Mustang II Front End Suspension Install

[@misterbulger]

Here's a little tip for anyone as lucky as me... (I came across an OEM '75 front end for FREE) Somebody had cut the frame rails out with a torch. Crossmember and everything with all the suspension. 1 1/2" steel box tubing fits perfectly inside the frame rails if you do some minor trimming. I'm just going to bolt the box tubing in there and use that bolted to the unibody of my rat rod project. Hope that helps anybody who can score what I have if they dont want to buy the kit and do all that welding. I used 3/16 tube so it's really strong. I am basically just bolting this whole front end in with zero fab work. I'm pretty stoked about this because I was dreadding doing all the work you did, although your end result is alot cooler looking to be honest.

[@daboogieman68]

Will early 2000's mustang suspension fit on the 3100? I see alot of these mustangs at the pick'n pull yard.

[@avro549B]

you weld with bare hands; no gauntlets? Even if you don't get hot sparks, what about the UV?

[@billgroel4463]

How to add air suspension to a mustang 2 front end for 55 ford truck

[@johnmaxwell258]

What year truck and make is that

[@joemiller6278]

Pretty sure 48-52 ford F1

[@EHughes7552]

What wheels will clear?

[@ninja63639]

if it goes in that quickly, what would it cost to have you put one in?

[@ridetechtv]

+Christopher Spencer depends on the installer... we cant speak for them.

[@oglokzAntrax]

Do it yourself and it’s free installation 😂🤣

[@kbtube8125]

he said "you". . . ."to have YOU put one in"

[@Crzylon]

might be a dumb question but I'm an amateur. when you were getting that 2° rake, what what the angle of the frame at the center point? is the frame suppose to be sitting at 0°?

[@MiamiCityDjsEmil]

would this kit work on a 56 ih S120 (C style frame rail)

[@1960BOBO]

I WANT TO SUBFRAM FRONT END ON A 1948 CHEVY FLEETLINE TOO RACK & PINION & DISK BRAKES. WHAT YEAR CAN BE USED AND MAKE OF CAR. HELP PLEASE. ROBERT

[@vicintel]

What ifs is this?

[@donpike3258]

Mustang ll suspension has a long history, all of it driven by the need to fix the problems inherent in the Mustang ll suspension (tiny 4 bolt rotors, inadequate calipers, poor strength, bad geometry and more). It was designed for an economy car. Many companies make 'Mustang ll' suspension kits with better rotors, spindles, calipers and strength. No Ford parts remain, but the basic geometry (for roll center, contact patch management, scrub radius and so on) is unchanged. I never use them.

[@patrickbroomell954]

I would like to do IFS on my 1954 belvedere. I was told there are kits that can be simply installed,but I need a new steering column. Not as simple as the say it is??

[@AutofillingTechnologyLtd]

how are you sir?

[@giovannicancro4200]

can you give the part number for all the part

[@TheBigtimsmith]

Where can I buy this kit

[@diegodelapuente1665]

You can buy this kit at Summit Racing phone number 1(800)230-3030, kit part number: HEXIFSMFMGYA01MLSBS5

[@jimmyhobbs5029]

Like the video. I dislike the fact that you did not use any gloves when welding.

[@brenzinc]

does every giant pro shop need the rep's assistance to install this simple piece?

[@cobrahatch]

wow don pike realy opened his mouth.....and i dont totaly aggree with what you said about no ford parts left and factory wasnt that strong

[@aurkmu1]

Suppose you guys dont care if your hands get burned....I enjoy the videos but at least wear some gloves..

[@brenzinc]

I did this for 10+ yrs like that, now my left (backup) hand is no good anymore, be warned!

[@sterlingwitherspoon5709]

I hate when people don’t specify what the hell they’re working on...

[@Davethewelder]

Don’t look like a mustang? 🤔

[@mustangboss1246]

Lol people hate the mustang II.... But most of them have mustang II front suspension on there hotrod lol

[@daleolson3506]

Backround music👎🏻junked video