Infiniti G20 | Things I hate about my Infiniti G20

What do I hate about my Infiniti g20
Remember to subscribe for more content of my G37s and also my civic (em2) build.
Have a nice day.
Don't forget to subscribe, it's free!!!!!
Ig: www.instagram....
_________________________________________________________________
Song:
NEFFEX - Best of Me
Video Link: • NEFFEX - Best of Me | ...
♫Music By♫
Pryces - Grown
Song - • Video
Pryces - smarturl.it/Pryces
Dj Quads - Spring Feelings (Non-Copyrighted Music)
Soundcloud - / aka-dj-quads
Instagram - / djquads
Twitter - / djquads
NEFFEX - Blow Up [Copyright Free]
Stream on Spotify: open.spotify.c....
Or Soundcloud: / bl .
#infinitig20 #nissanprimera #p11primera

[@TheBoostedg20]

For everybody tryna find parts for the g20 just look for sentra parts (1991-1994 SER)(1995-1997 200sx SER)for engine mods,exterior parts are the hard parts to find

[@MumbleVlogs]

I'm gonna have to screenshot this

[@tramlink8544]

or look for P11 Primera, as Infinity G20 is just a rebadged Nissan P11 Primera

[@shykaliguy33]

@@tramlink8544 true but primera never made it to North America

[@tramlink8544]

@@shykaliguy33 it did, its just called the Infiniti G20 there

[@menace2society00]

​@@tramlink8544 That wasnt his point lol, the whole point was g20 owners looking for parts, since g20's are made for north america, north americans would have a hard time finding a primera for parts over the sentra which was made here....

[@infinitig20sr11]

I love my car I just shift it at red line and it runs amazing always reliable and sounds good

[@christorok1906]

I've not driven an automatic. Mine is a manual. I just got into this car coming from a 2ZZ Toyota MRS (I blew the motor and didn't have time to fix it due to school). This motor actually has some torque. What you have to learn (and what I learned from owning a light car) is, play to the car's strength. 3000 lbs actually isn't high for how many features this car has. Actually the weight is just below 3,000. I did a proper spark plug change to copper ngk plugs. I also purchased some OZ edition lancer wheels. The wheel/tire combo now is 4 lbs lighter per axle than stock. And this is all unsprung weight so the car gets out of its own way a bit better and handles and brakes even better. Part of the problem is that you have those 16 inch wheels with god knows how large of tires. The farther away you push weight away from the center hub, the harder it is for your car to accelerate. Try getting some lighter wheels. Reduce the tire diameter. Trust me, this car is no MR2. However, it does have some strong points. If you play to its strengths, its a really fun car. I'm on track to get into software development. I will keep this car as my daily, but will be swapping another MR2 with a 2GRFE V6. But I'll still enjoy this car, even if it is for a short while.

[@MumbleVlogs]

You ain’t lying I feel you on the wheel diameter, are you going to document your v6 swap Mrs?

[@christorok1906]

I would like to. But its always a bit complicated when I haven't done something before. I could probably document another 2ZZ swap better than a 2GR, since I actually know that motor and trans. But it would be fun. I'd like to take my time with it, so it's possible that I would document it.

[@davidc9332]

I have a 2000 g20t and man do I feel your pain. Hard to find after market mods, body kits, or just parts that I need.

[@MumbleVlogs]

You aint lying a simple intake is like 200 and to find an aftermarket exhaust or header is next to non existent

[@MeynMotorGroup]

lol just like the Acura used to be. Made a lot of noise but didn’t really go anywhere

[@MumbleVlogs]

Lol if you thought your Acura was slow I could only imagine your reaction in this car lol 😂

[@mida8s]

I just got this car after failing to get a 2000 Lexus es300 and even though this car is rare and the Facebook group is still kinda the same with only just part outs I really want this car to shine and yea that 4 speed automatic is so ass I swear I thought I was the only one thinking like "this car feels like its missing a gear like it wants to shift to that missing gear but it doesn't" LMFAOOO

[@gabrielsoria8935]

ive got a manual g20. its nice . but i wish it had more power.. you are right about trying to find mods for this car... its not that common

[@MumbleVlogs]

Nice 👍 I would love to have a manual g20. If you think the manual g20 is slow imagine how I feel with mine being automatic lol have you looked into piecing together a turbo kit?

[@gabrielsoria8935]

Mumble i havent really looked it to it, any recommendations where to start off looking?

[@MumbleVlogs]

I say go ahead and add the g20.net page on Facebook, there’s kits being sold on there at times even with bolt ons your g20 would respond so well since it’s a manual car

[@AF-gv8tw]

Gabriel Soria my friend turbo’d his g20 by himself. his KZbin is “Christian willand”

[@MumbleVlogs]

Oh yeah I watched his channel before and I live his p10 primera

[@statewidesandblastingstate7171]

I love my car. When I need that RPMs up I can downshift and it goes just fine.

[@morganwhitney9717]

I love my 99 Infiniti g20 but hate the cup holder, then power steering and the noise it’s making that I can’t figure out.

[@MumbleVlogs]

Could be a bad pulley? Is it a squeaking noise

[@morganwhitney9717]

My dad thinks it’s a squeaky noise but I think it sounds a little more like a grinding noise. He’s thinking it’s a axle. The front wheel bearing and bushings was replaced 2 weeks ago. I don’t know much about cars but help my dad work on my car. It has 266 k miles

[@MumbleVlogs]

I had a noise but it was with a pulley, have you checked the axles to see if the booths are torn? Mine had bad booths for a while and I never really had any issues

[@morganwhitney9717]

Mumble it was one of the axles and a bad wheel bearing. The bearing was in the hub.

[@bandmarc141]

I had the same axle issue on mine.....went through thousands so frustrating! Finally I traded it in for my Hyundai Equus....but I really miss it. Still liked my G20....had the light green with gold kit on it....

[@MumbleVlogs]

I totally feel you on that, I have dumped quite a bit of money on this car. I’ve enjoyed it but you have to know when to cut you’re loses.

[@bandmarc141]

@@MumbleVlogs So true...it began with some mysterious transmission issue....then down hill from there. Axles was the killer....could not find the right one. I thoroughly enjoyed these when they came out tho. 😎

[@MumbleVlogs]

Yeha bro, after a while of changing and struggling to find parts for this car I lost a bit of interest in it

[@TheAfrothunderr]

First car i bought for $400 at 17 i loved this car. I would have kept it but it came with state fees....

[@MumbleVlogs]

Damn them state fees will get you sometimes

[@JesseRizo]

Lol great pointing out the headlights before someone bugs u about it lol, 4 speed 🤨, time to buy an extra cup holder from autozone lol have u seen those, And I usually never ask the autozone people cuz they don’t really know much Great video bro 😎👍👍👍 left a thumbs up

[@MumbleVlogs]

Lol yeah bro you know how some people are, if I didn’t put that I would of probably gotten a “I hate the foggy headlights” lol Actually I haven’t but I might have to look into it now that you mention it

[@JesseRizo]

Mumble Mumble lol exactly 😂👍, forsure n there pretty cheap $

[@MumbleVlogs]

Jesse Rizo lol now I really need to get them I love cheap stuff haha

[@Lilipwp-z7m]

nissan b13 , b15 suspension parts fit.. I have the jdm version primera... manual transmission.... for a little more top end I suggest setting ignition timing to about 15 -17 degrees

[@MumbleVlogs]

Another good idea I'm gonna have to keep in mind

[@matteste618]

Great video bro. Definitely feel u regarding the cup holder but I’ve seen u can get the Indash din with the cup holder which is what I was gonna do. Mine is also automatic but I was gonna swap it to manual then do a ve swap for more power. I also wanted to go tein coilovers and oem front suspension with energy bushings. Also found front/rear strut tower bars and gonna do a maxima se rear sway bar. Car has real potential as a nice daily. Happy with mine besides the annoyances lol

[@jigsaw4379]

A bro can u send me link to cup holder with in dash

[@midnightbass6596]

2 cup holders in the front if u have the glovebox piece

[@TheScottyp1]

bro I have a 2001, I have headers and a full custom exhaust, hot shot cai (true cai), pulley kit, wires, bunch of poly bushings and crewmember mounts. Also rims and jdm dual headlights. next is coilovers. Don't give up on this car as it verry rewarding driving car. car handles amazingly well. and this car pulls up top, try advancing base timing to 19(not if you running iridium) sorry for bad grammar it's 2 am and I'm drunk lol

[@MumbleVlogs]

All good, in the end I got rid of the car but I am keeping my eyes opened for a manual one this time

[@95streettruck]

Let me see a video does it sound nice add the snap @ dtx.juniortx

[@TheScottyp1]

@@95streettruck i think so... let me figure out how to get good sound and ill let ya see it

[@TheScottyp1]

@@95streettruck i did have to add an extra resonator to get rid of some rasp but now im diggin it

[@95streettruck]

TheScottyp1 do they sound good cause I’m thinking of getting one for free it’s a 2000 this lady doesn’t want her car no more and wants to pass it on

[@Jay-sz5dt]

car looks really good... Old lexus are good choice super comfy ride qulity , easy to fix , super nice interior , quite cabin

[@MumbleVlogs]

Thanks 🙏 so true I remember wanting an is300 or gs400 back in the day. I’m starting to become a fan of the ls400 aswell

[@Jay-sz5dt]

Mumble Ls400 are super comfy haha , one of kid in my school drive gs400 looks cool

[@MumbleVlogs]

Yeah man I like big body cars, the gs400 was a pretty quick car and it probably still is

[@stealthbomb269]

No aftermarket support for a sr20de right......

[@chrishms7448]

Rockauto.com for your parts. They know the differences. Also Infinitipartsusa.com for oem parts. A lot cheaper than autozone. More selection of brand name parts

[@MumbleVlogs]

Thanks for the heads up

[@kl1591]

Thanks a lot for sharing those links. I've been trying to find a shop that ships parts to Brazil for my G20 92 and it is incredibly hard to find

[@johnalterio372]

A few things.. This car was based on the European Nissan Primera (not sentra).. one of the best handling cars in Europe in the time. next, this car should only be considered in the 5 speed sport trim.. its fun, and much better driving experience. The lack of IRS was a an issue... it would get unsettled in bumps while turning. I had a 2002 Sport and I sold it many years ago.. wish I still had it. Not all the CVT/turbo crap out today.

[@parisj0354]

I just bought a 99 g20t a few months ago, hopefully I’ll be able to find everything I want and need..

[@R-A-H_-]

Good luck, parts are expensive and hard to get.

[@RobertsBrainIsGone]

There is a cupholder in the armrest (maybe yours is missing, it's removable). There used to be a direct fit Remus exhaust, but axleback. Oh, and for shifting, you can remove the comfort transistor and it will get close to redline, but you'll get a CEL.

[@MumbleVlogs]

I never knew about the cup holder in the armrest mine is missing it. Oh never knew Remus made an axle back for its. I have heard about removing that resistor do you think that could possibly damage the transmission?

[@RobertsBrainIsGone]

Mumble they say it's no harm because it still will not enter redline, but I've never tried it. I do manual shift the auto occasionally, though... Start out with O/D off in first and go through the gears, then turn O/D back on. But really only in the winter with snow on the ground. I've done it like that for like 12 years in The G.

[@MumbleVlogs]

Interesting might have to try it, just need to do more research in any side affects or harm to the transmission

[@drg0809]

supposedly it causes issues in the long run if you remove the tranny resistor. But that is what I have heard/read, have not done it personally. Regarding the cup holders, it is a pain. I had to mickey mouse the one on the center console. I bought an RV cup holder (the ones that go on the removable tables), hollowed out the stock one and dropped the new one in. Fits a soda can, water bottle, McD's cup without tipping over in turns now. And I do have the one in the center console but can only fit can sodas as you will have to ride with the arm rest up if you put anything else.

[@MumbleVlogs]

I heard that to bro about the transmission when you remove the resistor, that’s not a bad idea I’m going to have to go ahead and check those cup holders out

[@LePedant]

Yeah, the transmission sucks for gas mileage. According to the Torque Pro app, @55MPH I get ~40MPG, @60MPH I get ~36MPG, and @70MPH I get ~30MPG.

[@papi-champoo6033]

It's an SR20 what do you mean you're limited to modifications?

[@MumbleVlogs]

In my opinion finding parts has became hard if youre not aware of where to look. The g20 community has become so small. I was on the g20.net group on facebook and half the time it was nothing but partouts. I liked owning the G20 but after having an issue trying to find and axle and having electrical issues I had to let it go.

[@papi-champoo6033]

@@MumbleVlogs Nissan Pulsar GTI-R parts, pistons and rods from any SR20 are interchangeable. Besides the axel what exactly where you trying to do to it?

[@dramsamooj1]

Bro theres a sr20 in that thing you know how much support this car got you can mod the fuck out of this shit

[@MumbleVlogs]

That’s true, but at the moment it’s hard to stay motivated on modding this car when it is giving me such a huge electrical issue

[@fluffy1826]

Hey so I’m really thinking about picking one of these as my first car, wanted to know any tips or advice like is it a good daily driver? What year is best? Is it reliable? I would mainly use it to just like drive to school/work not planning on making any performance mods.

[@brazen2861]

Dude same! On the first car part. I’m definitely modding mine tho

[@MumbleVlogs]

For it being an everyday car is fine but finding parts for it can be a hassle at times

[@michaelbuczko4967]

Swap the engine to a sr20ve - better hp and better mpg

[@loneoak5066]

What is a LSD transaxle?

[@sicko_nismo3609]

Man I need to get me a daily lol I like this car

[@MumbleVlogs]

Get one bro, sure beats the stress of having your only car break down because you have a backup

[@Kuzikai]

whats your tint percentage?

[@baltazargonzalez2510]

No eating no drinks allowed in car anyways

[@MumbleVlogs]

I like the way you think 👍

[@mikeruiz7985]

Stillen made a front spoiler for this car once. You might have some luck finding one as I see NOS Stillen stuff online from time to time. Greddy made a SP catback for this car, but good luck finding one now. GSpec I believe still custom makes them and they sell a lot of performance parts for SR20 powered cars. You have a great little engine in that car, but you have the wrong transmission.

[@mach1mustangguy992]

It’s cheaper to keep her. It’s a cool lil daily that you don’t see everyday

[@Kpostma100]

isnt it 143 hp? here in europe we have the nissan primera,same car just different easthetics. SR20DE roller rocker,i have the primera gt, it has originaly 150 hp but you can get it easily to about 160 without a sweat, any more than that and u have to realy invest

[@tombouu]

I have Nissan Primera P11 1997 2.0 Sr20De 115 HP 169 Nm

[@danielpatronik8036]

I get 35 mpg on mine with mostly local highway driving

[@Lilipwp-z7m]

also jdm b13 ecu revs to 7200 rpm.... ecu swap will add some more zip

[@MumbleVlogs]

Ill keep this in mind if I ever get another one or maybe a B13 sentra

[@EDUARDOSANCHEZ-df5pt]

Yo know that’s a sr20 under the hood

[@edownn]

Damn man should of watched this video before ordering an axle for my 2002 g20 sport. Didn't realize they had the LSD and I got the axle for the base model 🤦‍♂️

[@MumbleVlogs]

Yea bro, I went through like 5 different ones till I finally found the right one

[@RedXShadow55]

Great video 👍😎

[@MumbleVlogs]

Thanks bro, saw that you got yours back on the road

[@RedXShadow55]

Mumble yeah I'm happy to drive her again 😎

[@MumbleVlogs]

Nice bro, I might start doing a couple of things to mine since it’s a car I rarely see around my area

[@RedXShadow55]

Mumble yeah man you should 😎👍

[@MumbleVlogs]

Yeah bro I just ordered a part that should be getting here soon, and I also found a set of Sentra se-r wheels the 7 spoke ones

[@rlimazd]

Mandrel bend exhaust systems makes a kit for the g20. And u can turbo it, even automatic. Will make it quick and fun.

[@MumbleVlogs]

I need to look into that exhaust system. I was actually going to mention that in the this video but I decided to leave turboing the car for the next video or reason I love the car. I was going to go into details about how you can easily boost the sr20de if you can shop around and find the right parts. I also remember yo telling me about adding a shift kit to the auto transmission a while back. Also in that video I wanted to touch on the amount of swaps that can go into this car.

[@rlimazd]

Mumble that exhaust will run around 500 though, maybe 550

[@MumbleVlogs]

For real? So in a way you think your better of doing something at a muffer shop?

[@rlimazd]

Mumble I'm guessing it will be somewhat cheaper maybe 150 bucks savings maybe 200

[@MumbleVlogs]

That’s true, I’ll have to think about that. I would still need a resonator for it

[@mammeljuice]

hey man could you direct me to a good place to buy spring coils for the struts? or better yet quick struts? my car is bottoming out like a bitch. its 1996 infiniti g20

[@MumbleVlogs]

mamel .juice as far as the springs coils I would say ebay, a junkyard. But in all honesty get on the Facebook g20.net page there is always a lot of cars being part out. As far as struts cheap and fast would probably be rock auto as they are sometimes a lot cheaper than ebay. If you try to find anything locally you may not have good luck at all

[@mammeljuice]

alright cool maybe i'll just stick with the coils i have and switch out the shocks

[@MumbleVlogs]

mamel .juice true, idk if you have looked into the twin coilover system it’s about 400-500

[@stevesmith1216]

Lol kws tdmi d2 there's a lot of suspension sr20det all types of different motors to swap

[@MumbleVlogs]

Thanks for the suspension info

[@Magicstockton]

Very informative

[@MumbleVlogs]

Thanks bro gotta show what’s this chassis lacks when there’s not that much out there

[@BlancOsmooth]

Mi e get up to high way speed and zipzipzoom 80s 90s on da regular 😝

[@BlancOsmooth]

No cup holder⛽

[@stevesmith1216]

P11 and b14 or b13s aint for kids go back to your honda and your auto life lmfao got a have money to play

[@MumbleVlogs]

If you say so...this is just a daily nothing more. Someone’s a Nissan fanboy

[@sanchez12garage]

5th or 6th gen maxima

[@MumbleVlogs]

I had a manual 5.5 gen maxima like 3-4 years ago. I miss that car a lot, it was a lot of fun and a good sleeper

[@jenkinscompchannel282]

I have a 01 g20 I love it and your right there rare

[@CarlosGarcia-bx3rf]

Is it automatic?

[@HurkHogan]

The lack of knowledge kills me

[@rudolphsagnelli9556]

About the Exhaust System www.trubendz.com

[@ryanruesch6345]

I have a 99 g20 and I can’t find a racing seat bracket for the life of me

[@poopymcgee6308]

Corbeau makes P11 specific driver/pass brackets.

[@ryanruesch6345]

@@poopymcgee6308 I actually just bought some lol thanks tho

[@chrishms7448]

I see Texas plates. Let me know if you trade it in.

[@MumbleVlogs]

I was but I may just keep it for a while

[@jrod25221]

Want better performance drop turbo inside her Dawgs

[@madmarlone]

you sound so mad about the cup holder lol. i say sell the g20 to fix the em2 and daily it!!

[@MumbleVlogs]

Lol I am man, you don’t know the struggle of being thirty cuz the car has no useful cup holders lol the em2 will be back 💪

[@javierdominguez3327]

Lakewood are Dallas!

[@donte9730]

3,000 lbs 145hp? No mames!

[@MumbleVlogs]

Exactly what I was thinking lol

[@popesucks69]

Luxury Sentra....😂😂😂😂 Dude, you know NOTHING about this car😂😂😂😂

[@MumbleVlogs]

Then please feel free to educate me??? I’ll be waiting

[@stevesmith1216]

Go get your axle rebuilt

[@MumbleVlogs]

I just got the replaced with the oreilly ones haven’t had any issues so far

[@shogunfong2129]

G35 coupe of 350z

[@MumbleVlogs]

Ived been looking at those lately, but I think I would still got with a g35 sedan. A 350z would be a good choice but I need more room

[@tunein7456]

Get a Spec V Sentra

[@MumbleVlogs]

I would buy all of them are in such bad conditions