Beko WM5100W washing machine reset/self test mode

[@traceyrea5021]

I would like to give you a HUGE big thank you. I've searched online to find how to get machine to work and yours has sorted it out. Thankyou

[@blankaobolecka5900]

Už u k) jlo0oppojb. Niii9

[@nouranoura7453]

اشرحي لي اختي ماذا قال انا لم افهمه

[@lucymia]

Thank you so much! I was going nuts with my Beko washer (different model) just flashing me the "Open door" sign without doing anything, but following your steps, I finally got it to work. You saved me a trip to the laundromat. Thank you.

[@mediumgordy]

Its January 2nd and the last thing I have money for is a new washing machine but thanks to your video I was able to wok out it was the motor and then found a bad conection , all good now . Thanks alot . G

[@44brybry]

we have a wm6100 washing machine and stated playing up, would not spin or load with water, we used this vid and it now works perfectly. big thanks to you

[@jeremyburrowes9666]

I ran the test mode and it seemed to reset everything and worked thereafter. Thanks.

[@sarahmcmeerkat323]

Thanks so much for posting! My washing machine's been on the blink for ages but I followed these instructions and it's working again! :)

[@MegaChocko]

Just tried this on my WM5120, the machine wasn't heating up. Hey Presto!!! It now works fine. Thank you very much.

[@spick62]

Just when I thought I was gonna have to buy a new washing machine - we found you! Thanks for taking the time to make and post this video - it helped us to fix it ourselves. Thank you and Happy Christmas! :)

[@renilaci2759]

Yg

[@huwwilliams9714]

Thank you my friend , used this yesterday to test my stepsons` machine , worked a treat , found problem in outlet tube - a bit of sponge blocking the pipe .

[@DewanaShah]

Thank you so very much, I needed to reset/self-test or check the default functions. I have same model and machine was spinning for hours and it then pause with three lights on, it was filled with water. I found out drainage pump was clogged with mat threads and some other stuff. I opened from front drainage and cleaned it, all water came out and machine switched off. Make sure you run machine empty once more to clear remaining clogging, cause mine had lot more stuff that came out next spin.

[@jojomorrice842]

Thank you so much for posting this, saved my daughter a call out charge :)

[@fabehanaaz9958]

Thank you so much for explaining it so simply. I was going mad while trying to operate it. Thank you so much man!

[@telbert76]

You just saved me buying a new washing machine. Thank you.

[@YaronMillo]

Hi, Thanks so much man, I wasn't able to get water into the machine after it was in storage for a few years. I thought something went wrong until I found your video. Did the test and walla! everything is fine now. God Bless

[@ileanaticala5541]

God bless you!...you just save me of buying a new washing machine!...many, many thanks....

[@jandrerasgrana]

Thanks a lot. I did as you showed, and after being behaving strangely lately, now it's back to normal

[@iancook2534]

Excellent. I payed a call out two weeks ago and realised that the man had just pushed a few buttons. Just wish I had seen this vid before the I paid! Many thanks

[@nadavtest85]

Great guide! My wash machine didn't work and I restarted it using this video! Thanks!!!

[@mashqar4573]

Thank you. You just saved me buying new washing machine.

[@aaronic1984]

I had a display problem and couldn't select the washing cycle as the display just showed 00.00 for every selection. This fixed my machine. WMBN1242. Thanks alot!

[@ouwehaar]

WOW! This actually worked and fixed my washing machine. Different model but it worked! I was checking everything else and almost gave up hope, thinking I had to buy another machine tomorrow. Thanks for the video mrvanduo1!

[@meme4880]

Thanks a million for this post - great help, especially as I have exactly the same model!

[@SuperSaab340]

Thank you so much! I have another model, but at least now I know how to make reset and my machine is working again. You saved my evening!

[@davegscott]

Awesome job my friend you just saved me £400 and a new washing machine

[@RoryOHara]

Thank you for this. My washing machine has the power option set within the dial but you just press start/pause and then turn the dial from Power to the right 1 step.

[@TheGaryG21]

I use newer model with digital display, but this video helped me a lot. The same process as led version. Simply push start/pause button, keep it pushedand push the main button...

[@ac-go4np]

You are the best. I’m in the gambia in an Airbnb fixed the machine 😅

[@stevenday6323]

Ohh nice one. My wife changed the program and upset the machine.... Thanks for your tip. Saved me 300.00 pound... Chears.

[@laurencejennings1983]

Absolutely great, most kind of you to take the trouble to put this up. Helped a lot.

[@starragav]

Really u saved lot of time and money. Thank u

[@benfingerssmith]

Very Helpful, thanks - mine wouldn't spin, but once I drained it and ran these tests it was fine. Thanks again! :-)

[@adminRQ]

I cant even tell you how much this helped me!!!!!

[@zam6667]

THANK YOU!! you have saved me much ear ache from the Ministry of Home Affairs (wife), Iwish I could thank you in person :)

[@zx8401ztv]

Thankyou for your diagnostic info :-) My beko WMA 510 S accepts the test mode, but you dont have to turn the dial down to the rinse. My beko often fails to spin, if turned off for a min then back on, it often wakes up and then spins. It is a pain in the bum, and like other people i dont know why the computer gets mixed up. Thanks again :-)

[@vitaliykv6584]

Very grateful! I found only in you about test... It very helped me..

[@debbs185]

Thanks so much for this. Really helpful. Absolutely solved the problem! And doubtless saved me a fortune too!

[@reecehiggins2985]

Thanks for this vid just got my machine working from this :)

[@mickthemodNo1]

Brilliant step by step, spot on 👍🏼

[@yazzislife]

You saved my life I cried thinking I was done for

[@BennyBringerOfChaos]

thank u, just saved me alot of money. My washing machine is now working. thank u :)

[@faikhawrami]

thanks brother hope you be well from iraq-kurdistan

[@paulc6583]

Just wanted to say thanks. Self test saved me a callout. Washer-Beko WM5140W. Test worked the same on my model. Maybe the brushes as it spins at 1400rpm unloaded. Problem when with load in, will try again. Thanks P

[@pandasrover]

This was really helpful, even though the washing machine isn't the same

[@Roadrunner9265]

Thank you thank you, have just tried this and all seems to be well again. :)

[@eck1973]

thanks for your upload, i think this is the friendliest youtube comments ever !!

[@obasekishadrach6812]

Thanks man you save me a lot of money

[@raypower1984]

You legend Thank you worked for me on flavel wfa100w

[@KarenC0520]

Thanks so much. I followed this video and washing machine is working properly again. 😊

[@girlgeekcyclist]

Worked a charm! Thanks very much.

[@kayegomez1578]

Thank you so much! I love you! It worked! ❤️❤️❤️❤️❤️

[@Cper2000]

Thank you. Very concise. Topman

[@mandyshaw5248]

Amazing!! Video highly recommended to try :) thank you! Phew...

[@mdoyle403]

Worked just the same with a wmc61thank you sir :-)

[@guzzy063]

Thanks for sharing, very informative and helpful.

[@mumfiemegs]

Thank you. Your information was very helpful and will certainly give your help a go

[@meizkl]

Very easy to follow instructions, thank you. The test worked exactly as your example. So I thought I'd give a wash cycle a try after this test. Turned it off, then on. And the washing machine bounced out of its place under the sink during the spin. Quickly turned it off. Filter clear, could the brushes need changed or something else?

[@mrbeastfancalls]

Late reply, Broken shock absorbers

[@MrLarry172]

Thanks for sharing your knowledge, I was able to fix my washing machine.

[@maxiesmum1]

Thank you so much for this video Helped me a lot !!!

[@tiffs4396]

Thank you this worked for me today

[@declarehispraise3834]

Thank you so much. It worked🥰🥰

[@geoffreycasey875]

Great video.. Thanks..👍🇮🇪☘️

[@karenpannell8973]

hi will this work on all beko's ? mines similar but a smaller kg..

[@joeldias1703]

thanks very much man this helped me alot.

[@AxeMan2781]

Thanks for the video im pretty sure you just saved me some money!

[@jayneepoos57]

Very helpful - worked immediately! Thanks

[@NadineValério-w3f]

You rock !!! Thank you so much !!!

[@pipponefrancone1]

you know of any other tests to latre brands? thanks

[@talaatg]

Excellent 😊👍 what is the shortest cycle?

[@nouranoura7453]

اشرحي لي اختي هو عمل ايه انا لم افهم

[@kennethjennings1877]

Very helpful and informative. Thank you

[@nadiavoitiuk3866]

Thank you very much😇🙏

[@breatharian2009]

Thank you Sir. I have subscribed!

[@cameronmacleod196]

Ilon ilon, thank you, you hero!

[@vickymaxted7809]

Thanks so much you have saved me😁

[@Kilunge]

hi mate thanks very very much for this Video saved the day, thanks mate

[@MonstroUK]

You are a God send. Thank you.

[@MegaBjy]

cheers for that, sorted my machine

[@kynamilton8960]

hi kyna the light on my start button is'nt flashing just staying a constant green thank you x

[@ibrahimelkhalil4689]

Thank you so much it helped a lot

[@lottieyinka5083]

Wow! Thanks, worked perfectly. Just saved me some money. thanks again. :)

[@MrTwattybanjo]

It worked! Thank you my friend.

[@mark1968]

Will this test make the water heat up as my Beko doesn't heat the water.

[@carlospaulino7834]

bro i have this product and the hot (warm) when it finish drying and spin should to leave the clothes hot with smoke and its not working? i did this test 3 times and only 2 times the warm or heater work i dont knot if i use agan the mode 30 minutes the heater will be ON, or is only another modes like (90 degrees, 60 degrees etc )

[@Nepalishortvideos]

It helped thank you sir

[@dominikaszewczyk829]

Thank you for this information, me friend

[@finerside9750]

When running the self test, the first two steps (slow rotation one way, then the other) seems to be bypassed. It goes straight to the fast spin only. No water comes through the drawer, no other self test steps seem to be accessible. Would you happen to know what causes this?

[@matthall5037]

Brilliant bro..many thanks

[@eltocado]

When I test mine stops at test 5. Woule this be an indication of the drain pump gone or also the motor as it isn't going onto a spin cycle?

[@mrbeastfancalls]

Well if IT doesnt have Water, then motor

[@rudebwuy]

Brilliant - you are a genius !!!

[@philippope1]

thank you didnt no how to do this you made it much easy er

[@ikswezclam]

Thanks a lot, it was very helpfull.

[@COMMANDER2301]

thank you buddy. ... great help... :)

[@woods3733]

thank you so so much. worked perfectly :)

[@MauriceHalton]

Thany you sir - my hero!

[@lesliebrannon2191]

Thank you for this.

[@missyhel]

thank you so much!!! very helpfull video

[@lvlister2005]

Thanks very much, all working fine now very much appreciated :)

[@ionaparnowski3331]

Thank you it really works.

[@curiousworld237]

Brilliant...thank you

[@zacy5000]

OMG This man just saved me.

[@AroushSoha]

really handy test thanks