Make ANY Headphones LOW-LATENCY Wireless!! | Lekato IEM System

[@niclastname]

I've been wondering for a long time why the only brand I know that does low latency wireless studio headphones is AIAIAI... Especially since we've had low latency wireless audio for mics, instruments, and in ear monitors for a long time. Why tf isn't it super common for studio headphones? Or just headphones in general. Why are the only options basically only wired and bluetooth?!

[@soundahfekz321]

Can confirm that this works well! after trying a few wireless setups and them having poor audio quality and/or unacceptable latency, im not seeing a perceptible difference in Ableton, or when creating on my keyboard or drumming on my Push 2. For my at home setup I've flattened the EQ on a pair of XM5's that I put in ANC mode (i like to create with minimal external noise), then use ATH-M50's when I want to actually mix/master. Perfect combination for me.

[@Official_Zenuh]

yeap..that is the point...Ive already got 28ms latency onmy DAW using a Fantom 7 as well...but Id like to have a bluetooth outout with lower latency...ASIO4ALL I could not find bluetooth option and on roland interface there is none either...alternative is ASIOFLSTUDIO....you play and two minutes later you are able to hear the notes lol.... Ive been also trying to find some binaural rendering adaptor n no sucess..I gather I was beaten up ...I must wait for the tech to improve and lower costs...

[@jibberish00]

Have you compared latency with the aiaiai headphones? Do they sound different? Less/more latency?

[@markmallinder7618]

What I’m looking for is a zero latency wireless setup for a home rehearsal studio. Each musician would be wearing headphones with a headset mic so that we can communicate (or even sing). So the wireless to the needs to be bidirectional. Stereo output to the headphones and mono input from the mic. Does anything like that exist?

[@maraz2215]

It is not low latency. it is 12ms and when using with a wireless jack system it becomes unusable due to latency coming from both wireless systems. 4-5ms can do the job

[@MrCosmicVictory]

(awesome setup with the keyboard/ipad dock!) ive been looking for wireless receivers like this. i have bose headphones and dont want them going to waste since im turned off with bluetooth latency, so this might bring them back to life. good find!

[@thatsfunnyjimmy1351]

Thanks for recommending this product man . I've always Hated having a cord dangling against me . For the short cord I just cut the original headphone wire from the right side to about 3" and cut about 2" from the original plug and soldered them together with heat shrink over each of the 3 wires and a larger heat shrink over that . Quite a pain with the tiny wires . After stripping and before soldering each connection I had to burn each end first with a lighter due to the nylon strands and epoxy coating on the wires . Cleaned with rubbing alcohol before soldering as well . Very low latency and good sound .

[@RECESSIM]

Great video brother! Bought that wireless setup using your link, will help me be more mobile during live streams.

[@Dennis-ws7tv]

actually a good fix for my problem instead of the other vids i watched on YT, thanks!

[@EosKarlsson]

What about low end loss in this set up.? Seems like a lot is lost in the lower frequencies.

[@andrekeller1649]

nice setup... where did you get the yellow cable?

[@JASONWALTZ-in2pb]

Yeah wish you would have answered the comment

[@DaveBeyTV]

It might be a Deity mic cord. Rode has a red one that comes with the rode wireless go

[@BlakeSuperior_Beats]

Very cool solution! Thanks for sharing.

[@lawrencediggs7957]

Thanks. Can headsets with mics be used into an iPad? Does the wifi on the iPad interfere with the signal? I want to use this to create a mix in my iPad and send it to a Behringer XAir.

[@STTLLC]

What about transmitting to Ipods or other native type BT headphones. I have some Status 3ac and want to try to mix on them. Can I just use the transmitter?

[@fadel1254]

Thank you.. u help me 🎉🎉❤❤

[@ApolloMclaren]

Bro pls tell me where you got the aux cable for the headphones I look so stupid rn with the audio technica to aux adapter sticking out the bottom with a thick 6 inch aux chord going from that to the receiver strapped to the side

[@MusicTechnologist]

For sure! It’s one of the cables I had laying around that came with this mic ➡️ amzn.to/3vLUyt0 I had to shave some plastic off around the tip to get it to fit just right, and I zip tied it to the headphones. Hope that helps!

[@ApolloMclaren]

@@MusicTechnologist gotcha thanks dude

[@ApolloMclaren]

What cable is that connecting the headphones to the receiver?

[@ApolloMclaren]

Looks like the myvolts candycord pocket operator cable but with black ends instead of white. Not sure how this could possibly fit into the aux port on audio technica athm50x

[@ApolloMclaren]

I just bought an adapter for the m50x so any aux can connect but i would still really like to know where you found that aux cable! Please

[@Bachelor052]

Great video! That is exactly what i was looking for for so long I already thought about buying cheap wireless headset with 2.4g low latency dongle and dissassemble it's guts to make it (maybe cloud core wireless) But the problem would be a usb interface that i will have to plug into pc or something, which is not as convenient as plugging 3.5mm instead So yeah, thanks a lot!

[@devbot-bm8zt]

I know this is an old video, but what cups did you put on those m50s?

[@natekaplowitz]

Do they still work while being charged? I want to hook this up with my PC and was hoping that I could just leave the transmitter charging through a usb port in my PC

[@epitiger]

I have the same Headphones and the same receiver. How did you attach the receiver to the headphones? With same tape or glue? I really love this setup, so pls reply, thx!

[@phil4573]

Great video, please can you tell me where i can get a yellow cable like your one? also if I only had the receiver, could I connect my source, in this case my metal detector to the receiver and plug a regular pair of headphones into the receiver to achieve no latency? thanks

[@TheHouseOfHouseYT]

Thanks for the review. Can you charge the transmitter while it's transmitting?

[@Berus7777]

Question: I bought the AIAIAI's, and the clamp force was so high that it was an instant "NO" for me. They went back. I saw this, and was very interested. However, how is the sound quality? Is the sound quality equal to that of the AIAIAI? (Assuming you're using an equivalent headphone)?

[@Cluless02]

They sound pretty harsh or so I've heard. What are they ~16ms? That's not ultra low for studio monitoring. What about the HEAVY pro studio phones at 2.3ms latency? Perhaps I've gotten the figures off, please let me know. What is a detectable latency for pro studio monitoring?

[@denzelb5380]

what magnet plate did you use?

[@KLAEYZ]

Hey man, do you think either of these setups would solve the issue I’ve been having with latency while using my Soundcore Q45 Bluetooth headphones with a projector?

[@ThWedum]

When it comes to a second receiver for speakers. Does the receiver work when charging?

[@Official_Zenuh]

thnaks for the video..Ive been strugling to find a low latency gear to use on the main out for Fantom 7...no sucess at all!!

[@mechanicalmonk2020]

How would these fare for high impedance headphones like the Sennheiser HD headphones?

[@milk_bath]

I'm definitely interested in the parts you used to slide the iPad keyboard into the midi controller. Hit me up!

[@verusskolts8191]

try aptx lowlatency, I recently tried it with a bluetooth dac-amp like the fiio btr13 and honestly no latency at all and I can connect many headphones with quite high impedances.

[@TheonlyMrlab]

What is the yellow cable that you have for headphones ?

[@PeterPower1]

hey great video! i am looking for a solution to connect 6 wireless ultra low latency studio headphones to one powered transmitter.. do you know any possible solutions? the lekato system looks good. though can the transmitter work.. while being powered by usb?

[@jibberish00]

How does the latency compare to the aiaiai headphones? I’m definitely looking for less latency than what they offer.

[@kodyamos]

I want to do this with my Massdrop 6XX (sennheiser copycat) headset and goXLR for gaming. Any thoughts?

[@Dweller777]

Checkhov's gun: If you see a gun in a scene in a movie, you'd better use it as a plot device. The same way as if you place the words "LOW LATENCY" in the title of your video, you should probably address that at some point in the video.

[@theonlyegg]

Le - GAHT- Oh... like the musical term.

[@MusicTechnologist]

Nah the brand is actually Lekato, but KZbin auto-corrected my video title to say legato. I just now caught this and fixed it in the video title! Thanks for bringing it to my attention!

[@NeseComedy]

I don't understand why there is nothing with this usecase in mind, could even charge like $100 for it if it's more user friendly, or if it's truly lossless and sub 20ms I wouldn't even mind $150 honestly

[@robertgarvansnyder4665]

Also the AIAIAI TMA2 sounds pretty mid. I own a pair and just end up using my wired headphones cause of the poor sound quality.

[@RobertMurphy-wm3ge]

gotta love UHF. Bluetooth is terrible

[@kdcr23]

Lekato is not true stereo

[@UnafraidCookie]

source?