Mustang Corsa GT500 Style Sport Axle-Back With Rear Lower Valance 2013-2014 Installation

Bill shows you how to install a Corsa 3" Stainless Steel and Polished Tips Sport Axle-Back Exhaust System w/ Ford Rear Lower Valance for Quad Tip Exhaust on your 2013-2014 GT/Boss 302 Mustang.
Purchase Product Here:
www.cjponypart...
The 2013-2014 GT500 is one of the best looking Mustangs, and one of the stand out features is the quad tip exhaust. If you want that great look long with that louder, throatier exhaust, now you can have it.
Corsa's Sport system features a dual rear exit 3" axle-back with quad 4" brightly polished Pro Series exhaust tips. The kit is uniquely designed to provide the best performance possible while giving you the aggressive sound you crave. When adding this exhaust you will also need the OEM Ford factory rear lower valance for the 2013-2014 GT500. The valance is a direct replacement for the GT500 but can be installed on your 2013-2014 Mustang so you can install quad exhaust.
Ford's GT500 valance can be installed directly onto 2013 Boss 302s and 2013-2014 California Specials without modification. However, the 2013-2014 V6 and GT factory rear bumper covers will need to be modified to accept the GT500 valance. Modifying the bumper cover will require cutting, but as we show you in this video it isn't too difficult and can be done in your garage.
Once installed the exhaust sounds killer and looks like the GT500. If you want a nice aggressive sound out of your Mustang with no drone inside the car, than you will want to check out the sport axle-back from Corsa.
Check out more Mustang Axle-Back Exhaust parts from CJ's here:
www.cjponyparts...
Check out more Corsa parts from CJ's here:
www.cjponyparts...
Subscribe to CJ Pony Parts on KZbin here:
www.youtube.com...

[@carloslugo880]

I cried a lil watching the bumper being cut, but i cried after because it looked and sounded so good!

[@TheSTRedline]

I'm really liking the new Mustangs. These videos aren't helping me fight my urges lol

[@ivannava160]

Gg hjk

[@MrHereWeGoYo]

Yesss!! First mod if I ever get a 2013-14 GT.

[@davidkucher5.0Coy]

Hey Bill! That 2013 looks stunning, and that sound is music to my ears. Thank you Sir 😎👍

[@travfdy]

Wish you guys would've done some driving with this exhaust

[@josuerecinos8935]

You guys are the best 😎😎😎

[@saby8765]

Hey Bill, I'm looking to do this mod to my 2013 gt, but with Borla ataks. Could you please help me with these questions? 1. What LT headers will match a Borla gt500 catback? 2. Does borla offer a catted x pipe? 3. Does Borla have black quad tips? Thank You!

[@danmc2678]

Bumper cutting starts at 6:10!

[@juanpena1733]

Dan Mc not all heros wear capes

[@mattvandyk2526]

12:42 for sound

[@kevinmorales7269]

I have a 2012 mustang boss 302 (kona blue) I want to put quad tips on it. Would I have to get a 2013 rear bumper in order for the gt500 valence to be put on? Or do I just simply buy the gt500 valence for quad tips and cut my 2012 rear boss 302 bumper for it to fit? If you can help me please and thank you

[@mohammedramez]

That’s awesome!

[@HaikBoyadjian2]

is it not possible to just jack it up and cut from under the car without removing bumper

[@Hoodie2103]

Once the 13-14 gt500 valance is installed. Do 13-14 gt500 axle backs or any quad tip axle back now bolt on?

[@Kurtage77]

I have roush axle backs w/round tips on my 2014 gt and I want to get quad tips for this valance. Can the tips be center with the muffler or do they need to be offset?

[@NoMercyGTCS]

Stupid question here, i've seen some videos where the exhaust tips stick a few inches out from the valence. Can i adjust this an push the tips in to where they closely match the bumper and only stick out an inch or so? the ones in this video look perfect

[@betherealdeal]

304 steel... nice

[@RichieNYC302]

I have a 2014 GT and I ordered the GT/CS valence, can I use the same lines and the GT500 valence?

[@Theemikebell]

no way to add it on a v6?

[@rogerz6210]

Hey bill , how can I order parts from CJ Pony also is this can work on my Shelby Gt 2007 ??

[@paultavres9830]

Bill i want a cut out muffler for my 13 One i can hit a switch and open it up Got anything

[@aaroncastellanos3421]

What cutting tool did he use? I'm doing my conversion this friday so i'd like to make my life easier knowing what to get in advance.

[@cjponyparts]

Aaron Castellanos just a small air saw and then a Dremel to clean it up

[@aaroncastellanos3421]

@@cjponyparts thanks!!

[@cjponyparts]

Aaron Castellanos sure no problem, good luck on your install!

[@dominicgracia5908]

If I already installed a roush valence would I still be able to switch to the gt500 since I did already make cuts to my bumper?

[@Zerogivengarage]

+Dominic Gracia The Roush requires far less modifications so you should not have any issues switching to the GT500

[@dextec49]

If you want that look, this is the best or hire someone. DIY forever!!!

[@tayl0rd553]

9:04 GTFOH!! There's a tool for that??? 😮

[@Blueesteel_]

hope they keep the quad tips for the 2015 kit

[@MrMwalker15]

What size blade did you use?

[@DikeLover]

That diffuser or lower valance can you put that on a 2012 mustang gt bc they have different rears

[@Zerogivengarage]

No this is 13-14 only without serious fabrication work.

[@cesarcamejo1035]

How much would it cost to get it installed at a shop?

[@gray334]

Cesar Camejo Just do it your self its not worth spending the money to have it installed at a shop.

[@UnitedStatesOfCoffee]

+Cesar Camejo I got my 2013 Boss Rear Valence installed at ford for $45 flat

[@g.santos2230]

Can I fit this on my 2011 gt500

[@mikixP]

What kind of tool can I use to cut the bumper ? Will dremel work ?

[@deadfound9948]

mikixP it should work just fine

[@gs357s3]

Bill, Have you had any issues with installing this system on a GT with headers and OR X pipe with res delete? Corsa said they may have a ringing sound with Long tubes.

[@Zerogivengarage]

GS357 S Never tried that combo so I can't say

[@Basilahi]

+Bill Tumas hey bill ,do u think this will fit in a 2014 V6 with welding ?

[@Zerogivengarage]

+JennaBringsSexy Pipe diameter is different so it would require welding and reduction

[@Basilahi]

+Bill Tumas do i need a gt over axle pipe or do u think it can be done on stock pipes

[@mrmeni2684]

I have a 2013 GT/CS. Do I need to do any cutting or can I just swap out the valences? Also, does Corsa offer the GT500 style in the extreme axle-backs?

[@Zerogivengarage]

+mrmeni2684 You should not have to cut the center since you have the GT/CS valance. We only offer the sport.

[@mrmeni2684]

+Bill Tumas Hey Bill, how do these mufflers compare, in loudness, to the stock GT500 mufflers?

[@Zerogivengarage]

These are louder

[@Soyyrb]

hey man my name is Rafa wanted to show your KZbin channel some cali love . anyways will this fit my 2014 v6 mustang. ???

[@Zerogivengarage]

+Farmboi Raf22 This is for GTs only

[@Soyyrb]

@Bill Tumas, oh okay thabks for the info. also I wanted to ask about an exhaust I've been thinking about getting one for my 2014 v6 mustang but since there're so many brands and kinda to choose from I'm stuck on which one to go with. if you can give me some info and what kind would best fit mine . thanks

[@californiatruckbody2749]

Would This work with a 2014 v6 ?

[@manny18zl15]

California Truck body yes

[@cross8936]

A drim reel bit?

[@Bigmonkey34mn]

Are these mufflers light? The factory ones are so heavy.

[@Zerogivengarage]

+Andy34mn They weigh about the same since the quad tip does add some weight.

[@chrisjr6942]

would it work on a 2013 mustang v6

[@manny18zl15]

chris jr yes bro

[@bryantpayne4901]

Do these work for the 13-14 v6 as well ?

[@cjponyparts]

These are GT only.

[@DikeLover]

Do all gt500 axel backs fit on 2014 gt

[@jte0291]

Yes with the valance

[@jimbrow83]

These things are to quiet I have long tubes catted x pipe stock resonators and it's barely louder than stock

[@KidApoc]

Is there an equivalent of these for the 2010-2012 Mustangs?

[@cjponyparts]

Sorry we do not have any quad tip options for the 10-12.

[@KidApoc]

@@cjponyparts thanks for your response,love your work.

[@Loveroflife5.0.]

Get a 13-14 bumper and buy the kit it’s the same.

[@KidApoc]

@@Loveroflife5.0. Thanks you much.

[@tadoestuckey2287]

does this work for 11-12 gt500

[@centennial03]

no you will need 13-14 rear bumper

[@brianmf7697]

Can you take a mustang to a shop to get that done

[@cjponyparts]

B M I am sure there are plenty of shops that would do that

[@brianmf7697]

Thank you

[@davidph123]

would this work on my 13 boss ?

[@Zerogivengarage]

+David Last yes

[@davidph123]

bill would I still have to cut my bumper even tho its a boss

[@Zerogivengarage]

not as much but yes

[@TheRealZOG]

+Bill Tumas would I be able to convert a roush exhaust to a quad exhaust?

[@kevinmorales7269]

Bill Tumas I have a 2012 mustang boss 302 (kona blue) I want to put quad tips on it. Would I have to get a 2013 rear bumper in order for the gt500 valence to be put on? Or do I just simply buy the gt500 valence for quad tips and cut my 2012 rear boss 302 bumper for it to fit? If you can help me please and thank you

[@plzhitt8594]

Can I do the same to my v6 2013? I just want it for the looks

[@tristonhart4321]

I just ordered a gt500 valence which fits but the exhaust system in this video might not

[@nopls1]

Does it work for for mustang 1989

[@saby8765]

If it was in carbon fiber

[@Loveroflife5.0.]

Super expensive not even worth it $1800 after tax ! 😬 ouch

[@yazal9884]

and doesnt sound too loud

[@Chefgapparoni]

boss 302 owners dont have to cut anything :D

[@tommydoepel6580]

What about California Specials?

[@tommydoepel6580]

Never mind. it says in the description lol

[@BM-ry9gm]

Where can you get this done at

[@SSmoker1969]

One thing this video Does not show is How is the Valance attached to the bumper cover. It cant possibly be two clips on either end - Thanks for the Video tho

[@jarvisclark8195]

Is the Corsa Sport louder then the OEM GT500 Exhaust? I'm looking 4 a nice rumble sound while crusing.

[@alexpyron7219]

Jarvis Clark no they just build and produce them so they are quieter than stock

[@jarvisclark8195]

Alex Pyron i was thinking of the 11-12 GT500 Mufflers on my 13 GT. Thats why im asking

[@dnsbb8033]

Jarvis Clark they are definitely louder than stock just go with the xtremes