Рет қаралды 23,546
Want to store your hardtop properly without spending a lot of money? Then this video is for you! I've made a hardtop stand out of PVC. I can't take credit for the design as it has been built before, but I made a few improvements. It's a simple design and it only cost me about 30 bucks in total so you can really save some money by building this demountable movable hardtop stand!
This video is sponsored by:
» www.autodoc.nl...
Things you will need:
(I used 40mm PVC)
» 2 x 127cm / 50inch PVC
» 2 x 122cm / 48inch PVC
» 2 x 64cm / 25,2inch PVC
» 2 x 30cm / 11,8inch PVC
» 14 x 5cm / 2 inch PVC
» 10 x PVC T-fittings
» 4 x PVC elbow fittings
» 6 x PVC Caps
» PVC glue
» Padding
» Hacksaw
» PVC cutter (optional)
» Tape measure
» Old rag
» Bungee cords (optional)
» Permanent marker
» Drill
» Long drill bit
» 4 x Long bolts
» 4 x Wing nuts
» 4 x Small wheels
» 8 x Small screws
» Screw bit
Music I used:
» Chuki Beats - Sauce ( • Chill Trap Beat "SAUCE... )
» Instrumental produced by Chuki ( / chukimusic )
Follow me:
» Website: www.MiataMods.net
» KZbin: / miatamods
» Instagram: / miatamodsnl
» Facebook: / miatamods
» Twitter: / miatamods
» Google+: plus.google.co...
★ If you liked this video please like and subscribe guys! ★