MV F3 800 Coolant Flush & Fill and HID install

  Рет қаралды 17,493

Euro Superbike Life

Euro Superbike Life

Күн бұрын

Пікірлер: 60
@mosoliman4489
@mosoliman4489 6 жыл бұрын
Derrek As always very detailed instructional video no wonder I opted for an LED H4 bulb when i had my F3 .Even with the BMW I did the same thing as its a lot easier . I had an HID Extreme kit before on my 600 RR kit was awesome and very functional but I was not going to do all that work on the MV .High 5 for all your patience my friend
@ESBKLife
@ESBKLife 6 жыл бұрын
Hey Mo! Yeah I know what you mean bro. I have LED's on the RSV4. It's a bit easier but not much lol. I went HID on the MV because I wanted brightness and a particular color. Check out part 2. It'll but up in about 30 mins.
@sickbikes2066
@sickbikes2066 2 жыл бұрын
Great tutorial 👍🏻 was curious about the exhaust. Which one is it?
@ESBKLife
@ESBKLife 2 жыл бұрын
It’s homemade. The previous owner modified the stock exhaust.
@Firestorm637
@Firestorm637 4 жыл бұрын
Great tutorial as usual. HID are still better than the Led headlight bulbs. HID works well with a reflector or projector. The beam reaches further vs LED’s. I do not drive at night. I wanted the white light vs the dirty yellow T shirt look of halogen. So I went with the leds since no battery harness and much smaller ballast. I was going for Aesthetics versus functionality. .
@stevenunez
@stevenunez 6 жыл бұрын
Thank you Derrick, just what I wanted to see....thanks again, very helpful!
@michaelpowell4823
@michaelpowell4823 6 жыл бұрын
Keep up the great work (especially on the F3) have learned a lot about new bike from your videos. Thank you
@claudio3374
@claudio3374 6 жыл бұрын
Derrek have you ever used Evans waterless coolant on any of your bikes.
@ESBKLife
@ESBKLife 6 жыл бұрын
No haven't but, I gave it serious consideration. What turned me off to it was expense and the flush and fill process. You have to buy their pre-flush product to get all of the water out. It's not cheap lol
@neto196605
@neto196605 4 жыл бұрын
Hey brother I recently got back into bikes after I fell in love with my MV F3. To my surprise, there is very little content on MVs. I find your videos very informational. Since I live in Goodyear, AZ feel free to use my bike for your videos (lol). Hey do you think you can make a video on how to remove the front fairing? Again, thank you for taking the time to help us save some money.
@ESBKLife
@ESBKLife 4 жыл бұрын
Hey Neto. I'm sorry to say but I have some bad news brotha. First, I traded my F3 for track F4. Really regretting that but, hopefully I'll be adding an F3 back to the stable soon. Second l, I'm no longer in AZ. I moved back east and currently have several inches of snow on the ground. So I won't be riding anything until the spring.
@zi7047
@zi7047 5 жыл бұрын
You are a nice person and your videos are useful......keep it up
@stephencole4498
@stephencole4498 6 жыл бұрын
As always superb content, can you advise where you got your wing mirrors from?
@ESBKLife
@ESBKLife 6 жыл бұрын
Hey Stephen Cole, they are CRG Arrow bar end mirrors. You can get them almost anywhere but, CRG does sell them direct.
@Roomer645
@Roomer645 5 жыл бұрын
Derrick, where did you get the green striping ? Looks killer on that white bike !
@ESBKLife
@ESBKLife 5 жыл бұрын
www.redracingparts.com/english/motorbikesmotorcycles/partsandaccessories/stickersdecalsgraphics/mvagusta/RepartoCorseSS2015F3675800RCAgo2011.php
@Roomer645
@Roomer645 5 жыл бұрын
@@ESBKLife thanks for sharing bro ... Looks like it only comes as the complete kit. A tad expensive just got the green stripes but I'll go ahead and contact them to see if they could deliver them separately. Cheers and thanks for all the comprehensive walkthroughs and the hard work that you put in these videos. Thumbs up !
@tassynayexnny8330
@tassynayexnny8330 6 жыл бұрын
Hey! Thx for the video man. Just wanted to know what r the things that u do on normal servicing of this bike? Oil and filter change and coolant and?
@ESBKLife
@ESBKLife 6 жыл бұрын
Hey Tassy. That depends on time & milage and which bike we're talking about. For my street bikes, weekly services consists of checks, adjustments and cleanings. I check for loose nuts & bolts regularly, I check chain tension weekly and clean & lube every other week. But other services are pretty much done per the manufacturer's recommendations in the manual. If we're talking about my track bike. I do oil & filters (oil & air) every 3 - 4 track days, valve check & adjustment per the manual, fork oil & coolant change once a year, checks and adjustments and cleaning before & after each track day.
@fironshell
@fironshell 6 жыл бұрын
ESBKLife This is what I’d like to see. It’s very hard to find any really detailed video on maintenance for the MV. I like how you explain everything and are very specific with the work that you are doing to the bike. I’d love to see you’re valve checks, chain cleaning and lubrication, spark plugs and any other maintenance you do on the MV. I’d also love to see all tools and brands of fluids recommended as well. I’ll obviously be watching and recommending all videos for your bikes as well.
@ESBKLife
@ESBKLife 6 жыл бұрын
I draw the line at engine internals beyond clutch replacement and spark plugs lol. You won't see any valve checks or adjustments here man, sorry. But everything else, absolutely :)
@eddiegile9791
@eddiegile9791 3 жыл бұрын
Is the MV Brutale and Dragster the same bike as the MV F3 ???
@midhung3652
@midhung3652 5 жыл бұрын
Derrick, Can you please do a video on fender replacement for mv agusta f3. I don’t see a video out there for mv agusta. It’d be really helpful also post the links to buy them.
@ishamkader2696
@ishamkader2696 5 жыл бұрын
Manufacture should install front and rear end camera...in stock status/standard..euro 5 is mandatory..camera?
@ukcitizen1158
@ukcitizen1158 5 жыл бұрын
Cameras? A panoramic 180 degree integrated set up costs around $6000. That's nearly 50% of the value of an average sports bike. You going to pay that??? Euro 5 is emissions law. If they don't conform to the emissions laws, they can't sell the bikes, so, cameras are the least of their worries.......
@ChromeDove
@ChromeDove 6 жыл бұрын
Hi ESBKLIFE! You have some great videos on how to! My question to you is I'm having a serious rpm issue with my 2015 Agusta F4. The RPM's rev extremely high for no reason at all. I tried turning the throttle to lower the rpm's but they just keep raving extremely high. Can you help?
@ESBKLife
@ESBKLife 6 жыл бұрын
Hey ChromeDove, I'm no professional tech and without knowing more about the bike, it's hard to say. But if I had to guess I'd say one or more of your sensors are out of sync? Probably the throttle position sensor. Unfortunately, the only way to sync them is with the dealer diagnostics software. I had a similar problem with my 1199 Panigale, only my would shut off not rev lol
@ChromeDove
@ChromeDove 6 жыл бұрын
Thanks again. Not to many videos on the Agusta motorcycles so this is a great channel find for me! I just saw this. I'm better with Facebook! lol
@thegolflife7565
@thegolflife7565 5 жыл бұрын
Is removing the tank on your bike this bike the same as a 2014 brutal 675?
@ESBKLife
@ESBKLife 5 жыл бұрын
Pretty much yes.
@Black_Gold_Saw
@Black_Gold_Saw 6 жыл бұрын
Derrick trust me when I say, try to remove some fluids from the overflow tank to the MIN level. If it's warm and bike is running hot it will overflow or even destroy components with the current level you put in. I run coolant to MIN level and on a hot day it reaches 3/4 of overflow tank. PS: Why didnt you just go for a LED H4 bulb?, no wiring, no balast. Simple plug and play.
@ddisharoom
@ddisharoom 6 жыл бұрын
666JL666 I went with the HID kit because LEDs still don't offer the color I want. I'm not convinced the coolant system is without air and I haven't run the bike up to temp yet per the service manual. Once I do that, the level should drop. If it doesn't, I can always remove some.
@fironshell
@fironshell 6 жыл бұрын
Why isn’t engine ice and other coolants allowed at the track? I’m assuming you endorse water wetter over other brands? Is that the Pitbull one armed rear stand on your rear wheel?
@ESBKLife
@ESBKLife 6 жыл бұрын
What's up Wheelz? It's really up to the track. Antifreeze and products like it are super slippery and very touch to clean off the track. As a result they only allow certain coolant products. This is from the Chuckwalla Rule book "Only water, Water Wetter and Cool Aid are allowed as coolant". Water Wetter isn't one of my sponsors..... yet ;) but, I use it because it works and every track I ride at allows it, so I already know my bike is in compliance.
@ESBKLife
@ESBKLife 6 жыл бұрын
Wheelz of Steel yes that is a Pitbull one arm bandit lol. I love the Pitbull stands! I have 3 of them lol.
@paulsanar9136
@paulsanar9136 6 жыл бұрын
@esbklife what tool what that you used to take off the panels?
@ESBKLife
@ESBKLife 6 жыл бұрын
The panels are held on with 4mm Allen head screws. I prefer T-handle Allen tools.
@claudio3374
@claudio3374 6 жыл бұрын
Thanks for the reply keep up the great videos
@gliddofglood
@gliddofglood 5 жыл бұрын
Strueth! Just getting the fairing off looks like a nightmare. Not exactly the dzus fasteners of the Ducatis. I am thinking of getting one of these but I can see that services are going to cost a fortune in labour! Very interesting video, although I have no idea why you are changing the coolant. How often would you need to do that?
@ESBKLife
@ESBKLife 5 жыл бұрын
Well it was purchased preowned and unless you know the bike and owner very well, you should always change all of the fluids once you take possession. Every 2 years is recommended by most manufacturers for street bikes.
@gliddofglood
@gliddofglood 5 жыл бұрын
@@ESBKLife thanks!
@mauricioarango9369
@mauricioarango9369 6 жыл бұрын
Hi Ken I use led buld in mv agusta dragster 800rr 2017
@TheDfelan
@TheDfelan 4 жыл бұрын
I just found your channel. I like your how to style. I own a Brutale dragster RR. Are you running Angel GT tires on your MV? I was considering (because I don't track this bike) switching up for longevity. I was very happy with the Angels on my 690 supermoto, I just wasn't sure if they could handle the higher hp of the MV. My name is Derek BTW, 👍.
@ESBKLife
@ESBKLife 4 жыл бұрын
What's up Derek! Thx for checking out my channel. The Angel GTs were ok for casual street riding. But they suck ass on the track. Regrettably, I no longer have the F3. Instead I have two F4s lol. One for track the other for street. The street bike wears Bridgestone RS10s.
@VictorCastillo-xu4eu
@VictorCastillo-xu4eu 5 жыл бұрын
Hey dude thanks for your videos! I just got a 2016 Turismo Veloce, same engine as yours but a little bit more tamed. So question about the coolant, other than the track use the recomendáis 50% coolant 50% distilled water correct?
@antoniodonnarumma2252
@antoniodonnarumma2252 2 жыл бұрын
where is the oil sensor on f3 800 crc
@ConvexLLC
@ConvexLLC 4 жыл бұрын
What is the ideal mix and the type of coolant please?
@ESBKLife
@ESBKLife 4 жыл бұрын
I run distilled water and either MoCool or Water Wetter. Follow the mix ratio on your coolant additive instructions. If you're running antifreeze, a 50/50 mix is recommended.
@TheVilouboy
@TheVilouboy 6 жыл бұрын
FIRST!!! Heck Yeah brother!!! Saw the ESBK notification, automatically clicked “LIKE”👍🏾👍🏾👍🏾 Question, what was the advantage of HIDs vs LEDs?
@ESBKLife
@ESBKLife 6 жыл бұрын
Haha, I saw! I was damn, he didn't even have time to watch it all!!!! LOL
@TheVilouboy
@TheVilouboy 6 жыл бұрын
+ESBKLife...Knew it was going to be good. I was actually looking at the F3 (making GSXR-750 a track bike) Good video brother. Can’t wait for Part II
@ukcitizen1158
@ukcitizen1158 5 жыл бұрын
Nice upload D! Keep 'em coming............ FYI; It's pronounced "Agoosta".
@evandbikechannel4234
@evandbikechannel4234 6 жыл бұрын
Quantity of coolant?
@ESBKLife
@ESBKLife 6 жыл бұрын
I like Water Wetter and Engine Ice
@evandbikechannel4234
@evandbikechannel4234 6 жыл бұрын
ESBKLife total quantity of water and coolant?
@ESBKLife
@ESBKLife 6 жыл бұрын
Raule_19 M follow the manufacturer's recommendations. For water wetter its 1oz per quart of water.
@evandbikechannel4234
@evandbikechannel4234 6 жыл бұрын
Ok.but i need quantity total of circuit?
@ESBKLife
@ESBKLife 6 жыл бұрын
Raule_19 M sorry I don't have that info however, it's not required to drain, flush and fill your system. You fill the system until it's full. Bleed the air then fill some more. Continue the process until the fluid level in the radiator stops dropping.
@smoki101010
@smoki101010 5 жыл бұрын
Nice .. jop
@RideThe6
@RideThe6 4 жыл бұрын
Man that's a crappy spot for a drain point.
Mv Agusta F3 800 Ohlins Steering Damper Install
20:15
Euro Superbike Life
Рет қаралды 11 М.
MV Agusta F3 800 Battery change
25:12
Euro Superbike Life
Рет қаралды 41 М.
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
MV F3 800 Modified Stock Exhaust
4:36
Euro Superbike Life
Рет қаралды 10 М.
MV Agusta F3 Starting Issue
0:59
Jock with a Joystick
Рет қаралды 1,2 М.
MV Agusta F4RR Performance Water Pump Install, Part 6.5
27:31
Euro Superbike Life
Рет қаралды 8 М.
MV Agusta F3 STM Evoluzione Slipper Clutch Install
29:52
Euro Superbike Life
Рет қаралды 1,3 М.
Test & Review: MV Agusta F3 800 on the Open Road
17:28
Dave Moss Tuning
Рет қаралды 16 М.
Peter Hickman Workshop Tour - MV Agusta F3 - IOMTT
5:53
Hicky60
Рет қаралды 47 М.
Single sided swing arm chain tension... MV Agusta!
22:26
MV Agusta Lifestyle
Рет қаралды 4,5 М.
How to Set Up your MV Agusta F3 - Full Dash Navigation
11:31
RideThe6
Рет қаралды 10 М.