Multiplex EasyGlider 4 RR - Model Aviation

[@BigAlNaAlba]

Great "what you need to know" review. Very helpful

[@maxmustermann4847]

Enjoyable comparison! Happy landings and go ahead :-)

[@Garethfrostturkeythroat113]

Hello great video thanks for sharing can I ask what camera do you mount to your glider thank you

[@jaimemacias826]

Very good video, i have a new one second hand, and it has mounted a 40,32 , 920 kv brushless motor with a robbe dynamic E- 11x 6´´ propeller and i feel that with 2s , 2200mah, 20c battery it has enough power to fly well, What do you think about it? The fly weigh is about 1kg, 150g. What is your C.G recomended for this plane ? THANKS FOR YOUR HELP.

[@JPh35]

hello. This is a very nice & detailed presentation. Thks!. I have heard about MPX quality and prices also. Could you give us element of comparison for example with Robbe Arcus II which is a similar frame of glider (wings, weight) ? I have several questions : I guess you placed the Rx in the cockpit just below the 2 servos and on opposite side of the fuselage than ESC. So, in this configuration the LiPo 3S can only be placed at the center of fuselage under the wings ; correct ? A word related to the wings servos connectors on fuselage. I guess you have to be very careful not to pinch the wires between the wing key and the fuselage and not to pull on them when unclipping the wing servo connectors? Finally, when you use the ailerons in "flaperon" is it up or down way ?. Is the servo travel sufficient to ensure a significant reduction (like a "half-butterfly") of the glider's speed during the landing phase? Thanks for reading.

[@wolfgang7513]

Very good informations and nice video.One question: where and how did you fix the camera on the plane? Do you suggest a camera model, that meets the requiries of a modelplaner ? Kind regards, Wolfgang

[@sachidanandbogra6693]

Sir can this do themals any video of easy glider thermaling

[@ggss1176]

nice review

[@eisenschweinchen5354]

Which cam was mountet?

[@thomasedmonds6028]

Thanks for the review! Are the airfoils all the same? It would be nice to have a better penetration model so it can be flown in wind. 9% thick would be good.

[@Weirdflight]

The airfoil appears to be the same between the EG1 and EG4. For whatever it's worth, you can insert either set of wings into either fuselage. Not that those interfaces reflect the airfoil...but it perhaps provides some evidence that the overall shape has not been altered. I measured the airfoil thickness to be about 12%..

[@НуридинНуралиев-ц9т]

skiller

[@GlidersMSL]

Hello, thank you for this video which allows you to approach the glider effectively. I take advantage of this comment to indicate that I am currently making some tutorials on the EasyGlider in order to try to help beginners (sometimes alone) already a little comfortable, to approach aerobatics with this glider and to perfect their driving while feeling more comfortable. Below is the link to this playlist: kzbin.info/www/bejne/Y3XEaYSYlsmJeas

[@НуридинНуралиев-ц9т]

10iz10