MUFFLER DELETE! E320CDI *V6 NOISE*

Hi guys! Sorry its been a while but im back and this is the first mod for the daily! Just wanted to make it sound abit more exciting and this was a nice easy mod! Hope you all enjoy the video!
Parts needed
60 degree 2inch bend x2
2m of 2inch pipe
15 degree bends optional
Enjoy!
Dont forget to subscribe and like!

[@bmwe30m38]

Perfect sound love OM642

[@danmaycock9238]

Nice work 👍 You look like Alex Terrible 🤙

[@annunaki13]

Great vid mate and it sounds great, what diameter are those stock exhaust pipes?

[@R118GSiVVC]

Nice work!

[@R118GSiVVC]

@Houseofmods can't wait to see the metro back on the road!

[@benjamindrabik4030]

Hey man! Noticed anything performance-wise? Gear shifts? Fuel economy? Has anything changed other than the sound? Thank you, and thanks for the video!

[@deadliftdux]

Always enjoy your videos mate. I've always wondered - what's it like getting an MOT when u muck about removing back boxes and cats etc ? :)

[@houseofmods]

Thank you bud, when it comes to mot back boxes make no difference to how its tested however cats will be a fail due to emissions but i tend to put the cat back on for mot so i dont have a problem 😁

[@glenister4178]

@@houseofmods diesel doesn't need cat just dpf

[@emcekTech]

@@glenister4178 if you watch the vid you'll see that this car doesn't have a DPF at all. There's an elastic joint where the DPF would normally go ;) UK-spec OM642 W211s didn't have a DPF quite often

[@ScaniaVabis580]

Did you get round to doing that drive by vid please? - in two minds whether to do mine or not. Cheers

[@Rachid-on4xw]

Nice

[@shemknight220]

I like the instrumental behind the video

[@joshjack6127]

Boom!

[@abdullahz4804]

Did this on my buddy's E280 cdi with the same engine but was no difference. Was like the most quiet vaccum cleaner but yours is nice!

[@houseofmods]

Thank you dude!

[@abdullahz4804]

@@houseofmods No problem mate!

[@JKV.]

e280 has no 3.2 v6

[@abdullahz4804]

@@JKV. There is no such thing as a 3.2L V6 both are 3.0L OM642

[@Teo9497]

Bro e280 sounds even better than a e420 if theyre both stock in sound, theyre not quiet mine is stock and im hopefully removing the dpf soon and it sounds nice and loud and has some little pops on idle

[@abelgarcia2068]

included particle filter and catalyst or is it just the two mufflers, my eyesight is bad and I don't see it well in your video, thanks for your time

[@glenister4178]

I have the c320 CDI and have the dpf deleted and back box deleted and it honestly sounds nutty dpf is the noise killer !

[@deniscangollari8297]

Can you upload a video to listen it?

[@glenister4178]

@Denis Cangollari sorry man I have a BMW 435i now straight piped and running 580bhp though lol 😆

[@deniscangollari8297]

@@glenister4178 very nice car

[@deniscangollari8297]

@@glenister4178 did it smoke when you got dpf deleted?

[@staceymurray9644]

I came here for calmness what I found😍

[@MrNolando17]

Hi ya mate! You got plans to do a video of how it sounds on the move from the interior?

[@houseofmods]

Yeah bud this will he coming soon!

[@ScaniaVabis580]

@@houseofmods looking forward to that vid, it will determine as to whether I do mine!

[@mrkring1526]

I don't like diesels but this sounds great

[@seewhathappensracinguk2331]

Nice video pal.....Shame I'm North and Your South would have give you a hand....Couldn't hear any cooo on lift off? love a bit of Pidgeon coo on a diesel.....Is there any cooo lol? Loving the videos cant w8 too see where the metros up too :)

[@houseofmods]

Thank you bud! Yeah no cooo just yet, needs abit more work before we get that noise! The metro will be back very soon 😁

[@seewhathappensracinguk2331]

@@houseofmods think you need to do something with the intake aswell as the downpipe too to get the cooo on them. Im now considering a cooper S that could be the drink talking thou lol. looking forward to seeing the metro again Mr house keep up the good work

[@houseofmods]

It actually has a k&n intake fitted by previous owner, once i modify the downpipe i think it will be perfect! Thanks bud appreciate you watching 👊🏻

[@seewhathappensracinguk2331]

@@houseofmods just watched a video on the downpipe mod the original is like the same size as a dpf and quite restrictive by the look of it. anyway he replaced it with a 3" steel piece and welded the sensor holes in can share it if you want to take a look?

[@houseofmods]

I think ive seen it, thats what gave me the idea to remove mine which ill be doing at somepoint! Thank you though bud

[@HowtoRestoreHeadlights]

You’re welcome... just skip to 8:15 for sound. The rest of the video is helpful if you’re gonna DIY. If you only want sound, skip ahead.

[@efimdragutan2238]

Nice job mate, any link to buy the pipes please? Many thanks

[@yoansteffen8599]

hello what and the size of the elbow and the tube please?

[@k3ny0n2]

Still waiting for the follow up video im thinking of doing it to my e280 cdi

[@damian-795]

Your E Class isnt the one that rust`s . That was most cars from 1998 - 2002 because they used a different steel grade. Luckily these w211`s are ok apart from surface stuff thats to be expected.

[@juusoikonen8959]

good old rusty w210

[@abdullahz4804]

Don't believe that w211 doesn't rust because it does. Just the plastic panels hide all the rust lol

[@abdullahz4804]

@@juusoikonen8959 Good old rusty brain

[@AK47UMERKHAN]

Its a must do mod on these. I did the same to mine and would definitely recommend it.

[@mikededeaux4915]

did u see any fuel economy changes?

[@AK47UMERKHAN]

@mikededeaux4915 yeah initially it was drinking more.... only because I was putting my foot down a lot more to enjoy the sound. After things calmed down and my driving back to normal. I didn't really notice any difference in fuel economy changes.

[@glennfulmer3602]

Hollow out the cat and you’ll love it even more! Night and day difference between just the muffler delete and the cat hollowed with muffler delete

[@houseofmods]

I did that! It sounded eppic

[@BenutzerDeinVater777.77]

V6 is way better than old inline 6 320cdi

[@houseofmods]

Most definetly!

[@denizuysal9188]

Agree

[@willemhaifetz-chen1588]

But not more reliable - OMV 648 for the win.

[@denizuysal9188]

@@willemhaifetz-chen1588 This is the truth tooo

[@rsauno85]

Are you on crack ! Cdi way better and faster

[@rogelio111992]

What year is your v6 cdi? I'm looking to replacing my 09 v6 cdi/bluetec with a pre dpf v6 ecu.

[@houseofmods]

2006

[@madeinthehell1622]

Hello friend, I want to do the same job, what is the diameter of the pipe? I have the same vehicle

[@onur-canfiliz7467]

What wheels there 19inch?

[@trollmato]

those wheels really suit the car! what wheels are they?

[@houseofmods]

I believe they are romac 19” alloys and yeah they do look good!

[@juhoheikkila4299]

Are you doing anymore exhaust mods? (x-pipe or fully straight pipe)

[@houseofmods]

I have done more bits to it, i will be posting another video soon

[@spijker_]

Nice "welding" 😂

[@houseofmods]

Works dont it??

[@gittejakobsen177]

can the e320 cdi handle short trips to work 7 days a week. like 6 miles to work.

[@em4703]

So long you take it out in the weekend for a 30 minute drive on a 80-90kmph trip and downshift in gear to keep rpm 2000-2400, you'll get 300k km out of the factory dpf. If you're only driving it to work and don't drive long distance at least twice a month, get a small engine petrol car or a cheapo electric.

[@88kwthomas]

how do you think one would go using a 75 rather than the 60?

[@houseofmods]

Im sorry i dont quite understand?

[@88kwthomas]

@@houseofmods you mentioned adding a 15 degree bend to centre the 60 degree bend, wouldnt it be logical that a 75 degree bend would centre the pipe?

[@houseofmods]

@@88kwthomas that is possible yes however its not so easy to find 75 degree bends and easier to source 60 and 15s 👍

[@EduardoGusatu]

Can you pass mot without this mod ?

[@tunecars6157]

est ce que la mme chose pour une cls W219 320 CDI ??

[@yovkogidishki5294]

You need X pipe. For better sound.

[@MrTrooper31]

Hi how long was the straight pipe you welded on after the bend?

[@houseofmods]

About half a meter at a guess bud!

[@MrCosmin94]

Needs straight pipe to sound like a V6

[@nikola_stijakovic]

same😅😅

[@madeinthehell1622]

Quiero esas puntas de escape para mi en 280 cdi año 2005,esas ovaladas quendan geniales

[@W204...AM6]

What do you think about buying e350 as a first car at 17 in the uk

[@houseofmods]

If the insurance lets you then yes go for it!

[@mohamedyasinarakkal5130]

Wait didn’t the e320cdi had an inline 6

[@houseofmods]

Nope mine was a v6 as it was on the cross over to facelift

[@ScaniaVabis580]

The straight 6 w211 was late 2002 - early 2006, the V6 then from early 06 to the end.

[@chickenchaser3213]

How does this have the v6 when that engine was only used in the facelift w211's?

[@houseofmods]

They did about 6 months of the preface v6 with the 7g transmission 😁

[@chickenchaser3213]

@@houseofmods Never knew that learnt something new there, I had the facelift with the v6 om642 I was always under the impression all pre facelifts had the inline 6 so that's a very unique car you got there sir lol

[@houseofmods]

@@chickenchaser3213 it is a rare beast! Great car though!

[@chickenchaser3213]

@@houseofmods Yeah a hell of a lot of car for the money, I been in an Audi for the last 2 years but I just bought another Mercedes as there awesome I went for the e350 bluetec amg sport saloon had to get that v6 diesel torque back in my life.

[@houseofmods]

Oh yes! Very good value for money and the e350 is great with a stage 1 map on it!

[@xMDGxSNiPERzZ]

Is this legal as in will it pass an MOT like this?

[@houseofmods]

Yes will pass mot no problems!

[@xMDGxSNiPERzZ]

@@houseofmods even emissions test?

[@ionut0071]

@@xMDGxSNiPERzZ they are just to tone it down.. it doesn’t affect emissions

[@xMDGxSNiPERzZ]

OK thanks 👍🏼

[@itemsearches5202]

Bro Is your car diesel or gas

[@houseofmods]

Diesel bro

[@brunoricardoabarraca240]

V6 or 6L?

[@ScaniaVabis580]

V

[@fuadayvazov6642]

there is nothing changed

[@JPEight]

Probably shouldn't be telling the world that you want to take the cat off...

[@houseofmods]

I wont be making a video of it so no one will know whether its been done or not 🙃

[@muhamedneimarlija2523]

I have w211 6 cylinder inline without muffler and they have better sound ...

[@abpodcasts5372]

Whats the best kit to get to make the e220d sound like a svr or amg c63

[@GoogleUser-mx5oe]

Bruh Ahhahahahahahhahah u wanna make a 4 cylinder car sound like 8 cylinder good luck 🤦

[@antoniocarrasco1802]

Un 6 cil siempre va a arrojar buen sonido más.con un buen escape

[@danielmulligan5571]

What are these things like to run

[@ScaniaVabis580]

VERY expensive, lucky if they'll do low 30's in mpg on motorway. They eat tyres like I've not known before and anything needing doing on the engine - £££ in labour. Common issues with these can be ball joints - about 200 per pair for genuine ones (factor part's just don't last) swirl flap motor can get destroyed by oil leak from turbo and the swirl flap linkages are all plastic. Big job to get at those plus whilst that deep you might as well do the common oil cooler seals as they tend to leak (if the original/ early orange seal's). I love mine though, I wouldn't be without it.

[@houseofmods]

Mine averaged 44mpg and never had any reliability issues, depends if you get one with good service history etc

[@ScaniaVabis580]

@@houseofmods I'm hoping to get around 40mpg soon - the swirl flaps on the left bank were shut which was causing all sorts of issues. I haven't driven since we put it back together though. Mines got fsh and apart from tyres and fuel consumption it's been absolutely faultless in fairness but it's now at the mileage (170) where thing's are starting to fail.

[@statisticsspeakforitself4205]

So is it mot legal ???

[@houseofmods]

Yes this has no effect on mot 👍

[@statisticsspeakforitself4205]

@@houseofmods thank you its in my bucket list now 👍🏻🙏🏼

[@MotoPassionFr]

It s L6 or V6 Engine

[@ScaniaVabis580]

V