Mullet El Camino Build Episode 21!! Contortionist Welding and Painting!

[@justshaggy2320]

The reference to VGG wasn't lost on anyone. Thanks Kevin.

[@NatetheGR8PC]

Before I even had my headphones on I could see the hand motion and knew lol.

[@dmaxdan]

had me dying right off the bat lmao VGG is awesome.

[@robertperry6501]

Was gonna make that comment but you beat me to it

[@osumbuckeyenut]

That reference was great! Well played sir!

[@didtheyexpectustotreatthem574]

i'll be dipped if i did not stop right now and look for a VGG...

[@corzahazard444]

I have no problem with the time lapses, we still get to see the work and you can focus on the job

[@pikehunter23750]

Especially time lapse pressure washer porn. I could watch that all day.

[@brandonsearle990]

I agree corey

[@YoungBoysAdventures]

I second the time lapse I quit enjoy them and the great tunes !!!!!! Keep up the amazing work Kevin !!!!!!!!

[@sylvaingroulx4407]

We’re gonna tssss and tsssss and trrrsssssss tssssrrrrrr 😂😂😂 nice intro

[@doubleT84]

Sound effects are on point, as expected.

[@sylvaingroulx4407]

@@doubleT84 exactly I mean eh must have practice a lots to be on point like that 😂

[@aarolecklin8627]

I think, paintgun had some issues at the end 😄

[@theltcrowe9000]

Moses Sandals !!

[@irav4u]

Well I'll be dipped- it sounds like you need to adjust the pressure and fan on the pppsssssstt

[@auralxtc]

Maaaaaan, if I ever have a couple hundred thousand extra dollars burning a hole in my pocket, I'm tossing it KSR's way for a rocket like this! Really appreciate Kevin and his team's extreme attention to detail!

[@Bziiit.]

Cage work is insane. The only thing safer than Mullet is basically a tank.

[@KalLanPIDT]

Mullet is safer on a race track than a tank is on a battlefield =P

[@Matty.Hill_87]

A volvo is pretty safe man 🤔😂

[@ArKritz84]

I can see this car getting shredded in a crash, and the cage with 'ol Cleeter in it just continuing down the track to take the win, him walking out when it finally comes to a stop.

[@gullreefclub]

@@ArKritz84 Drag Racer’s never want to think or have other people think that their shiny Hot Rod will ever get so much as a scratch on it, basically such thoughts are considered bad juju. The only time they want to think about how good their cage is only after bad things happen and they walk away but until that happens they want to think that skill, ability, and superb reaction time combined with grace under pressure will save their car and them from harm (along with a little help from the “Big Man” upstairs.)

[@jaredthompson8188]

Much rather be in this thing crashing at 160+ than a tank lol

[@philipschrantz8402]

The craftsmanship here is next level. This is a Birdcage ElCamino. It’s almost a shame that the body work covers up all that work...

[@SloppyMechanics]

Kevin I appreciate you an the time you take to make the video's

[@vetteZ06000]

He’s the goal/pipe dream for anyone in sloppy mechanics!

[@LizzyB123]

I get the feeling Kevin would data log his morning poops if he could find the sensors. Gotta love it.

[@fubar1217]

So he can adjust his milk to cornflake ratio? lol

[@Poizdrc]

Comment of the century!

[@seanthompson6720]

stand on a scale before and after

[@bmorg7244]

there's a toilet that can do that...

[@chrisnicholson1786]

Diet VS ALL YOU CAN EAT..❤

[@lukaszlewicki5838]

Awesome impresionation of Derek from vice grip garage 😂

[@bradpeterson7572]

For the record I like the time lapse footage. Cool to see your girl friend willing to jump in a give you a hand. Hopefully you've had alittle time to recharge Kevin....hang in there!

[@mikebrown1408]

Love the vicegrip garage reference

[@johnpaice8481]

Wow Kevin you put your heart and soul into everything u do , your amazing get some rest buddy .....

[@eriklarson9137]

Man you can tell Kev is a high end fabricator. Listen to all the different sounding spray patterns he can throw! Poor ol Derek only has the one tssss.

[@tonyconstantino7177]

Kevin keep the Time lapse is there great maybe get like a 20,000 mA battery pack make a little box to go around it to put a go pro mount on top and maybe threads on the bottom of the box that’s screw into a tripod stand or a magnet on the bottom might help keep the battery’s from dying. The attention to detail you’re doing on mullet is amazing I can’t wait to see the finished product.

[@sirforsa]

-"It's weird when you hear your skin sizzle." Truer words have never been spoken.

[@alreed2434]

When it sounds like bacon = ok. When it smells like bacon = not so much.

[@sirforsa]

@@alreed2434 lol

[@remcovanvliet3018]

I'm by no means an expert, but I think if you're tig starts sounding like bacon, you're doing something horribly wrong... 🤔

[@chrisnicholson1786]

Maybe like rice crispys snap crackle pop👀🤔

[@V8VRUte]

@@alreed2434 Correct, hearing it is one thing, and I hope I never do again, because smelling it is a whole new level of NOPE!

[@quickdeuce]

As always Kev, your work is IMPECKABLE!

[@remcovanvliet3018]

"... my girlfriend came in to help strip the old paint off the cage so we could prep it for the new paint.." Brother, if that ain't a keeper, right there, I don't what is!

[@KSRPerformanceFabrication]

For sure!!

[@michaelwynne4346]

@@KSRPerformanceFabrication And she's good looking to, lucky guy.

[@pikehunter23750]

Yup, brother needs to fabricate a ring on that finger. Stat!

[@berndneukirchen3401]

Thanks for your amazing work on Mullet Kevin..... cant wait to see low 7`s from this monster...... greetings from Germany.... The pandemic makes us crazy here, your videos are the best way to come down....

[@douglasabbott2448]

Was not expecting a VGG reference 🤣👌 love it. You're killing it with these videos Kevin 🤘🤘 well done

[@reesehardy2897]

Kevin is the friggen best

[@Matt_Vanepps]

Love the VGG reference, I don’t know. Brain would have melted if we also got a cainted the page BoostedBoiz reference too.

[@jamesrice7287]

I love the time lapse, so long as the music volume is kept at a lower decibel level than the voice decibel. You've been doing pretty good on that point. Don't want to wake up the babies in the other room.

[@bmfrandomness1565]

I love seeing the crossover references on these videos. VGG and KSR are a couple of my favorite channels. You're both such humble and genuine guys. And both beyond skilled!!

[@runejonassen3893]

I could see a collab between VCG, KSR, and Bad Obsession Motorsport.

[@IceBergGeo]

@@runejonassen3893 VCG? Naw, Vince does power tools better than cars, I'm sure... ;)

[@runejonassen3893]

@@IceBergGeo Darn... Got it wrong... DANG IT!

[@IceBergGeo]

@@runejonassen3893 I knew what you meant... But, maybe you talk with Vince too much?

[@zukikiller]

Derek is the man, love that guy

[@tbw21007]

I was like “ooh a KSR video” and then it started and I was like “ no wait it’s a VGG video?” Lol ...No it’s a KSR video. Does old Cleet know that Kevin let Derek tsss on his cage? Worlds are colliding. Great video content.That intro would make ToT proud😀.

[@562LBLegend]

Love to see it. Drilling vent holes. Kevin is the first fabricator I've seen do it on KZbin. Most just burn in pieces willy nilly. Boss Ross at it again

[@plark7323]

Woke up to Kevin making wizard sounds. Gonna be a magical day. Have a blessed day y'all.

[@MoDawdy]

thats VGG spray paint sounds...

[@rabid_1]

Wait till you hear him make the engine sounds when the audio gets lost. It's better than actual engine noise.

[@redthorn66]

You are doing a great job Kevin! Content is Awesome!

[@brushitoff503]

Ha ha love the intro, A little flavour of Vice Grip Garage thrown in. Freakin love it! Cheers from Down Under!

[@TheSteve1175]

No time lapse is good, or great. There is no one with less patients than me, I like to see things getting done. Your common sense is true and straight. Stay where you're at.

[@olmstead25]

Kevin: here's all the sensors so you know exactly what's going on. Cleet: doesnt look at the data he has and fails to notice he is down a cylinder for who knows how long.....

[@kjah06]

Lol yep

[@jasonm9264]

That was a facepalm moment for sure. Who doesn’t check their rockers periodically when you’re pushing that hard.

[@coupalr1]

@@jasonm9264 the type of guys that don’t check their oil.

[@traugdor]

@@coupalr1 Cleet doesn't check his oil, he just changes it.

[@scottterwiel]

Seriously though. How many 7sec passes on 7 cylinders. He felt the power drop so they just turned it up more😅

[@dannotwalruslarkin9324]

The proper way to paint the interior cage....is have VGG come in and do it. Hes the man for the job.

[@bailey-bobthorton1950]

Kevin’s attention to detail is impressive to watch. I was wondering how he was going to get the torch between the cage and the top of the cab, but somehow he did it. A master craftsman at work...

[@gscott2299]

Hes a true master watching him in the shop, he makes it look so easy. #winwithksr #soccermom #lawndart #blackpearlracetruck #poolboy #slimshady #dirtydime

[@michaelmcclure8673]

It's called a crazy amout of stick out and bas azz gas lense cup. I know a couple guys that can use mirrors and weld tubing.🤔

[@charlesdoe4572]

Your reference to Vice Grip Garage was almost spot on and the fact that a perfectionist like you pay tribute to a close enough for who it’s for kinda guy is awesome.

[@davidbeers5949]

Nice Cainted Page Kevin...

[@charlesbryan6402]

Hey Kevin Just wanted to say thank you It’s got to be tough filming all day and then editing for another 3-4 hours Also Thank you for bringing us along for the ride and showing us all the bells and whistles God Bless Hell Yeah Brother

[@The_Cat_Authority]

LOVE THE NOD TO VGG!!! didnt even need sound on to pick up on it. the hand was loud enough lmao

[@fakelewsea]

Loved the intro snippet + VGG reference haha

[@advorsky1]

Ouchhhhhhhhhhhhhhhh!!!! I hope ol’ Cleet realizes how much safer he is now that you’ve beefed up that cage! Whether he goes 8’s, 7’s or 6’s!!! Kevin, sir you are a Master Fabricator/Race Car Builder! Your work is absolutely OUTSTANDING IN A WORLD OF ITS OWN!

[@anthonyestevez118]

I like the time lapse vids personally. Fun to watch. Great stuff Kev! Thanks for sharing! P.S. VGG is in my home state of Minnesota!

[@joeldanaher676]

VGG and KSR collaboration that would be awesome 👌 👏

[@irav4u]

Kevin tuned Independence

[@haulnxr]

@@irav4u I thought Jeremy did?

[@irav4u]

@@haulnxr there was a scene in one of the dozen different Cleetus and cars/ Freedom 500 videos I have watched where Kevin and Derrick are sitting in Independence right on the other side of the chain link fence from where they had Mullet set up at the KSR tent. Kevin is dialing it in.

[@haulnxr]

@@irav4u nice!! If you check out Derek’s Instagram he posed a picture on 4/2 of Jeremy tuning independence on the dyno

[@KSRPerformanceFabrication]

I went over it and found some glitch causing issues, then dialed her in some more.

[@gerrymilidantri6457]

Beautiful work Kevin. and your imitation of Derek is spot on !

[@benvuillemot2810]

Anyone else think a collabe between KSR and VGG where Kevin goes and helps Derek would be KZbin gold?

[@STVNJNSN]

I love your time-lapses Kevin *thumbs up*

[@JKDDarthSniper]

that Vice Grip Garage comment had me smiling for like ten minutes. lol

[@BreadManNoWheat]

Kevin is a beast!

[@davefroman4700]

Nice impression of Derrick there Kevin ;)

[@redneckmechanic8094]

Derek sure does know how to use a rattle can pretty damn good! Looking great, your attention to detail is out of this world. This is gonna be one hell of a car

[@THatChevyguy91]

Kevin been hanging with Derrick hahaha that was good

[@BlackSheepG8]

Kevin, I have a tremendous amount of respect for you and your work ethic. At the end of that video, you can tell your exhausted my friend. Then I go to leave a comment. Dude you acknowledge every comment, your too much LOL. I really look up to you sir, have a blessed day!

[@caseywinningham3000]

The Vise grip garage montage was EPIC!!!! LOL

[@Dixby_floppy]

Dont care if its real time or time lapsed. Watching you work is like viewing a art gallery. Everything is a masterpiece

[@rusticoaf]

A guy wasn’t thinking about having a cold snack or two for lunch, but I’ll be dipped

[@KurtisBarnes]

Loved the VGG reference!! Looks like you took a hot welding rod to the face! You do such amazing and precise work, I have never seen a builder, who is so precise, and perfect when building, the little details, like the plugs in the fire wall, just how you clean up and hide everything, that is perfection! So many little details that you show, that are usually missed, you are the best car builder i have ever seen, if i ever hit the lottery, you are building my car!

[@kennieholt2860]

VGG is an amazing channel glad to see you two talk about each other in your videos

[@MegaMonkeyman101]

KSR gonna have Mullet looking like a race car and a show car.

[@brandonshowe]

Working on a Sunday!! That’s all fine but don’t forget to take some time for yourself man. We can all wait for the videos 👍🏻

[@smokinschannel5840]

Vgg making a cameo on ksr gotta love it!

[@pilbaraman1755]

Have not missed one episode from when "KSR is back on KZbin" .. your attention to detail is bloody infectious mate, love it!!

[@yhtengineering86]

Just the intro is perfect.. Derek is like America's mechanic buddy

[@peterjdo]

😂 don’t forget to check the lightening whirler 👍

[@Jeffmackens]

I appreciate your attention to detail Kevin, congratulations on your win!!

[@jasonpatterson947]

Love the VGG impersonation. You nailed it !!!

[@nicholasgolde8687]

Derek has definitely rubbed some of his magic off on the Cleetus Crew lol

[@collinwhitney4467]

Aw, I was kinda hoping it was gonna be red white and blue at the end. Still looks good though!

[@gat6186]

Cleeter gave ya some praise on the hovercraft video. I agree, love the build guys. Looking forward to seeing some 6sec Mullett passes.

[@hammerswrenches2174]

Oh my freaking goodness! A guy was cracking up at the VGG impression! Tsssssssst!

[@mayorwrenchmcgnome]

You've done Derek proud! That calls for a cold snack.

[@sparkyp3715]

would love to see a head to head with this and Mike Finnegan's caddy he's just got done with, as always Kev loving the videos an work, keep going an enjoy buddy

[@Damicske]

Lol "and now the weather with Uncle Cleet" on dragweek :)

[@Austensales1]

We use those connectors on fighter jets and I know exactly what that satisfying twist and click feels like😂 can’t wait to see the first pass, great job building this!

[@jakep5121]

We had a lady "Twist" one of these onto a fire-bottle with a pair of channel locks.... Needless to say, the AT's had to go out and change a cannon plug. Ironic part was that we were hero's before she showed up, we got that fire-bottle replaced so fast that it wouldn't have delayed the flight. All she had to do was plug it in because me as a "Framer" (AM) wasn't "qualified" :)

[@MB-mx7vz]

We use them on traffic signal control equipment too. Seems like overkill when they are used on fighter jets too

[@Austensales1]

@@jakep5121 I was an AT few 4 years, I was the only one in my shop that did wire repair so that would have been me out there fixing it😂

[@Austensales1]

@@MB-mx7vz they arnt overkill, they are necessary for quick removal and replacement of parts, if everything was hard wired it would not be efficient and when your on a Deployment you need to trouble shoot jets quickly

[@Poizdrc]

As a former airframer there was no better feeling than cutting a cannon plug harness when avi pulls some bullshit. Hahahaha Oops, planes down.. avi up

[@razel1986]

Kevin, you're so insanely thorough in the way you work! Love watching such a pro at the top of his game.

[@ryanhoffmann9341]

I don't mind the time lapses when we end up with top level work like you and your team produce! Keep it up guys!

[@TimothyJ]

When the tornado hits that car is where I wanna be. Damn nice job!

[@Doogie_Causey]

Id Love 2 See K S R & V G G Collaborate On A Video. Kevin U & Your Employees Are Badass & Do Amazing Work

[@jamesrice7287]

Derek is proud of that reference I'm sure. He's a hoot

[@drifty3314]

Can we just talk about how Kevins rattle can work looks better than some legit painters.... Looking good, cant wait to see this elco run!

[@painedinks]

Hell yeah! Nice shout out to Derek and vice grip garage! One the funniest dudes ever, I love that channel! It's cool to see when a couple of my favorite channels support each other like that. You guys are killing it as always!

[@telecasteroil]

GREAT VIDEO, and a tip of the hat to VGG Now take Mullet cruising into town !

[@iowacummins24]

Mullet has turned into a 2000 hp ekg machine with as many sensors as it has. Loving it

[@bigworm1440]

the VGG intro was on point i like it

[@drewfausett5388]

love seeing Derek's hand gestures show up EVERYWHERE

[@driveitlikeyastoleit55]

Love how you channelled Derek at the beginning of the video!

[@sirmonkey1985]

people that fabricate cages do not get enough credit, the amount of work involved in doing all that is insane.

[@johnhoskins1786]

That cage looks so much stronger . We got to keep the baby Giraffe Safe in its cradle.

[@blackvenges]

You know it is true love when she is willing to strip paint for you. Personally I like the time-lapse portions.

[@liener14]

The hand motion was absolutely perfect too!

[@frunction]

Literal blood, sweat, and tears, working on the day of the Lord. Good thing no one got stuck in the roll cage!

[@matthewmcclintock5806]

Lmao the VGG reenactment was spot on bro lol I do the same shit all the time now since I've started watching his channel

[@markbickel3149]

Nice to see a welder not a grinder. Nice welds

[@MountainMcCumbee]

Alright, been a fan for a while. Actually just realized I hadn’t subscribed yet. Well then you did the old MiniSoTa paint job I was like, wait a minute, I searched and found I wasn’t but was like, yep I need to subscribe now. I love it when good guys know about and collaborate with each other. Glad you helped him with independence as well.

[@fordman89lx4]

You the man Kevin. Keep up the good work. 👍

[@steelersfan9165]

Nailed it on the VGG impression!!! 😎

[@brx3649]

The fabrication on the roll cage was beautiful enough to clear coat. Outstanding!

[@jnic69]

“This thing will be a rolling weather station going down the road” Ultimate dad move, racecar that can also tell you the weather.

[@danieledwards1081]

I guess for the perfect finish on the cage you could always powdercoat the whole car 🤣😁 Looks like top shelf quality work as always Kevin

[@d26-i4b]

The moment we have all been waiting for... another mullet video!!

[@adamspencer2515]

The man knows his client These connectors make removing the engine easy.lmao That and extra long tabs to slide it out.

[@daltonmckee4788]

Never thought about shuffle dancing to a KSR video before this BANGER haha

[@MRCtouring]

Awesome work once again. Cletus is going to need more drivers with Leroy, Ruby, Mullet, Dale Truck and James back in the Nova unless Cletus and James run double duties and you keep driving the Dale Truck Kevin.