MSFS | BOOST YOUR VR FPS FOR FREE! AutoFPS | ALL VR HEADSETS

[@Peter-55]

I’ve been using this app for a few weeks now helping the developer make it better and better. It’s so good, for VR and PC mode, that you have to wonder why Asobo didn’t have something like this in the sim by default. BTW, the developer is continuing to refine this and further enhancements are on the way.

[@VRFlightSimGuy]

That's fantastic Peter. Please be sure to pass on my thanks, it's great you are helping to support him too. I look forward to seeing how it progresses in the future.

[@Itz_Jack57]

Great app, however I'm encountering an issue where sometimes it refuses to change the cloud quality even though it has reached lowest TLOD and is well below the target FPS. I've tried changing the settings and restarting the sim to no avail 🤷‍♂

[@KinkyJalepeno]

What I would give for some genius to make something like this for Elite Dangerous ❤

[@ResetXPDR]

​@@Itz_Jack57Some cloud quality reduction issues have been resolved and will be available in the next app update due in a few days, so maybe try again after that. If still an issue after that, raise an issue where you downloaded it.

[@Russell_G]

I've been using this non stop since your video dropped, its brilliant! Thank you so much for highlighting things like this that would otherwise has passed me by. My Quest 2 has never looked better!!

[@VRFlightSimGuy]

Glad it was helpful Russell. I'm currently testing something similar to this which may be even better so stay tuned. Have a great weekend.

[@stmichael404]

I’m a convert, I didn’t think initially it would be worth the effort of running it with my 4090, but the ability to top out at 400 TLOD in VR when I’m at a few thousand feet (with the amazing views that gives) without having to then worry about it being such a resource hog when I am flying low level, makes such a difference to the flying experience.

[@waltersbg]

Really good point. You've convinced me to give it a try.

[@PatJones82]

Agree completely! I came to say the exact same thing! It works very well! Love it!! ❤

[@GYGOtv]

Thanks for letting us know about this useful utility, you are great at keeping us all in the loop as it were. Appreciate you Steve!

[@VRFlightSimGuy]

My pleasure mate 😊

[@spectresimshorts1499]

Tried it yesterday in vr- exactly as you say with the fps set to half the quest 2 refresh rate. Beautifully smooth!!

[@PatJones82]

I just tried this and I agree it is awesome! I completely agree with you that many of us, myself included get hung up on high graphics settings, and then struggle with stutters when flying low to the ground. Just as you said this eliminates that issue because the scenery looks stunning even a few hundred feet off the ground and anything lower than that where the TLOD gets pretty low. I’m not focused on the terrain anymore anyway, I’m looking at the runway, concentrating on landing with a nice smooth frame rate. Absolutely loving this. Thank you so much for bringing this to our attention! ❤

[@VRFlightSimGuy]

My absolute pleasure 😊

[@TheVRRacer]

So good to see this utility for MSFS. iRacing for sim racing has had a setting to dynamically adjust LOD to hold a particular frame rate for quite sometime. It is going to make flight simming so much smoother for VR. Thanks for letting us know! Cant wait to test it out!

[@chargerboy762]

This is fantastic!!..Can someone tell me how I view the AutoFPS screen in VR. It would be greatly appreciated.

[@darinbrown5576]

Yes! I saw news about this yesterday and downloaded it. A genius, true game changer. Maybe best add on ever for MSFS. Everyone needs to know about this. Asobo should really take note and implement this feature into the sim. Thanks so much for getting the news out Steve

[@VRFlightSimGuy]

My pleasure mate, it really is a game changer

[@neilbirch5410]

Absolutely brill. I have quite an ols setup i7 32Gbram and a 1080ti but after installing this my VR has never been as good.

[@OffiYT]

It's so awesome to see how much vr performance improvements the sim got for some time now, through sim updates (especially with the SU15 Beta) and third party solutions like this one. I'm going to give this mod a shot later this evening, thanks for sharing!

[@mountainflyer2718]

This sounds brilliant - can’t wait to try, thanks for the heads-up 👍

[@VRFlightSimGuy]

No problem 👍

[@CCitis]

Agreed, smooth is king in VR. I didn't notice the settings either. I like this app alot.

[@johncrichton4341]

Will try this now Steve - many thanks for highlighting!

[@VRFlightSimGuy]

Pleasure mate :)

[@Lisa-Azra_Broad]

Need something like this for DCS

[@_Jake.From.Statefarm_]

Came to say the same thing.

[@cyrilgpilot]

They have quad views 😅 we want it in msfs. In msfs 2024? 🤞

[@VRFlightSimGuy]

@@cyrilgpilot Very good point ☝️

[@thomas1988de1]

Wow that’s awesome. I wish one day we’d have a universal implementation built into oculus/steamvr/openxr toolkit for things like resolution scaling or foveated radius. Right now adjusting setting (or watching KZbinr doing it) for vr sims is one of the things which stops me from from using pcvr more often.

[@VRFlightSimGuy]

I totally understand the struggle. We really need more automated systems like this. Cheers!

[@guylarochelle9793]

I discovered the tool a few days ago and I would say that since I mostly fly gliders close to mountains & ridges at relatively low altitude, say between 500-2500 feet AGL, I prefer to set a higher minimum LOD and also disable TLOD Min on Ground/Landing as otherwise, the tool will constantly be adjusting TLOD under 2000, thinking you are in preparation for landing. So now, it only adjusts TLOD based on current vs target FPS. Of course, it's all a matter of what and how you fly, and what kind of hardware you have too! Thanks for the review, as always! MajorDad

[@VRFlightSimGuy]

Great tips cheers mate

[@liazkam]

This is exactly why I follow you Steve for 4 years now 🎉

[@VRFlightSimGuy]

Wow thanks so much for supporting the channel for so long! ❤️

[@giacomoertiani3122]

His videos are one of the major causes of my money spent 😂😂😂

[@VRFlightSimGuy]

@@giacomoertiani3122 My apologies to your wallet lol But rest assured, I only recommend the good stuff 🙂

[@giacomoertiani3122]

@@VRFlightSimGuy i know, thanks 😊

[@Renegadepilot]

It absolutely works 110% X-plane 11 had something like this but it didn't work as well as this.... AMAZING 🤩

[@VRFlightSimGuy]

3JFPS, I remember it well :)

[@ThorNjord]

I've always wondered if it was possible to do 3JFPS in MSFS. Now we know! Awesome!

[@OffiicialSteff]

Probably the best vr addon ever

[@jamessimmons8352]

Thanks for the heads up - will be testing this ASAP.

[@VRFlightSimGuy]

Pleasure James 😁

[@gflo2781]

Great video Steve, had been on the fence about this , and I really think I've my sim tweaked to it's best abilities for my rig, but I'm gonna give this a go and see if it helps in some of those more graphically intensive areas. Keeping in mind my gpu is a bit dated now vs my processor, so I'm sure I'll get some boost!

[@VRFlightSimGuy]

Great to hear you have a good setup, this will only change a couple of settings and when you exit the sim, it puts them back again (LOD and clouds). Cheers and thanks for watching :)

[@cyrilgpilot]

I have to try it asap! Thanks Steve!

[@paulmann8675]

Thanks Steve for this I’ll give it a go tonight thanks for sharing

[@VRFlightSimGuy]

Cheers Paul ☺️

[@goochygoochoutdoors.1913]

outstanding App. nice one Lad, great vid.

[@christianleukel8163]

it's just incredible... Thx Steve

[@VRFlightSimGuy]

My pleasure 😌

[@SweViver]

This is really awesome!

[@VRFlightSimGuy]

Hey buddy great to see you here 😊

[@SweViver]

@@VRFlightSimGuyHey Steve! Im here for almost every video u post haha, but I usually stay quiet 😉 Great content as usual!

[@VRFlightSimGuy]

@@SweViver I'm honoured mate thankyou so much!

[@mark_lhr3]

Will try this. Thanks. Just bear in mind folks that VR looks nothing like these recorded clips.

[@cuttheloop]

nope

[@VRFlightSimGuy]

It does in the Pimax Crystal 👍

[@TDChannelKSP]

Huh, very interesting utility indeed. I'm surprised it's able to change the settings so fluidly on the fly, this sounds useful for any VR user.

[@darinbrown5576]

It is even smart enough to automatically save your separate settings for VR vs monitor if people play both.

[@reboot5598]

Just flew Heathrow to London city in 787 locked at 35 fps and was BUTTER SMOOTH !

Yesterday, I had an interesting experience. Started up MSFS but it never was able to load due to some Xbox Live connection issues or whatever. Resulting in MSFS asking me to put in the game disc...sigh. So, quit out of MSFS and started the Xbox app to make sure I was logged on. Once successfully logged on, I started MSFS again and this time it successfully loaded. Once I was finished setting up for the flight which I always do in pancake mode, I put on my Varjo Aero and switched to VR. I immediately noticed how something just wasn't right. I got a very erratic movement when moving my head/view in the cockpit and at first, I couldn't figure out what was causing it. Since nothing changed on my system since last flight when everything was fine. Then I realized what has happened and the fix was ever so easy...when I had to quit MSFS the first time due to the connection issue, AutoFPS closed automatically with MSFS and I didn't think of this. Meaning when I started MSFS the second time, AutoFPS was not running. When I realized this, I started AutoFPS and moments later after it had some time to establish its connection to MFFS, things were back to normal again with silky smooth movements in every direction when moving my head. This was quite amazing to see actually how much of a difference this awesome tool does for the smoothness of the sim. Even with a beefy PC. Made me appreciate AutoFPS even more and now I know what to look for should it happen again 🙂

[@Ard1400]

It works great.... And its free!!

[@vfosterm]

wow! Can't wait to try this! I notice you are using DX11, do you find the performance better in DX11?

[@VRFlightSimGuy]

Yes, definitely, especially when using TAA

[@alessandromicalizzi7973]

@@VRFlightSimGuy I'm very interested to know why you prefer DX11. I'm using a 4090 and many people says that with it DX12 works better. What do you think?

[@andyydna5330]

Thank you so much Steve😃👍

[@VRFlightSimGuy]

You are very welcome

[@skadvani]

Nice video can you do video on how to set up the auto fps. Thanks

[@British_Dragon-4K-Simulations]

I found a very similar application in a forum somewhere. I think there’s two different versions. The one I tried was made by a retired guy in Australia I believe and he’s constantly updating it still. It looks similar to this but with more options and the option to set different altitudes and two different LOD types. Most of the people in this forum was using this app to keep a steady 30FPS, without screen tearing with three monitor’s.

[@VRFlightSimGuy]

Feel free to share it here :)

[@somewhereelsestudio6342]

@@VRFlightSimGuyI tried to share something about it but it's not showing up. Did you remove it Steve?

[@waltersbg]

​@@somewhereelsestudio6342I believe you can't post links in a KZbin comment. Also, once KZbin has decided that your reply is spam, it will just keep deleting it. You may have to find a way to send Steve the info (maybe via his discord) and have him share it.

[@somewhereelsestudio6342]

@sbgThank you - I'll see if I can get his attention on Discord.

[@British_Dragon-4K-Simulations]

@@VRFlightSimGuy It's called 'DynamicLOD_ResetEdition'

[@richardPalmisano]

OK quick question buddy are you still using the open XR tool kit with this and did you downscale the resolution? What override resolution should I set it to? I also have the Pimax pistol and 4090.

[@MrNeilRoberts]

Hey Steve … Q3 4090 .. still a fan of ASW because if not ASW at 45 fps I don’t get the same butter smooth of ASW … but this app won’t be effective of course because ASW is locking fps and when it drops it’s got to be a big(ish) drop and sustained before LOD adjusted. (Even at 1% deviation). So I use the other app from this dev (DynamicLOD) which is AGL based. Happy flighting ! 😊👍

[@VRFlightSimGuy]

Ooh thanks Neil, do you have a link to that? Cheers

[@4secsharkmr352]

Yep, just works❤

[@PascalQNH2992]

Thank you for this wonderful video! I directly noticed that taking off from a medium big airport is ultra smooth now 😊No microstutters at all! But for example, above 3000 feet my TLOD is still at 50. How to achieve 100 from a certain altitude? I checked the TLOD in the sim settings during the flight above 3000ft.

[@VRFlightSimGuy]

Nice one! I'm still new to this tool and have lots of tweaking to do :)

[@PascalQNH2992]

@@VRFlightSimGuy thank you Steve I’m looking forward to see a more in-depth video about it 😄

[@ResetXPDR]

The reason TLOD would still be at 50 at 3000 ft is because your FPS is lower than the target FPS. You have to set a realistic FPS for it to achieve otherwise it will change nothing.

[@OzzySafa]

Wonder if the stuttering you get when recording would be seen on wireless VR through VD or link cable on Quest..

[@VRFlightSimGuy]

I might try it!

[@MW_1535]

This doesn't seem to play nicely with the Aero when I force 45 FPS in the Varjo base software. I get constant stutters. Maybe something up with my setup.

[@ryanchenoweth5673]

It’s all about the resolution with a smooth frame rate 🤗

[@VRFlightSimGuy]

Exactly

[@freddielaker02]

I've got to see a performance increase in the Meta Pro I use, so hopefully this will be the key.

[@speedspeederspeedest]

Just a question, you are running the pimax locked to half framrate with 90hz right? Are you using smart smoothing as well?

[@danc2353]

Hi, I’m having trouble with flashing square or rectangular shaped artifacts in my pimax crystal, while flying in MSFS . Any idea on how to correct?

[@xjrthirteen]

Agh, it's causing stutters for me, worth a go though, cheers Steve.

[@alexb6225]

Looks like a great tool.. and for free! Will be trying it out for sure. As a suggestion and out of curiosity.. what would happen, if using the expert settings, you kept nudging the minimum TLOD up, would it eventually break whilst trying to lock 45fps? Could this potentially be useful to dial in to a higher TLOD possibly at the expense of cloud quality or vice versa?

[@mokusmisi]

Great video as always! 🙂 Unfortunately, on my system I did not see any improvement: MSFS2020, TAA, Pimax Crystal, I9 12900, RTX4080. It reaches 28 to 32 fps at full resolution in VR. Although it changed the TLOD value, but the cloud remained "High" all the time. I can only get higher fps by setting the resolution in OpenXR Toolkit to below 3500x**** instead of the current 3900x****

[@harrys8600]

So got a crystal a month ago. Was wondering when Steve says native resolution. Is that with the PI tool set at custom 1.0 or on maximum?

[@technikchegger7228]

Thanks for your sharing.

[@VRFlightSimGuy]

Pleasure buddy

[@bbbbbbbibiya2344]

​@@VRFlightSimGuy Hello, first of all thank you for your videos which are very well explained! I tried this little software in VR in particular with the pico 4 and I can tell you that it all depends on the plane you use and also the location! In fact, sometimes it's even worse with this software than without it! Do you have an explanation please? Thank you in advance for your response, have a nice day!

[@SparkySven]

I was posted it on your Discord as first and i did not find the time yet to try it. After your video I will asap. But I'm more focussed and anxious for picking up my new Renault Megane E-Tech Iconic Iconic EV :-)

[@VRFlightSimGuy]

I expect a full report and photos on our discord 😁

[@SparkySven]

@@VRFlightSimGuy I'll put it on my channel maybe haha :-)

[@VRFlightSimGuy]

@@SparkySven Great idea! A full sparky car review!

[@Stonky356]

Really useful video - thanks for doing it. Just two questions. Does the program override settings in the flight sim and does it override the fps limit set in Nvidia control panel?

[@ResetXPDR]

It overrides TLOD and cloud MSFS settings while running, but it saves your original settings when it starts and restores them when it exits. FPS caps are covered in the readme but in a nutshell you need to set your FPS target at least 10% lower than any FPS cap.

[@Stonky356]

Thanks for the reply.

[@Macbrowndog]

The other thing i should mention that using DX12 Frame generation is enabled on the 40 series cards

[@VRFlightSimGuy]

Not for VR unless something has changed?

[@Macbrowndog]

I did wonder if FG worked in VR @@VRFlightSimGuy

[@pumpkineater23]

Do I still force 45fps in the ASW 'spacewarp' setting in the debug tool, or just leave that at 'disabled'?

[@RolandDobbins]

How does one obtain the bolt-on GPS/map display?

[@bro977]

Brilliant!

[@VRFlightSimGuy]

It really is!

[@simondavies9350]

May I point out as an ex hawk engineer you never taxi with the canopy open tut tut 😤 thanks for this though 👍🏻

[@user-zt1er1uj6i]

Can you explain why this is? I've seen other aircraft do this, what's the difference between the hawk and others that can?

[@VRFlightSimGuy]

This has to be the best comment ever, thanks for watching! 😄

[@VRFlightSimGuy]

Tbf I'm sure I've seen the Reds do this before 👀

[@simondavies9350]

@@user-zt1er1uj6i summat to do with MDC clearance, the seat if not having enough clearance when closing canopy can detonate the miniature detonating cord, hence ground crew when closing canopy got under the belly of the aircraft in case of such an event. Which never happened in my 3 years working on them 💥

[@simondavies9350]

@@VRFlightSimGuy may well do it’s years since I worked on em at Valley, never taxied with them open there

[@wayne6181]

Hi all, do you still run open xr toolkit with this and use this as a further enhancement in parallel?

[@VRFlightSimGuy]

Affirmative

[@MrXrazy]

Does anyone else get the error in red "MSFS compatibility test failed - Read Only mode". MSFS original from the store with the latest beta.

[@ResetXPDR]

Try running the app as administrator.

[@MrXrazy]

@PDRSolved. Resetting the graphics options did not work. But I manually reinstalled .Net 7 and ran it as administrator and it works (I don't know which of the 2 things fixed it). Thank you very much for your help.

[@countdavis]

Thanks for the heads up about this add-on. In VR, will this work with OpenXR Tool kit?

[@VRFlightSimGuy]

Yes it will 👍

[@countdavis]

Thank you for your reply and update. I downloaded AutoFPS and tried a VR helicopter flight over NY. Unfortunately, no changes for me. In fact, it gave me micro stutters. The only changes I made to the App, was changing the FPS from 45 to 30. I have a RTX 3090 and the VR Reverb G2. I read the website instructions and the App was working but not giving me the same benefits as others. I have uninstalled it for now 😢

[@VRFlightSimGuy]

@@countdavis You really need to be striving for at least 45fps (with a 90hz refresh rate for example), 30fps is too low

[@countdavis]

@@VRFlightSimGuy Ok thanks. I will reinstall and enter 45FPS into the App and see what happens. Fingers crossed 😬

[@VRFlightSimGuy]

@@countdavis Make sure to tune your system so it can actually reach 45fps first, using a stress test location like London City.

[@alessandromicalizzi7973]

I'm very interested to know why you prefer DX11. I'm using a 4090 and many people says that with it DX12 works better. What do you think?

[@laposimoni]

Soprattutto da quelle accroccate ci si può ispirare👍🏻

[@bertennicoledehouwer-vanwi1373]

Do i still need OpenXR and VDXR running when using AutoFPS?

[@stephansiebertz1870]

What is the recommendation for the Target fps if using motion reprojection and a lock of 30fps ( f.e. with rivatuner)? Curious if this also works flying low and slow in helicopters...

[@cuttheloop]

not so much

[@ResetXPDR]

The app won't work with the target FPS being the same as an FPS cap like MR uses because MSFS needs to go slightly above the target FPS for the app to know to increase TLOD. More details are in the readme.

[@Swedish-VR-Pilot]

Great stuff! Quick question, I have my FPS locked to 1/2 (ie 90:2) within oxr toolkit. Do I need to deactivate this before using the tool?

[@VRFlightSimGuy]

Keep that the same, as this utility will only target that number before adding (or taking away) your LOD and clouds, it won't cap the fps (as far as I'm aware anyway).

[@JDVVV378]

Is this a alternative for Dynamic Lod?

[@1974Topper]

Good Video! Can you plz make a short video with your settings in FS to get 45FPS? For me screenshots are enough :-) I have intel 14900k; 64GIG DDR5 RAM; Nvidia 4090 and with Pimax on 1,00 i must in game set the render quality to 60 Percent to get in London 45 FPS with this tool ..... THX A LOT!!!

[@hueyfoo]

Does it work on AMD 7900xtx gpu? It didn't seem like it did when I tried it.

[@sean.d7171]

Very cool

[@christianstauderer7686]

Can you use it combined with Open XR? Thanks

[@cowboy10uk]

This looks stunning, may I ask your pc specs? Currently rocking a 8900k, 32gb ram and 3090, but VR is just a pipe dream as its just so slow, 15 to 20 if im lucky. Planning a upgrade in a few months, 14900 and 64gb Ram, and a new motherboard due to the chip. Hoping this might finally make it usable

[@VRFlightSimGuy]

Running a Stormforce, 13900k, 4090. Thanks for watching!

[@paulmann8675]

Well I had a go and tbh I didn’t really notice much difference I had a steady 45fps in my g2 anyway with Steve’s sim setup in TAA I’m wondering if it’s because I have 4090 and a 5800x3d with 64gb Only thing that happened to me it turned off photogrammetry 🤬 Not sure if this was the software or a bug in mfs Maybe it works better on lower spec systems

[@VRFlightSimGuy]

Autofps won't turn off photogrammetry Paul, although this solution is really for those who haven't already tuned their system for 45fps. It sounds like you are already good to go without this add-on because you have listened to my videos 😁 So well done for that

[@paulmann8675]

I always listen the the vr master 😁

[@VRFlightSimGuy]

@@paulmann8675 LOL cheers Paul, that did make me chuckle!

[@thehighwayman78]

It's a bit crazy that the sim does not have this functionality natively.

[@VRFlightSimGuy]

Ikr!

[@willbennett1359]

I'm in a growing number of simmers who have the dreaded terrain tiles not loading properly, and all photogrammetry looking melted all over the world.... The sim had become unusable this week.... Never had this before it's so strange and it goes worse with each flight. Lots on the forums now like me

[@cuttheloop]

my buildings look like post apocalyptic melted garbage, 2D or VR. I would love to find a reason or fix for this.

[@mikeelwell6462]

i HAVE DOWNLOADED THIS APP = bUT WHEN I TRY AND RUNEXE FILE NOTHING HAPPENS? (Sorry fro shouting hahah). I hav edownload from anywhere on my app setting (using 64bit windows 11)

[@giacomoertiani3122]

Hi Steve, do you know the difference between this and “dynamic LOD”?

[@somewhereelsestudio6342]

All of them (yes, there are at least 3 now) are based on the same core functionality based on a proof of concept that was posted to GitHub. In fact I have written one of my own. I'll get my option in the wind once I finish the final touches on the UI. But the major difference between this one and the "DynamicLOD" version is that the original was based on AGL only. And not actual performance.

[@somewhereelsestudio6342]

@VRFlightSimGuy, Steve, you mentioned that you ran it at 45 FPS (half native refresh) was that the only way you got smooth performance or were you able to get success at other FPS output?

[@somewhereelsestudio6342]

@VRFlightSimGuy: I can also show you how to stream the output without the stutters -

[@arride4590]

This app works for DCS too?

[@TotRuAv]

I've tried it but this shit just randomly shuts off like so annoying

[@andrewvillegas7747]

is the fps setting you set with SSW on or off?

[@VRFlightSimGuy]

off, but feel free to try it

[@ZockerBudeVR]

Worked with Reprojection if i set it on 120hz with 60fps? Hopefully!

[@VRFlightSimGuy]

Let us know how you get on :)

[@nicholasmarshall3191]

Could this work with iRacing? Need at least 72 fps.

[@jakesm653]

What would you want it to? iRacing already has it built in to the settings under Dynamic LOD.

[@brittanymcguire7996]

Yes, Like it better than 3.7.1 because it is less daunting than 3.7.1 but wish the expert settings also had OLOD Min/Max and the Decrease Clouds could also have a MIN/Max Setting.... Sorry, Medium clouds in VR is just nasty.... I can run Ultra and can accept high but anything less I wish I had the ability to control. OLOD is also important and lacking in 0.4.0 hoping to see it return thus I am keeping 3.7.1.... If you want a no fuss means to assist in 45FPS target which is beyond acceptable for VR, without doubt use this version. For the Quest 2, I do recommend Expert Settings TLOD Minimum 75 and TLOD Maximum 165..... DLSS Ultra Quality (look up how to do it with Nvidia Inspector ass best way to do it with best result) and FOV .85 will also enhance your FPS and visuals....

[@ResetXPDR]

The next version 0.4.1 will have Auto OLOD functionality.

[@brittanymcguire7996]

@@ResetXPDR Thank You for working on this.... The Min/Max on clouds would be awesome to have and separate complete profile(s) with all settings being changed depending on if monitor/vr/other situations.

[@ResetXPDR]

@@brittanymcguire7996I'm trying to keep this app simple. There is a DynamicLOD_ResetEdition mode that provides more flexibility with custom settings.

[@UkDave3856]

I’ll give it a crack Steve 👍

[@VRFlightSimGuy]

Cheers Dave

[@averon3891]

Does somebody tried on 3050?

[@richardPalmisano]

Where do you get the download

[@VRFlightSimGuy]

In my notes

[@richardPalmisano]

thanks buddy@@VRFlightSimGuy

[@salazarbernardo]

Unrelated question: I'm done with my Reverb G2, hopping to get a better quality headset, but I'm not convinced about Bigscreen or Pimax yet... Waiting for a more reliable company to upgrade I think... That said, do you think the Quest 3 would me a nice cost effective upgrade while I wait for a better product? Do you think It wold offer a noticible difference in quality over the G2?

[@VRFlightSimGuy]

While the Quest 3 won't be quite as sharp in the centre, those pancake lenses are fantastic and you will love them, especially coming from the Reverb G2 with its small eye box due to Fresnel lenses. Ideally you need a decent GPU to get the most out of it. But overall, it's a superb headset (once you get a few accessories, which I have made a video about) 👍

[@salazarbernardo]

I run a 3080Ti... Not able to use frame gen unfotunately but I get decent results with the G2. Gonna check your video! Tnx !!! @@VRFlightSimGuy

[@richardPalmisano]

Are you using TAA or DLSS

[@VRFlightSimGuy]

I always use TAA

[@chrisvechrysal]

👍

[@belgeode]

Pen and notepad out. 👀👀👀👀👀👀

[@VRFlightSimGuy]

Just be aware to turn it off when making videos 👍

[@tedats]

Hold on, 45 FPS? That sounds rough for VR. Does it not make you feel ill?

[@VRFlightSimGuy]

Half of your refresh rate FPS is key. So 90hz / 45fps, 120hz / 60hz. This wouldn't work so well in fast paced games, but for flying, it's a good compromise, otherwise you'd need to use motion reprojection.

[@tedats]

@@VRFlightSimGuy I run at 80 but have to stick to super remote locations if I want to keep high resolution lol. I'll try half and see how goes, thanks!

[@ji3200]

Too bad its only for MSFS

[@MeppyMan]

Shame I had to sell my headset.

[@VRFlightSimGuy]

How come?

[@MeppyMan]

@@VRFlightSimGuy needed the cash for vet bills (dogs before VR :) and got in before they announced the discontinuation by MS (it was a G2).

[@VRFlightSimGuy]

@@MeppyMan Massive respect for that. I hope your dog is feeling better 🙏

[@MeppyMan]

@@VRFlightSimGuy thanks, one day I’ll get another one… or just go back to the real thing 🤓

[@mark_lhr3]

TLOD at 50 is really just too low Imo. I cannot see how you can have a nice experience at such a low level.

[@VRFlightSimGuy]

It looks pretty good in this video at pow level don't you think? Later, you can see my TLOD goes up to 170