :( Govee customer support claims that the newer cameras have auto white balance and do not need the setting, which sounds like a bullshit answer to me. Excellent video by the way!

[@MrTekSuggest]

What model and hardware version are you using?

[@NeutralGenericUser]

@@MrTekSuggest I just realized I have the old HW version (1.00.01). That's ridiculous that they sell both under 1 label. I just bought it less than a week ago from Amazon too. I'm gonna contact Govee to see if they'll send me the new one. I wonder if just the new box is good enough. I really don't want to deal with taking down the strips

[@MrTekSuggest]

@@NeutralGenericUser Swapping in the new box with the existing strip should suffice. Try to have them send out hardware 3.02.01 or higher

[@NeutralGenericUser]

@@MrTekSuggest Awesome; thank you so much! P.S. I've said it before, but I'll say it again. Absolutely loving your content. Reminds me of KZbin back in the days before everything became filler/sponsored content. You have such an excellent presentation, and I love your sense of style when it comes to decor. You should do a room tour! I know you've posted specific items you have in your setup, but it'd be cool to see the whole thing in one video.

[@rafaelriojas3845]

My app doesn't have a dynamic/calm setting? Can't find it anywhere in my app

[@consumerreview2k]

Is ir really necessary for the 2 light bars to really be an entire 20inches away from the tv on each side?cause that's what govee recommends but for the average person they don't have a dresser or a stand that long. Would that have to be like a 90inch wide dresser or stand?

[@hnkdarkness]

What do you think about using a ND camera filter have you tried that or just found it to be unnecessary?

[@MrTekSuggest]

I personally haven’t used a physical filter on the lens and haven’t really found it completely necessary, especially for the latest model I’m currently using. But every situation and environment is different.

[@iordachescucodrin4876]

What's a good distance of the tv from the wall for better immersion?Thank you.

[@cavetownbaits]

Dude. You just changed my life😂

[@JWard2]

Tek, if you have a govee rep please tell them following: We'd like the next version to have: -RGBWW light strips with more LEDs in the strip -an 85" - 95" tv size strip -turn off the segmented lights in the strip when that side of the TV is black. -4k camera lens

[@andrewgoshal2478]

My problem is inside the dreamview , can i calibrate it ? Colours are extremely saturated (i have t2 ,neon rope and two lyra floor lamp) , but i dont have issue when using the t2 alone bc i have already picked the right saturation

[@jpod]

Excellent video, looking forward to more!

[@RafaelCorradino]

what setup do you recommend for bars only? we have huge issues with color accuracy here, any tips?

[@Revell25]

I think im going to try recalibrating mine… in some corners its def off. I have a LG C1 TV and the bezel/ trim is super thin and feel like the image doesn’t start exactly at it if that makes sense. When using the orange squares to calibrate did you literally put it right at the corners or cheat in a little? When watching TV selecting ALL instead of PART seems like the only option for it to look decent but want to use the part option. Also, im guessing this doesn’t work the best when watching sports? Thanks for any feedback!

[@wesleythigpen9192]

I’d be interested to see how close you could get it on an LED tv. I love your content and think Govee should be looking to get you on board!

[@MrTekSuggest]

Thanks for watching! If I’m able to get my hands on the 75 to 85 inch model, i’ll be installing it on a traditional LCD display to test out

[@unityelt]

Where is your camera placed?

[@crustyoutlaw2322]

Thanks bro! Looks much better now 👍

[@NameisNotImportant_]

Thanks for the tip about white balance. I was wondering why everything was showing red, including a black screen.

[@Est33n]

Thanks bro I order my kit… can you do a review on the light bulbs

[@MrTekSuggest]

Hey man I touch on the bulb that you m currently using in this video kzbin.info/www/bejne/jJ3TqmihhcqaZ8k

[@Reallikemaik]

Are these settings good for gaming or are there more aviable?

[@laustpeternielsen-norman9569]

Love what you do with it. My problem is that my TV is on a dark green wall, that change the colors. I can’t get the right colors to match the tv

[@jacksonludwig8560]

My TV's older and plasma. Does Govee still work with that technology? Finding the colors to be pretty off even with adjustment. I thought maybe the camera was mounted too low, but it is not accurate to what the TV is showing at all.

[@ericpalmer3664]

Do you keep your brightness at 100%?

[@daniel243ish]

Mr T what TV do you have now?

[@ScarWolveGaming]

Which one I get from Amazon? So many to choose on app

[@mverdin0302]

what method do you like best for calibrating the camera, using the foam squares included or a one of the videos on KZbin? If a video which one do you recommend can't seem to find one that gets the job done the best.

[@MrTekSuggest]

I’ve been primarily using TV digital calibrations for the past few months. I’ve had great success with and I can avoid TV residue or damage. I am using an OLED display however, other display technologies may not perform (or be picked up as well) without the physical squares

[@danielmcdonnell9110]

Hey great video. I have the kit with the camera. I can't notice yours. Witch is great. Can you let me know where you put your carmea. Thanks 👍

[@MrTekSuggest]

Here you go! kzbin.info/www/bejne/foXRgqWJpbasbKM

[@alfredoowns12]

Definitely been struggling with the annoying purples and blues. Wish they implemented a smart feature to where the camera studied your environment and adjusted over time. Have the kit on a 82" TV and it's not bad just takes a lot of messing aroud

[@HelllaClutch]

Do they sell the new light bars from the kit separately? If not, are there plans to?

[@chrismejia6894]

The back of the tv. The wall itself with the grooves. What is that? I've seen it before do u buy it?

[@aktoyourface]

Can the bars be used on there own if I upgrade to the bigger ones want to be able to use old ones in another room on there own

[@ThatOneGuyFromSchool]

Could you do an updated version? The app is different Just got Govee's AI synch box and I wanted to use your video, but some settings are different now 🤔

[@bugi3405]

where to find the white balance settings?

[@Limitbreak09]

Where did you mount your camera? Just curious bc i dont see it lol

[@MrTekSuggest]

Here you go kzbin.info/www/bejne/foXRgqWJpbasbKM

[@johnpauljones618]

Thinking about getting the dreamview T1 tv back-light and these light bars that's in the video would that be over kill ?

[@Eagles30]

What area settings do you have your light bars in dreamview my light bars are positioned just like yours