multipass welding Mig-Mag ,rarely discussed welding techniques

Hello in this video i will show u how to weld multipasses mig-mag

[@michael_mack]

Good job! We do such a welding on thick meterials with solid wire 1.2 mm wit 10/11m for a minute and with the 30/31 volts. It's different welding. You have to go fast. It's much easier to weld with 0.8mm wire, you have more time for reaction. I wish I could work on such a setup in work. It would be less stressful 😅 Anyway, working on higher settings like we do gives you great looking welds almost flat and perfect when you have an experience. Greetings from Poland!!!

[@migstickwelder1992]

Thank you. Yea we weld lots of big construction,like 50-80 mm thick , and we use only 1,2 mm wire 😏, buth we have problem we dont get clean material , so its hard to get nice welds , buth i do my best all time 😎

[@michael_mack]

@@migstickwelder1992 The unclean meterials are always an issue in the business. That's why we use high energy and thick wire 😀!!!

[@wesleyconklin6874]

Your welder sounds crazy much different than what I'm used to.

[@migstickwelder1992]

becouse its pulse welding and it sound like a bees haha , do u weld with pulse welder?

[@VypaGaming]

Is cursive e technique or another welding technique where u dont stay in the root the whole way through still strong enough for structural welding?

[@KADIC927]

Odlično

[@itsmedamin9794]

Very good job👏

[@migstickwelder1992]

thank you

[@mojamalafarma]

Nice

[@misplacedpawn]

Not bad 👍🏻👍🏻

[@migstickwelder1992]

thank you

[@aureliopelen9548]

Nice weld

[@migstickwelder1992]

thanx mate 😁

[@douwetendam5097]

Did you go to any welding school or course? My welds structural horizontal welds look identical n i was windering if its good enough to pass the tests

[@migstickwelder1992]

for test at least first pass need to be just draging for better penetration in root , and next one u can make some movement 😁

[@ronelopangilinan6991]

@@migstickwelder1992 absolutely right

[@Spiderman20888]

🎉🎉🎉

[@MarquaviousFordham]

Does this help with a tee joint welding test

[@migstickwelder1992]

If u weld for test, first pass cant be welded with movement , just push straight becouse root wont be same all the way

[@Spiderman20888]

😮😮

[@nghinvuinhnghin5157]

What size is your soldering iron and what is the current?

[@migstickwelder1992]

1,2 mm i think it was on 240A

[@nghinvuinhnghin5157]

@@migstickwelder1992 thanhyou

[@rayray6064]

Please help. Wich max thk for single pass (cap) for weld pipe? Any international code or standart?

[@migstickwelder1992]

What thickness mate 😁

[@rayray6064]

3" pipe 5.49 thk. Single or multi pass (cap) reqire? In which standart its mention. Thanks, my best regards to you​@@migstickwelder1992

[@Chou005]

What is the differeence between mig and mag welding?

[@migstickwelder1992]

Mig (metal inert gas) mag (metal active gas)

[@TigMig-zz9sk]

What type of welding machine please?

[@migstickwelder1992]

Its EWM phoenix pulse 400

[@migstickwelder1992]

It cost around 8K buth it have all in Mig-Mag , Electro , ac dc pulse Tig

[@jeremeyd9704]

What wire speed and voltage are you running ?

[@migstickwelder1992]

wire7,6 volts21,8

[@VypaGaming]

​@@migstickwelder1992jesus u welding that thick of metal on them settings?

[@migstickwelder1992]

@@VypaGaming yea thats about 230Amps

[@migstickwelder1992]

@@VypaGaming its not that thick and its preheated

[@pajcarek]

you did notin similar to wat you draw

[@zstang01]

Cap?