Must do upgrades for the UDI RC/Pinecone models 1/16 160X cars

[@drewnewcomb2909]

Do you know if they offer metal spurs for these guys?

[@jonathanmc-smith7284]

Cool video. The upgrade tips are cool. 👍👍👍🤘🤘🤘🤘

[@bluewolfrc]

Thank you dude 😁🤘

[@velkrofpv6654]

hey buddy just wondering where you purchased the diff kit from?

[@andrew4403]

So if you like the way it handles now that means you really didn't want a drift truck. Right? Cuz before the upgrades it was a good drift truck. Just asking cuz I'm the same way I have the pinecone model truck that you can't really even use the gyro on it It just fishtails back and forth back and forth back and forth. So now what I'm going to do is what you did with the diffs so it handles a lot better because I already have a nice drift truck it's a MJX hyper go 14301 and the 14302. Good job figuring it out that way I didn't have to. Thanks again for sharing your video.👍

[@gitan1048]

One thing you should upgrade is your annoying music in background

[@bluewolfrc]

I guess you dont like trap beats 🤣Why dont you make me some"better music" for me then? I think its fine considering i made it in about 20 mins 🤣

[@Boycey_UK]

Gaeton your name sounds like an aldis version of Ferrero rocher

[@jonathanmc-smith7284]

It's good to hear what's being said rather than struggling to hear. Nice music choice bro. 👍👍👍 that reminds me I must see if my new servo fits my wltoys . 👍👍👍 Gaeton I just checked out your subs bud Nice 👍👍

[@Nohlily94]

Hahaha ...u kidding 😂

[@michaelramirez4864]

@@Boycey_UK that’s not a roast since Aldi is kicking Costco and other big brands’ ass

[@allthesmolthings]

Hi loved the video could you tell me what sort of servo I need to look for to add to my car it's being shipped so I wanted to get some parts in so I can do the upgrades when it gets here. Thank you for you time.

[@bluewolfrc]

A 1181mg servo is what i used in this video, any upgraded servo for the wltoys 144001 or wpl d12 will also be a direct fit 😁 thanks for watching! 🤘

[@nevTk-oe9ud]

Did ya do the lights bro ? Im looking at doing similar mod as urs . Cheers great vid

[@mikepearce3061]

Was it just the diff cups you replaced or full diffs I've baught his car for my lad and it's uncontrollable like you said nice work 👌

[@bluewolfrc]

full diff swap dude :)

[@justin83--]

do you have a link to the diffs you replaced the originals with and what fluid do you use with the new diffs? thanks in advance.

[@imlee5217]

You should get some oil dampers if you haven’t got them by now and you can fit Tamiya M chassis wheels. to fit the M chassis wheels you need to get some 12mm hex 1/16 adapters they do what it say on the Tin they have a 12mm hex but you can use the much smaller pins you that this car has and you get 4 pins in with the adapters but they are a little thin so I kept the stock pins and used the adapters with them you’ll also need to get the low profile M chassis tires not the normal 60d tires the tamiya part number for the tires you’ll need is 50568 the normal M chassis 60D tires are to tall here’s a link for the adapters to fit the m chassis wheels make sure you get the tamiya racing tires to put on the m chassis wheels the are a bit wider so you need to put a washer or 2 on top of the hex’s so the wheel misses the chassis on the rear the advantages with the m chassis wheels are they are bigger wider and you can put foams in them they are bigger than the stock wheels so you might have to raise the body depending on how stiff your shocks are if you shocks are soft then you’ll definitely have to raise the body I’m going to put a quick vid of the car with the m chassis wheels fitted and if I’ve got time I’ll get a running video www.ebay.co.uk/itm/385555277257?hash=item59c4e2a5c9:g:dx4AAOSwv05kPnnq&amdata=enc%3AAQAIAAABIJHzBnTR8ZMbgN6RXLhYC7YzDdXMwRMy6zxz9TpsCCWUpVxxszGoVBz59O7iK4IARNTDCMLxNe5o%2BAoPuQapSimriNHBrVH%2BPkLptcBVUnIexb8g2A4X5A%2BOfg6OehQvhzkVK0YNBTXmtP5tHhm3ylrO%2FAaMiu5tyv4I2VPVSe%2FJgqli6jtGNHqOvggt4nVaNSmH9I3HOal7x2cfI8X%2F5vtq9MsZ0Ue8UgJDmiC5fBEYgA04DgItA3yW7TB2OcNT2lmEQXGr224YdMEpzY1Mm4Y5ufEJzFBKRaTPS5nKmtKe7ADu9DFeRfff3mubQ9yMMu8IaJ42AeKWAmwA9ecIE6E0TjzS%2BW5gzgNhvxt8Kq1RoNOktmyjC2kWqR4LoI6mxg%3D%3D%7Ctkp%3ABk9SR9yxjcLyYQ

[@bluewolfrc]

Yeah i did all that, got bored of it, and sold it a while ago, not a fan of the smaller cars really, i did a speedrun with mchassis foams and sold it

[@safwanchannel8226]

The remote control still using original?

[@ttucker2073]

Hi. Do you know if the car shells fit on the truck chassis. Thanks

[@bluewolfrc]

they do, youll just need the correct body posts

[@but531]

Someone know how to make it steer more ? The stock steering angle is let's say is ok but how can we make it to steer more.

[@nevTk-oe9ud]

Metal gear servo but ya gotta do new esc and receiver.

[@UrbanLegendRC]

Nice set up

[@contractorgaming9671]

My sg I made it dual esc and dual battery..

[@bluewolfrc]

Nice 🤘

[@Boogie_the_cat]

I think i see the problem: you have a jug of fluid in the background, and it appears the fluid is NOT chocolate milk. I repeat: not chocolate milk. I use full fat choco-milk in my diffs because they're thirsty and vitamin D deficient.

[@marcsangiuliano4273]

Do you think the diffs is what fixed the pull on acceleration, or the combination of servo and diffs? I have a 1/16 doing the same thing. Thanks for any help.

[@bluewolfrc]

Its was the diffs for sure, but running open diffs will make it suck at drifting, open/limited diffs for onroad, locked diffs for drift

[@jamesborek8125]

@@bluewolfrc What are your thoughts on just upgrading the front differential and leaving the rear alone for "better" handling, but still being able to drift about?

[@bluewolfrc]

Not a bad idea at all

[@danielbrettle3269]

Is it hard to change the front and rear difts?

[@bluewolfrc]

Not at all, just a few screws

[@daniel-is6zf]

If it makes you feel any better my outcast v2 I switched to a fly sky g7p great tx rx by the way but as I was able to have alot more sensitivity I noticed at slow it would hook right and at speed it would crab walk right aswell .. never had a chance to sort out why as o absolutely blitzed a ramp and yeh too much hang time could catch it and snapped the chassis... Being that theyre wasn't all to much to adjust Id say a bent a shock or something prior... It happens 😜👍

[@daniel-is6zf]

If anything I'd change it would be a faster rate servo a little stronger motor and gear setup and some better quality tyres as these shred like cheese to a grater 😜👍

[@daniel-is6zf]

Glad you got it sorted mate 😊

[@cruisey9857]

Where can I find those diffs? I’ve been fighting this thing forever, I’m done with it.

[@bluewolfrc]

I just found them on ebay, i searched "sg1603 metal diffs" and these are what i found

[@chazzer666]

Can get them pretty cheap on ali express

[@rccrazy]

Just a little better than stock 🤏🤣 Nah man awesome now🤘

[@bluewolfrc]

🤣🤣 its exactly what i wanted now 😁 just need to order a few sets of wheels 🤣

[@watchthisfilm3710]

@@bluewolfrc what wheels are available, struggling to find a nice set.

[@bluewolfrc]

Ive been using mini touring car foams, you will need to swap to 12mm hexes and trim the arches slightly though

[@FreeMan-JPLK]

👌👌✌✌

[@robinm6100]

good video but dude that background music is super annoying its not a good beat

[@bluewolfrc]

I made the beat on about 15 mins on a 2007 macbook 🤷‍♂️

[@BikingVikingHH]

Wasted 15 minutes

[@isaiah9313]

Hey genius that right and left is the gyro it's supposed to do that turn the gyro down lmao 😂

[@bluewolfrc]

The whole point of a gyro is to make a car more stable, not less, and y gyro wonr make a car steer on very light acceleration/deceleration, the gyro was off, it was bad diffs genius 🤣 upgrading the diffs wouldnt have fixed the issue if it was the gyro would it? 🤦‍♂️🤣

[@isaiah9313]

@@bluewolfrc Hey Sherlock "Bad Diffs" yeah you don't know what you're talking about. They put a gyro control knob on the controller for a reason if you turn it left guess what TA-DA!!!!! Gyros off... Instead you ruined the car with open diffs that didn't "fix" anything. Now you can't even drift it imo because you weren't intelligent enough to read a manual...

[@bluewolfrc]

Dude, as i said, the gyro was off... learn to read, and the gyro can cause speed wobble, not to pull one direction while accelerating, and the other direction while decelerating. The diffs are known to be way too tight from factory for street use but is fine for drifting, if you listened in the video you'd have realised i only use this for street driving, so open diffs are exactly what i need, i have 1/10 2wd drift cars so i know how to tune and adjust proper gyros, not this joke of a gyro built in to this car stock, if you want a toy "drift" car, leave it stock, but it sucks as a drift car compared to a real 2wd setup, for me this is for street driving not sliding, im even running foams on it now and its amazing, can do 40mph on rails without the need for a gyro, id like to see you do that with stock diffs

[@isaiah9313]

@@bluewolfrc Yeah it was off when you swapped the diff you said. I like to drift around the house so I don't mind it that way. If you like straight line speed then I guess that's cool idk why you'd buy this car then. And you're comparing a 70 dollar car to cars that are 10 times more expensive at that point. I don't expect it to work like that I only use it for the house. Also if you turned the BS music down it'd be much easier to hear .

[@bluewolfrc]

If you dont like the video, you dont need to watch 🤷‍♂️ if you do like and subscribe 😘

[@DanPlays13]

You don't need these it's fixable through steering trim

[@bluewolfrc]

Nothing i did with trim or gyro helped, runs great now though 🤘✌️