MSI B550M Pro VDH Wifi USB BIOS Button Flash Guide

[@mikesunboxing]

FIX USB BIOS Flash Button Not Working MSI ASUS ASROCK GIGABYTE kzbin.info/www/bejne/hWmwqIljaNSKsLs MSI B550M Pro VDH Wifi Available from affiliate links: Amazon Local: amzn.to/3Ih7KYf Ebay UK: ebay.us/mmM2F6 Ebay US: ebay.us/cRDuL6 Ebay CA: ebay.us/THBr86 Ebay AUS: ebay.us/Bbeo4t RECOMMENDED USB DRIVE Amazon Local: amzn.to/3v7P0H4 Ebay UK: ebay.us/nRoDca Ebay US: ebay.us/P9yUZs Ebay CA: ebay.us/LlI9lU Ebay AUS: ebay.us/THwmCj

[@dylans4655]

Should I use usb 2.0 or usb 3.0?

[@AlanMarchettiOK]

You literally saved my life! I bought this same mobo and couldn't get it to work, it was showing errors on ez debug led and couldn't even start the bios... After going through the steps and flashing, it booted up my Ryzen 5 5600x. Thank you so much!!!

[@mikesunboxing]

Glad I could help :-)

[@Jetha_mamu]

I was also thinking to buy 5600x then PC parts picker told me it might need a bios update.

[@AlanMarchettiOK]

@@Jetha_mamu it's very simple, just follow the steps and you'll get good results 🙌🏻

[@Jetha_mamu]

@@AlanMarchettiOK I'm not sure bro if I do anything wrong then my motherboard will not boot up 😫

[@AlanMarchettiOK]

@@Jetha_mamu don't be scared. If you follow the steps anything bad could happen.

[@reppost]

7 months later, still helping people... had to do it today for a build I'm doing for my daughter. Thanks!

[@mikesunboxing]

Glad to help hope all is good?

[@reppost]

@@mikesunboxing Yep, went smooth as butter. Did exactly as you suggested, no "I think this should be ok" stuff. Ready to start building next weekend. This isn't my first build but it was my first time needing to flash a bios pre-build.

[@mikesunboxing]

@@reppost awesome glad to hear it

[@yogesh124]

Hii larry please help me I order this same motherboard but seller sends me an old stock motherboard which is not ready for r5 5000g I have some questions please ans 1. Do you done cmos battery removal reset trick 2. Which name is better msi.rom or MSI.ROM because i seen many videos with MSI.ROM

[@benolinquimpo5801]

YOU SAVED MY LIFE! Ironic, I watched this video months before actually needing to follow the procedures in this video but the day has come that it’s handy to me. Moral lesson: NEVER use dragon center to update the BIOS.

[@nithpro1385]

had this same issue, doing a reflash rn...

[@MerrillDragonAge]

Why can't I use dragon centre to update bios?

[@mikesunboxing]

Thanks Mike lol - Can't believe i just had to use this video myself to check which USB port to use 😂😂

[@skinnyfoodie2437]

LMAO

[@metrovalleyeats]

Saying this again for anyone who might still be having trouble. If the flash drive is over 32gb it wont be able to use fat32 HOWEVER there are ways to reformat your usb and that worked for me!

[@carloscortez6024]

Which format did you use, please?

[@kablamoo101]

i didnt know that i needed to do a flashback update to my bios so i was sitting there confused why i had no display, a friend of mine told me to doa flashback but the usb i used was faulty and when you mentioned that in this video, it clicked and now i have visuals!! thank you so much for the help!

[@mikesunboxing]

Kablamoo101 Thanks for the feedback! Please consider sharing the video and information on your social media, it really helps to get the message out there.

[@CarlosAbreu]

"Can you do it with components attached?" MSI B550M Mortar Wifi, 5900x, RAM... Pc fully built: bios flashing worked just fine via usb using the flash bios button, I can confirm.

[@mikesunboxing]

thanks for the comment

[@TheBreezeShoot]

Thank you. This was so clear and it was literally exactly what I needed, even down to the specific motherboard. I bought a Ryzen 7 5700x and this mobo and it needed a bios update to run the 3060 that I was switching onto it. Yo're a lifesaver. Please never take this video down as I will be referring people here.

[@mikesunboxing]

Glad I could help!

[@Amazeman32]

Great guide, first time pc builder here and I wanted to update My bios to support my CPU before everything Else came. first USB I tried didn’t work (it is a crappy 250mb one lol) second one I tried was 4gb and worked like so In the video. Thanks 👍🏻 Will update after my build’s finished

[@mikesunboxing]

Glad it helped! and interested to hear how it all goes

[@Teetseremoonia]

I had a failed bios update and had to flash it from a usb. Worked nicely and I didn't have to remove any components. Thank you!

[@mikesunboxing]

Glad it helped

[@CaptainCharan]

Hey man does that mean even if i already got all parts installed I don't need to remove them to flash the bios right?

[@Teetseremoonia]

I didn't have to. Had all my rams, gpu, cpu, rgb, drives installed

[@apex3669]

@@Teetseremoonia can i khow ur processor bro

[@Teetseremoonia]

Ryzen 9 5950x

[@jayroy9836]

Thanka alot for the detailed instructions, it was really scary process as it's expensive components. You made my day more happy as I'm building my 1st PC on my own.

[@mikesunboxing]

Glad to help. Feel free to join our Discord chat if you need any more help discord.gg/gaeeDPw

[@osmancelikdemir7803]

@@mikesunboxing Hello, I have built my PC about a month ago and it was working properly. However; for the last 2 days I am having black screen crashes especially while gaming or booting the game. To narrow down the possibilities, I have made a clear format and only installed the windows updates, gpu driver and mobo drivers. And also the steam app to make the test for gaming. And unfortunately the black screen crash still goes on. What I have found out is that the PC makes a strange booting sound and sometimes it lives on and sometimes it gives the black screen. It always makes that sound before the crash. I assume the sound comes from the mobo... it is MSI MEG x570 Unify btw. I have tried to perform cpu and gpu load tests and it survived that but booting a game or playin for a couple of minutes is impossible... which was fine just 2 days ago... I need some directions

[@mikesunboxing]

@@osmancelikdemir7803 This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/gaeeDPw

[@txcam5156]

Thank you so much! I'm trying to building my first PC, and this video helped out a ton. The first USB drive I tried didn't work, but after I tried a different one it all updated smoothly. Thank you!

[@mikesunboxing]

Glad I could help!

[@aptincho]

Excelente explicación, compre un Ryzen 5600G y no encendía , segui los paso y anduvo de maravilla. GRACIAS

[@mikesunboxing]

gracias

[@mikesunboxing]

@@holy_divr Bought the board on Amazon - if it has 5000 ready sticker BIOS will not need updating

[@joselandaeta87]

Gracias amigo, justo tenía la duda de comprar la tarjeta porque la quiero conectar con ese mismo procesador.

[@yogesh124]

Hii please help me I order this same motherboard but seller sends me old stock motherboard which is not ready for r5 5000g I have some questions please ans 1. Do you done cmos battery removal reset trick 2. Which name is better msi.rom or MSI.ROM because i seen many videos with MSI.ROM

[@stevehughes5403]

Just bought the Board, I had a Ryzen 5500 no GPU, and the Motherboard powered up but gave blank display. So I had a pretty much a built unit. I disconnected everything but the CPU, and followed your directions. With the CPU installed when I started the Flash there was a loud beep, cpu light was flashing, but the Bios Flash pretty much followed your video from that point. After I put vid card and a stick of ram in and got a Display to get into bios. I then watched your other video that showed how to set up bios, My SATA Drive did not show up in the bios and would not boot to the drive. The default settings had Raid enabled , Hot swap drive enabled and was generally mucked up. So your video helped me get that sorted. A bit of a surprise was the Windows 10 drive booted like normal, and it was installed on a 8 year old ASUS board. So I will let it run and smoke test it for a day or so. See if I can get away without reinstalling Windows. I watched some reviews of Windows 11 and can't say anyone had a given a good reason to install it. Thank you very much for the two Videos.

[@mikesunboxing]

Glad the videos helped steve

[@nicolarre]

It worked. Many thanks. Btw I did it with the processor and 1 ram stick on the motherboard and appears to not be an issue on this particular motherboard. It also did not do the long flash at the end, it simply restarted the PC

[@mikesunboxing]

awesome glad to hear a success story

[@yogesh124]

Hii Nicolas I order this same motherboard but seller sends me old stock motherboard which is not ready for r5 5000g I have some questions please ans 1. Do you done cmos battery removal reset trick 2. Which name is better msi.rom or MSI.ROM because i seen many videos with MSI.ROM

[@yogesh124]

Please help me

[@nicolarre]

@@yogesh124 I don't remember but I probably did do the cmos reset since I tried following this video to the letter. I also used "msi.rom"

[@mayukhdas007]

​@@nicolarreIs removing the CMOS battery compulsory?

[@THELASTWORKINGTOILETOFINDIA]

I used an external HDD instead of an USB and it worked. Thank you Mike.

[@mikesunboxing]

great username

[@THELASTWORKINGTOILETOFINDIA]

@@mikesunboxing Thank you. Everyone likes my username, with the exception of Indian bots that number in millions/billions on youtube. 🤭

[@nithpro1385]

@@THELASTWORKINGTOILETOFINDIA what does ur username even mean 💀

[@THELASTWORKINGTOILETOFINDIA]

Do you know basic English?@@nithpro1385

[@AwkwardlyAwesome94]

Absolutely love your videos man, they really helps at 4:30 am when I'm pulling my hair out on why things won't work

[@mikesunboxing]

glad it helps and hope everything is working now?

[@domenicopucci1648]

Thanks a lot, just updated this card a few hours ago and all went fine, really useful. i was expecting it wont work since my psu only has the 4 pins thing instead of 8 for the cpu_power but it works great so far

[@mikesunboxing]

Great to hear!

[@Van-kl1in]

Here after 3 years. Thanks, man

[@mikesunboxing]

thanks for watching

[@uglybob7505]

Since the video "Dont Flash Your Bios" I think this is THE most asked question subject going by your Discord lol. Just wait till AM5 comes ........ Great video for those who DO need flash their BIOS, it helped Pauls Hardware previously so Im sure it'll help others too, thanks for taking the time Mike :-)

[@mikesunboxing]

yes always worth weighing up the pros and cons of flashing, if it ain't broke don't fix it

[@leexgx]

Recant vulnerabilitys in 2024 require bios update (sinkhole witch allows you to rootkit your AMD CPU > SMM and LogoFAIL witch can hijack the boot logo to run code) make sure you update your AMD chipset driver first (from AMD website, not motherboard maker) before updating the bios I just got this possibly broken B550M PRO-VDH (only paid £15 for it) so hoping it is actually working or needs bios update (I have my old 1800x cpu I can thow in it) if it doesn't work it's only £15

[@thetestthumi]

Thank you for your help, very well explained

[@mikesunboxing]

Glad it was helpful!

[@Rogue1337.]

Hi, nice video but I have a question regarding the battery removal. More specifically, is it mandatory to remove the CMOS battery or not? And after having removed it, should I put it back or not?

[@mikesunboxing]

it isn't always necessary only if you think there is a potential of the settings in the BIOS / CMOS being bad or wrong

[@Rogue1337.]

@@mikesunboxing Alright thank you! 👍

[@mikesunboxing]

@@Rogue1337. No problem :-)

[@jasonbrown6604]

Great Video. Best takeaways were 1) where bios flash button was. 2) power connectors, and which usb to use. 3)time and LED lights. Great video, very informational!

[@mikesunboxing]

Glad it helped

[@jasonbrown6604]

@@mikesunboxing actually everything seemed to work but now when I've installed all my components and turned it on for the first time the CPU LED stays on. Has that ever happened to you?

[@mikesunboxing]

This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels@@jasonbrown6604

[@XMwashere]

​​@@mikesunboxinghello, sir Can i use a gen 1 3.2 usb in the 2.0 port?

[@waldo1359]

Will this guide help with all msi motherboards with a flash button? Thanks Mike

[@prathmeshpatil6425]

Yupp

[@mikesunboxing]

yes it will

[@AreJay5721]

Finished my first college semester and ordered this board to come on friday and i'll upgrade my PC. Can't wait to try this!

[@disabledfalafel]

Same here :D

[@estebanolivares6205]

Did you tried it?

[@AreJay5721]

@@estebanolivares6205 Yeah, works pretty well, im running a Ryzen 5 5600x along with a 6700xt, however I didn't need to flash my bios, i just put in the cpu and it booted up

[@bobkaye1540]

Mike thanks for the clear to understand video, as it feels more than daunting, I now know the best board for my build and feel reasonably confident to attempt the job Thankyou.

[@mikesunboxing]

Great to hear! any problems or need a little extra help feel free you to get hold of me or one of the experts on the discord chat

[@JahonCross]

This is my first time building a gaming pc, so this is a big help since I'm picking up this motherboard

[@Boosher_]

think i might get one pre flashed just to reduce pain

[@alex_jorge]

Just wanted to say thanks for your video - it really saved my hide because this mobo crashed during the BIOS flash. I flashed with the 240320 7C95v2K (renamed msi.rom of course) and I haven't had a reboot during Win10 install, so this is a HUGE improvement.

[@mikesunboxing]

Excellent glad it worked out for you

[@santawarrior9]

Hey, I appreciate that you're still answering questions two years later. I have a quick question. I assembled the pc, but the bios button flashes once when I press it and it stays on when holding it. Nothing else happens afterwards. I tried removing the RAM already, but that hasn't helped. I'm trying to upgrade my BIOS to v28

[@mikesunboxing]

sounds like either a short somewhere or the USB drive can't be read, try another one if you can and triple check it is the right BIOS and the drive is formatted correctly

[@NARUTON11]

Me paso lo mismo

[@ethanjames3449]

What does a solid light mean

[@trozopominosl2351]

​@@NARUTON11lo solucionaste?

[@RubyTheBelarusianDog]

Had the same problem just about now - solid red led light with no progress whatsoever. Fixed it by using different USB stick

[@jdortonjanice]

Two years later, this video is again found and such a wonderful help!!!

[@mikesunboxing]

glad to help

[@EmilBBechGrip]

I'm guessing it's the same procedure for the msi b550-a pro

[@mikesunboxing]

yes just a different BIOS file

[@anishsattaram3793]

i love you dawg, i was about to return my whole $600 setup if i didn't come across this video

[@mikesunboxing]

thanks 🔥

[@glatzkowski8677]

Thank you very much. I used the Version without WIFI. In my case, i could not do the update with installed components. I think the default BIOS does not support my CPU (5800X). But without CPU it works perfectly.

[@mikesunboxing]

thanks for watching

[@aikimike]

thanks bro video was a life saver need to know info could not get my setup to post!!!!!! No I will be able to.

[@mikesunboxing]

Glad I could help

[@unkleredd]

Ive build my PC with this board, and a rysen 5. aswell as a 1660 gtx gpu. I have a blank monitor on boot up and VGA light on the motherboard. Everything turns on like my LED but nothing else. I am wondering if i need to flash my BIOS? I have windows on flash drive but it just doesnt do anything. sunk alot into this rig.

[@mikesunboxing]

you don't say which ryzen 5 you have, but if it is 5000 series then yes most likely

[@unkleredd]

@@mikesunboxing 3800

[@luisangelgonzalez3755]

@@unkleredd could you fix it? The same happened to me

[@joefox3001]

I bought this mother with a Ryzen 7 3700x and it did not give video, it was stuck on the EZ BOOT led. I downloaded the last bios and updated according to the video, the red light was flashing for more than 5 minutes, and wualaaaa, it worked !!! Thank you very much for sharing this solution!

[@mikesunboxing]

Thanks for sharing and glad it worked out for you in the end

[@wildlifesnapper1]

I reckon the rule of thumb here with BIOS Flashing and other stuff is not to do anything unless you absolutely have to !!

[@mikesunboxing]

yes if it ain't broken don't fix it

[@wildlifesnapper1]

@@mikesunboxing Absolutely :-)

[@Fungorrr]

Just bought this board and want to format it for my new ryzen 5600x although i'm not entirely sure if it needs it or not. just dont wanna risk hurting anything. this video was perfect, i came here due to not knowing which usb port to try due to the instructions being shoddy. thanks so much sir.

[@NoahLangford]

did this all work for you?

[@NoahLangford]

trying to figure it out my self

[@lewisking2560]

You’re my hero right now! Saving amateurs like me!

[@mikesunboxing]

glad to help

[@MeBloxboy305]

Thanks for this vidro, what a lifesaver... PSA: If the red light blinks a couple of times and then holds solid red, try using a different USB drive, worked for me

[@mikesunboxing]

Great tip!

[@Chrishuff1]

Didn't work for me

[@sunjay9318]

It works, i got my r5 5600x attached and it was easy as shown in your video, no Problems

[@mikesunboxing]

glad to help, please like and share if you can

[@stinglxrd6555]

i am dealing with mine currently hope it works

[@N1colas112]

This ist a very Good video. I've been looking for a helpful video for a long time and this Video saved my Life. Thx

[@mikesunboxing]

Glad it helped

[@jeffharris727]

Thank you! I bought a Codex barebones unit that has this mobo in it from the place that sounds like a rain forest and I'm waiting for a Ryzen 7 5700G, in the meantime I thought I'd get a jump on updating the BIOS and I was having some issues. I don't have all the components I need to test, but I think I am all squared away thanks to you. Thank you for taking the time to make this video!

[@mikesunboxing]

Glad I could help!

[@jolereplica]

I am planning to buy the first PC in a couple of months, and I was looking for tutorials about updating the BIOS on this specific motherboard, which I am also going to buy, because for it to be compatible with the Ryzen 5 5600 the BIOS must be updated if it isn't already. Thank you very much, imma keep this in my liked playlist!

[@lucreciamartinez2101]

Thank God and you man!!! It works! I was almost crying but I reset the usb through cmd like you did, them copy the same bios firmware and works. Thank you very much again.

[@mikesunboxing]

You are welcome!

[@OldGodot]

You saved my son's life! Although it was a fault at my part and I didn't connect the 4-Pin, dumb me!

[@DJSlyTT]

This video helped me out in a big way. Thanks for this. Was wondering how to do it properly.

[@mikesunboxing]

Glad it helped!

[@mohit678]

Just did the all the steps, thanks a lot. It’s my first build, to add or to may ask the motherboard made some sound as well, when it completes and CPU light turns off and on. Idk maybe I was noticing too much lol.

[@mikesunboxing]

Glad I could help

[@ElCapi_MD]

Bro, I have been five hours trying to upgrade the BIOS, without results since I watch your video, you're a crack

[@mikesunboxing]

Glad to hear that

[@facumunoz9478]

Im from argentina, and the only thing I want to say is thank you, because you have helped me a lot

[@mikesunboxing]

Happy to help :-)

[@yogesh124]

Hii Facu please help me I order this same motherboard but seller sends me old stock motherboard which is not ready for r5 5000g I have some questions please ans 1. Do you done cmos battery removal reset trick 2. Which name is better msi.rom or MSI.ROM because i seen many videos with MSI.ROM

[@facumunoz9478]

@@yogesh124 hi yogesh! I dont remember very well becouse i did it a year ago, but i remember that i did exactly the steps that he said in the video. I hope that can help you

[@Hidden_Hunger]

What a relief thank you sir.!! Finally.. 🙌

[@mikesunboxing]

Glad it helped

[@Idealmyowncards]

Thanks this worked for me. I flashed with the RAM/CPU/M.2 connected only thing not connected was the GPU.

[@rogergilmour8805]

Subscribed as soon as I saw this video come up and it's working a charm (R5 5600 CPU is installed in my instance, not affecting the process). Once it's done and the CPU is in, do I just put a GPU in and hook it up to a monitor, and wait or is there another step?

[@mikesunboxing]

after the flash just carry on and build as normal

[@timcollins9800]

Good video as usual ; Mike .My question is can i get a 5 2600x on the board you are using`?Or does this only work with CPU.s that are supported ?My one is not. supported on the board.I have seen in forums of people getting the cpu working with the board.I liked your review of it.

[@mikesunboxing]

It should do most b550 boards will accept 2600 2700 etc

[@DecemberFarms]

Thank you for this video. I had read how to and saw another video, but your video reassured me and gave me some peace of mind about doing it.

[@mikesunboxing]

yes it isn't as scary if you have the knowledge on how the process works and what to watch out for

[@ruohos]

Getting this mobo and the ryzen 5 5600x next month. Good to know I don't have to stress this, seems fairly easy. I'll be back :D

[@mikesunboxing]

hope it all goes well

[@orion1983uk]

Thanks for uploading this video. Had to do this yesterday so the board (which I think still had it's original BIOS) would accept a 5600G processor.

[@mikesunboxing]

Glad we could help

[@ProtectUrTech]

THANKS FOR THE KNOWLEDGE... Worked like a charm...

[@mikesunboxing]

glad it helped

[@lrstudio3221]

Thank you, Mike. A really very helpful video!

[@mikesunboxing]

LR Studio Thanks for the feedback! Please consider sharing the video and information on your social media, it really helps to get the message out there.

[@tomadams6769]

Thanks Mike

[@Denzy604]

Finally an easy to understand video thanks 🙏

[@mikesunboxing]

Glad it was helpful!

[@Denzy604]

@@mikesunboxing just bought the parts to my first desktop/ future gaming pc so i will be coming back to this video! Check it out if you’d like ca.pcpartpicker.com/list/yhcPZZ

[@Denzy604]

@@mikesunboxing it was a success thank you! 🙏

[@mikesunboxing]

@@Denzy604 awesome glad to hear it

[@yogesh124]

Hii denzy please help me I order this same motherboard but seller sends me old stock motherboard which is not ready for r5 5000g I have some questions please ans 1. Do you done cmos battery removal reset trick 2. Which name is better msi.rom or MSI.ROM because i seen many videos with MSI.ROM

[@ko87]

U save my life ❤i also have b550m pro and i got my 5600x with this motherboard and don't open my case😂

[@jacato1077]

mUCHAS GRACIAS POR TU VIDEO ME AYUDO DEMASIADO YA QUE COMPRE LA MISMA PLACA Y LO BUENO ES QUE VI TU VIDEO ANTES DE INSTALAR TODO Y LA VERDAD TODO SALIO DE MARAVILLA SIN PROBLEMAS SALUDOS DESDE MEXICO.

[@mikesunboxing]

Gracias

[@bongkem2723]

Exactly what i need right now, thanks a lot man !!!

[@mikesunboxing]

Glad we could help!

[@andrewggx]

Tbh I did this with all the components attached and without removing the cmos battery and clearing cmos and it worked

[@mikesunboxing]

Thanks for the info :-)

[@gregoryhernandez1660]

Buenas amigo. gracias pro el video, sabes si la MSI MAG B550M Bazooka tambien se puede actualizar por USB?

[@mikesunboxing]

sí, la bazooka tiene un botón de flash USB para que pueda usar ese método sin una CPU instalada que funcione

[@BrakenYT]

Ok for those that are doing it now, and i saw some comments that you could even do this with all the components installed, dont do that, take them all out including the new cpu, and then do it just with cpu and 24 pin connectors connected then it’ll work, i am saying this because i had done it like i said above :))

[@mikesunboxing]

thanks for the heads up

[@BrakenYT]

@@mikesunboxing although i have a question, i did the update just like you in the vid but there was only the red light on and after i put it back together like cou ram gpu and everything else it turns on for a split second and then instant off and it wont start only if i pull the psu cable out and then back in but it does the same

[@mikesunboxing]

This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels@@BrakenYT

[@alldevicesinformatica5647]

Excellent! YOU save my day. Thanks from Argentina!!

[@mikesunboxing]

You're welcome!

[@johnnytavares6458]

I should use the latest bios version over the one you chose here right?

[@mikesunboxing]

yes that is right

[@mvee8089]

Wait, when do you install the battery back? Before or after flashing?

[@mikesunboxing]

after or before

[@Tainted79]

Thx a bunch. Building a new rig with this mb and a 5600x.

[@mikesunboxing]

Hope it goes well for you :-)

[@steelofcrom]

go through process 9 minutes and a solid red light. Had some other files on thumb drive maybe thats it.

[@mikesunboxing]

could be? look for the flashing led to change speeds that is the difference between reading and writing

[@TechSway]

Nice video Mike! Also enjoyed the PDU video earlier, keep up the good work!

[@mikesunboxing]

Thanks! Will do!

[@das_evoli]

Thank you for this great and straightforward guide. Will this be the same on the B550-A Pro?

[@mikesunboxing]

yes pretty much identical

[@proterotype]

Same question, thanks

[@yogesh124]

Hii Mike Its worked🙏🙏🤗 thank you But i get weird scenario here My Power supply was dead/faulty during bios flash I setup the motherboard same step as this video then i press the bios button then red light start to light up But i noticed fan of the power supply not spinning but red light is still blinking so i left the setup running not touches anything, after that procedure completed i assembled my PC but its not started, that time i assumed that my Power supply is faulty so i bring my pc to an PC store were technician says my power supply is faulty, everytime its ON for a second then its stops outputting power So i requested replacement for power supply in amazon Not its working with new power supply I don't know how its worked but i am happy🤗🤗 I checked the bios version its same as i download(current letest version) Also my motherboard says its ready for ""3rd gen ryzen ready" not mention 5000 ready, thats why i flashed letest bios

[@7MZ287]

Actually it's mentioned in the manual which usb port is for the bios backflash. idk why you recommanded to just guess and use 2.0. ASUS has 3.2 usb as bios flash

[@univrhse]

Hey Mike, I know this vid is pretty old but I have a couple questions about my first build. I’m choosing this board and a R5 5500 non X. 1. Is it an absolute must I have to flash bios to get my CPU working on this MOBO? 2. After this process is done, Do I need to let the MOBO cool down before I add other parts or how do I go about building after the process? Thanks.

[@mikesunboxing]

most likely new stock will be flashed already, and there is no need to let it cool down

[@univrhse]

@@mikesunboxing so one last question and thank you, but with the 5000 sticker would you recommend I just build my pc like normal or should I flash bios to latest just to be very sure?

[@mikesunboxing]

@@univrhse Flip a coin - entirely up to you!

[@univrhse]

@@mikesunboxing I flashed bios like u did and everything went perfect. Thank u for ur help mike. Very appreciated

[@mikesunboxing]

@@univrhse No problem, and glad it went well 🙂

[@ChitoWorld]

Wich bios is the most stable for 5600g? Should I clear the cmos settings if I add gpu later on? Is the new beta bios good?

[@mikesunboxing]

The latest one probably is best

[@djcentauri]

Do I have to take the cmos battery out and short it if I’m using the motherboard brand new?

[@mikesunboxing]

No need really if you are sure it is brand new

[@TheGymLad]

Would you recommend doing this with a brand new motherboard if i want to pair it with a Ryzen 5 5600, or only do it in case it doesnt boot?

[@mikesunboxing]

if the board has a ryzen 5000 series ready sticker on it you should be fine, but i would also recommend installing the newest bios at some point for security and performance patches

[@edwardlawns]

Awesome channel, thank you so much for your work, it is really helpful!

[@mikesunboxing]

You're very welcome!

[@185Ping]

Awesome Video! same mobo with r7 5700x. Does your build run at 3600mhz? I tried it but it crashes after enabling XMP. I can only run it at 3200mhz. I followed removing the battery and tapping the CMOS switch to reset the bios.

[@mikesunboxing]

yeah and also ran at 4000mhz, generally down to the RAM and the CPU memory controller

[@185Ping]

7C95v2E is this the latest bios version? when I tried to update after reseting the bios. the pc will not run when set I it to xmp.

[@mastermemer8351]

You need to do this before installing Ryzen 5 5600 processor?

[@mikesunboxing]

probably but depends when the board was made

[@sirdemon2733]

Danke, mit USB 2.0 hat es funktioniert.

[@mikesunboxing]

thanks for watching and commenting

[@LONGTRANGBILL]

Good morning across the pond. I have the msi mag B550 Tomahawk and a r5 3600 so I have not updated the bios. Like you advised.. It works well so no need to update.. at least that is how I took it. Peace

[@mikesunboxing]

yep no need to update with the 3600

[@wiggum1]

Thank you for the great video!

[@mikesunboxing]

Our pleasure! Hope it helped :-)

[@kwukpi989]

Very detailed instructions. I just built my 1st pc with all new components. I downloaded the most recent bio file and performed the bios flashback following this video. I proceeded to build the pc then I attempted to post, but the boot light on the ez debug led came on solid. I removed the components and battery, minus cpu, and reset the cmos because on partsbuilder says its compatible vith an older version 7C95v2A but i got the same resuult. Any recommendations?

[@mikesunboxing]

check the EPS power cable is firmly inserted both ends if a modular PSU is used

[@kwukpi989]

@@mikesunboxing it is seated on the motherboard and a non modular psu

[@kwukpi989]

@@mikesunboxing it was something as simple as using the HDMI connector as opposed to the D-port connector

[@mikesunboxing]

@@kwukpi989 Glad you got it figured out 🙂

[@PaulBakewell]

Great video, thanks Mike.

[@mikesunboxing]

Glad you enjoyed it

[@otakuarabs1468]

شكراً جزيلاً 🧡 Thanks 🧡

[@mikesunboxing]

Otaku Arabs Thanks for the feedback! Please consider sharing the video and information on your social media, it really helps to get the message out there.

[@CBSZ11]

would this motherboard if purchased now work with the ryzen 5 5600 out the box? and is there any risk in following this process without knowing what if the bios version may indeed be updated enough to be compatible?

[@mikesunboxing]

hard to tell but as long as it hasn't been sat a warehouse shelf for ages you should be okay

[@jorgeluizscastro]

I'm planning to update this mobo just to support the ryzen 5700x (the processor is not in my house yet), but I didn't even take the mobo out of the box. I really need to remove the battery or can I update the bios without doing that? And thanks for the video, it's very helpful!!!

[@mikesunboxing]

leave the battery it is okay

[@jorgeluizscastro]

@@mikesunboxing ok, I won't touch the battery! Thanks again 👍

[@gustavogonzalezmonroy9993]

el vídeo que estaba buscando!, muchísimas gracias.

[@mikesunboxing]

thanks for watching

[@gustavogonzalezmonroy9993]

Una pregunta,e recomiendas descargar la versión más reciente o la misma versión que muestras en el vídeo?

[@wfgpumpkinboi4614]

Question, Should I do this to the motherboard before installing a Ryzen 5 5600g onto the motherboard (This is gonna be my first build)

[@mikesunboxing]

yes do it first if you can

[@ibohasan8823]

Hey, I just did the exact same steps as shown in the video and luckily got the same results. However after pulling out the usb stick and successfully installing the newest driver for my motherboard (b550 pro vdh wifi) i installed the cpu and gpu and connected all the fans and pressed the power button expecting to go to the bios setting but it didn’t. The monitor shows me “no signal” message and the cpu led on the top right corner is on im not sure on what i did wrong or what i can do. Can you please help me🙏🏼

[@mikesunboxing]

This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels

[@SoyChambi]

do i need to update the bios if im going with a 3600 amd ryzen 5??? Nice video really helpfull

[@mikesunboxing]

no that will work straight out of the box

[@outlawfett3530]

Thank you Mike! Really appreciate it.

[@mikesunboxing]

You bet!

[@dayronfr6887]

@@mikesunboxing I have this same board, when I turn on the flash button it blinks 6 or 7 times and then it stays red and does not turn off or blink, I have tried 4 usb ,, 2.0 ,,, 3.0 ... could you help me pls,thanks

[@mikesunboxing]

This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/gaeeDPw

[@mikesunboxing]

This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/gaeeDPw@@dayronfr6887

[@eepeemi]

Hello when choosing which bios update to download do you Just download the most recent one?

[@mikesunboxing]

yes

[@icarovinciaqui1900]

Thank you friend, you're a friend!

[@mikesunboxing]

Thank you too