⭐ Multi-Objective Optimization of Composites using ACP

֍ In this tutorial, the step by step procedure of multi-objective optimization of composites by ANSYS composite PrepPost (ACP) and the mechanical module is described. Finding the best method for arranging the thickness and angles of composite layers is always challenging and can be time-consuming. With the help of ANSYS composite PrepPost, optimization methods, and an ANSYS specialist, this procedure can be done much easier and faster than experimental methods.
In this tutorial we are going to learn about defining parameters and sensors for the optimization process, coupling ANSYS Composite PrepPost with Mechanical, and defining Failure Criteria, and reviewing the results. A cylindrical geometry will be considered with outside uniform pressure which can be a simplified model of a sub-marine shell.
▼ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ ▼
For more ANSYS tutorials and projects please subscribe to our channel and follow us on
→ www.idesignbest.com
→ www.idesignbest.com/facebook
→ www.idesignbest.com/twitter
→ www.idesignbest.com/instagram
▼ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ ▼
The music of this video:
♫ “After You” by Dan Lebowitz is free licensed ♫
♫ “Night Snow” by Asher Fulero is free licensed ♫
♫ “Hickory Hollow” by Dan Lebowitz is free licensed ♫
♫ “Sunshine on Sand” by Unicorn Heads is free licensed ♫
♫ “Sweet Release” by Dan Lebowitz is free licensed ♫
♫ “Family Album” by Magic In The Other is free licensed ♫
▼ ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄ ▼
This Video is:
● Authored and Recorded by Ali Mokhtari
● Edited and reviewed by Mehdi Moradi

[@farmad100]

a very good lesson. It is suggested to add commentary rather than plying music in back ground. It will be more attractive for students. Students preferably watch those videos which are supported by commentary

[@iDESIGNBests]

Thanks. Your opinion will be considered.

[@NiborStriker]

Hello, do you know if there is a way to evaluate failure criteria coming from the eighenvalue buckling results in the ACP Post module ?

[@iDESIGNBests]

Hi. Do you mean buckling failure criteria?

[@NiborStriker]

@@iDESIGNBests yep I mean that

[@akashropalekar8643]

I tried this process but the results at static structural gives 0 inverse reverse factor

[@iDESIGNBests]

Hi Probably you have mistake in setting the analysis. repeat it and if the problem exist contact us via provided contact information in idesignbest.com or ansystube.com

[@martonsish]

I do not comprenhend the solution of the optimization. Is it telling you that on mpdelling ply 1 1you should have 5 layers at 0º?

[@iDESIGNBests]

Yes. But in some designs we have a limitation on the number of layers with the same angle next to each other

[@GruhaLakshmiKandruAP]

Hello sir, Can I import .cdb file in ACP(pre)?

[@iDESIGNBests]

Hi. No