MX5 / Miata MK1 wheel arch and sill repair : 2022

  Рет қаралды 48,232

Yorkshire Car Restoration

Yorkshire Car Restoration

Күн бұрын

Пікірлер: 83
@colinritchie1757
@colinritchie1757 2 жыл бұрын
This is rapidly becoming one of my "Must Watch" channels - For all MX owners - There is hope out there for our little rot boxes!
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Hi Colin and thank you :) its support from all our viewers that makes it all worth wile :)
@thedecliningcyclist3321
@thedecliningcyclist3321 2 жыл бұрын
This is one of the only channels showing sensible economical repairs that will keep these cars on the road and safe for years to come 👍🏻
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Thank you :) we do try to show good usable content that can be applied to everyone car that need Ms attention 👍
@angrywargamer8836
@angrywargamer8836 2 жыл бұрын
Even though you brits have terrible and incorrect names for food your craftsmanship is excellent as always.
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Thank you :) we do appreciate your support :)
@Spookieham
@Spookieham 2 жыл бұрын
My lovely blue 20yr old NB lives here in a cozy garage in Western Australia and there isn't any rust anywhere on the shell. Thank god for warm climates and no salt on the roads.
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Yes it's the salt that kills them Graeme :)
@peterraymond3653
@peterraymond3653 2 жыл бұрын
Thanks for taking the time to make this video. I did a similar repair on my Nissan 200SX, lots of layers but now know what to expect when I do the sills on my son's MX5 track car. Top job and again, thanks for sharing
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
thank you Peter , glad the video is of some help :)
@JohnnieBravo1
@JohnnieBravo1 2 жыл бұрын
Geezus, I surely wish I had the skills you guys have!
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Thank you :)
@leeopenshaw9302
@leeopenshaw9302 2 жыл бұрын
Brilliant as always ,always look forward to seeing what’s happening next on the channel 👍👍the Kate bush singing was spot on😂
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
haha thank you Lee, think i should stick to cars :)
@inuyasha_115
@inuyasha_115 2 жыл бұрын
Liked, subscribed, and waiting for the next few videos, this is a difficult task that no shop will do for me
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Hi, if you have a look back on our other videos you will see some similar examples, but next week this one should be almost finished :)
@melbice9906
@melbice9906 Жыл бұрын
My new favourite channel, brilliant work 👏👏👏🇦🇺
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Thank you , glad your enjoying the channel :)
@markfoster7564
@markfoster7564 2 жыл бұрын
The rust makes me ill…..I know that’s weird…..great work as always!
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Haha thank you :)
@MrTonyBrooklyn
@MrTonyBrooklyn Жыл бұрын
I had no idea that cars rusted so bad in the UK. It is very common here in the Northeast USA. Anyway another great video thank you!
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Thanks for watching!
@chucky2316
@chucky2316 Жыл бұрын
I am in the UK my little Mazda 2 was a rot box steel wasn't that thick to begin with welded some patches in it and moved it on.
@芋男爵-z5z
@芋男爵-z5z Жыл бұрын
大胆で思い切りなカット腐食した隠れた内部を的確に切り取り補修するのはビックリ‼️大胆でも正確に板金するのが凄い仕事が早い。
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
ありがとうございました , google translated , thank you :)
@marine19sniper
@marine19sniper 2 ай бұрын
Great job!!! Could you tell me your welding setting? Thank you and have a nice day ;-)
@jimcameron4672
@jimcameron4672 2 жыл бұрын
Shaping the sheet metal is my favourite part of these great videos, can you tell me the size of the blue anvil you are using as I fancy getting one , I've been having a go DIY style since last year and want to improve ,thanks
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
I will check with you and yes shaping metal is enjoyable :)
@jozhebermeomontero5116
@jozhebermeomontero5116 Жыл бұрын
El Permatex que utilizás es a base de agua...
@thomas.vitzak
@thomas.vitzak 11 ай бұрын
Beautiful repair 👍
@xlee888
@xlee888 Жыл бұрын
What's that tool on 15:27 called where you crimp the metal and make it bend?
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
hi Lee , its a metal shrinker :0
@lazyj4732
@lazyj4732 2 жыл бұрын
What thickness steel do you use for the rear wings? We have 2 Mk1's, one needs a little welding to get it through the MOT, the other we are thinking of stripping right down and getting chemically dipped as it's in a bad way.
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
the rear arch panels are prefabricated as you will see in the next video but the inners sill sections we have repaired in this video are 1mm and 1.2mm in thickness :)
@lazyj4732
@lazyj4732 2 жыл бұрын
@@yorkshirecarrestoration Thank you 👍
@stephenvoisey1391
@stephenvoisey1391 2 жыл бұрын
Love these videos such talent 👏
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Thank you Stephen :)
@mix1806
@mix1806 Жыл бұрын
looks good to me!!
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
thank you :)
@sergiovargas2727
@sergiovargas2727 Жыл бұрын
Hi what type of welding machine is that?
@Ranishmmukundan
@Ranishmmukundan Жыл бұрын
Which types of welding is that mig or flux core?
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
its mig with 100% o2
@Ranishmmukundan
@Ranishmmukundan Жыл бұрын
@@yorkshirecarrestoration ❤️
@coreyposada
@coreyposada Жыл бұрын
​​@@yorkshirecarrestoration You're using straight oxygen for MIG? Maybe you meant 100% CO2? If you are using oxygen only, can you explain why? Fantastic work! Just found this channel tonight. Thanks.
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
@@coreyposada yes co2 :)
@magiQxx
@magiQxx 2 жыл бұрын
if i could, id drive the 1500 miles necessary to have my NB professionally done by you😂
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Thank you for the compliment :)
@eddiecairns2623
@eddiecairns2623 2 жыл бұрын
Yet another other great MX5 tutorial with some questions! 1) Are there still drip holes in the bottom of the sills to let the condensation out. 2) The inner vertical upright repair which was done with a complete plain piece off sheet metal with no access holes, how do you get cavity wax behind it and in front of it and behind the new inner sill covering it? Or is this a say 5-year repair rather than a full expensive restoration that is not justified as if you go looking for further problems you will find them, and the costs will skyrocket.
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Yes moisture vents through those holes, we also drill our own holes to vent more after we have completed the job. the cavity wax can be done through the grommet in the inner arch as it offers a lot of access, but again after repair we drill holes and inject the anti corrosive coatings after the job is done then insert rubber grommets.
@jalopy2472
@jalopy2472 11 ай бұрын
@@yorkshirecarrestorationwhere should I drill holes to spray cavity wax in an NA Miata?
@davidfrance2056
@davidfrance2056 2 жыл бұрын
Hello, Can you tell me what make the folder is on your bench. Thanks
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Hi David , the folder is just a generic one from ebay i think they still sell them but you can buy cheaper ones that attach to a vice and work very well :)
@stringsnare
@stringsnare Жыл бұрын
damn, this is wild. i learned from yt how to do body panel repair with bondo. this is the next step...wonder if i can find a place that will teach me to do this. this is so cool.
@ustimqx3786
@ustimqx3786 Жыл бұрын
На видео отлично показано, то как не надо делать!!!)))
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Thank you for your positive input.
@frankgrimes8714
@frankgrimes8714 2 жыл бұрын
Do you ever regret taking on a MOT repair? For instance its only a bit more money for the customer to use replacement panels and replace it back to as factory and saves you a lot of labor/headache?
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Hi Frank. Replacement panels can be purchased for these jobs and you will see in the next video we do use a panel that replaces the wheel arch and outer sill section but most of the time these repairs stretch bigger than the replacements that you can buy meaning you would have to fab your own anyway. Our videos are here to show you how to replace metal when panels aren't available.
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Also the inner wheel arch sections and under floor section you will see in the next video aren't available as replacement panels :)
@telabib
@telabib Жыл бұрын
Without some internal rust treatment, like dinatrol injection, or something similar, it will just rust away again. Good welding job though.
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
As we state on a lot of our videos everything needs protecting after work has been carried out , thank you for your comment :)
@dynamicb7178
@dynamicb7178 Жыл бұрын
what is that tool called use at 4:24 in this video?
@jamienevill1768
@jamienevill1768 Жыл бұрын
Reminds me of a mk1 I went to look at as my first one. Both sills were nothing but fibreglass and filler. Ouch! Suffice to say, I walked away from that one.
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
yes there are two type of MX5 , the ones that have been done or the ones that will eventually need doing :)
@jalopy2472
@jalopy2472 11 ай бұрын
This one didn’t even look that bad from the outside. Shows that even a little bubbling probably means bad rust on the inside
@БорисБорлаков-ы7ы
@БорисБорлаков-ы7ы Жыл бұрын
Ниче так . Но сварку бы еще настроил для хорошего провара
@46MOTO46
@46MOTO46 2 жыл бұрын
299 ЛАЙК!
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Thank you :)
@deangriffiths8107
@deangriffiths8107 2 жыл бұрын
I do wonder if you’ve ever said no it’s an unrealistic repair? I had a mini when I was a kid that I stripped in my dad’s garage. Got to the point I thought I need my dad, he came and had a look and said nah scrap it.
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Not really haha, most cars we do for customers that are uneconomical have sentimental value so money is never a factor :)
@russellkerfoot5423
@russellkerfoot5423 2 жыл бұрын
I WAS VERY SURPRISED TO SEE YOU HITTING A HAMMER WITH A HAMMER. TWO METALS OF THE SAME HARDNESS WILL CHIP BITS OF METAL OF AT HIGH SPEED. HAS 30 YEARS HAS A TIN BASHER I HAVE SEEN A LOT OFF BAD CUTS AND PEOPLE CARTED OFF TO HOSPITAL WITH EYE INJURIES THROUGH CHIPS OF HAMMERS AND CHISELS.
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Iv been hitting hammers on hammers for over 26 years, never once have I had or heard of a hammer chipping or anything like, but I do understand your concerns, play safe :)
@neilbarnes3557
@neilbarnes3557 2 жыл бұрын
I'm beginning to feel sorry for the tinworm, the way you guys keep digging it out and destroying its nests. It must be nearly getting extinct in Yorkshire!
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Haha we will continue to battle it Neil :)
@charliehargreaves1798
@charliehargreaves1798 2 жыл бұрын
it annoys me that you make it look so easy ! 😅
@yorkshirecarrestoration
@yorkshirecarrestoration 2 жыл бұрын
Hi Charlie. Haha its just practice :)
@thercf16guy35
@thercf16guy35 Жыл бұрын
Stop making this look so easy 🤣🤣 about to do this same type of repair on my rx7 FC S5 I picked up for 800 bucks
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
thats cheap, they are worth a few bob atm :)
@barryphillips7327
@barryphillips7327 Жыл бұрын
I have seen Model A Fords that were in a barn 60 years they were in MUCH better condition than this 💩💩💩💩
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
it is bad barry :)
@يحيصالحالفرحان
@يحيصالحالفرحان Жыл бұрын
Stop the annoying music
@movesky6696
@movesky6696 Жыл бұрын
not good
@yorkshirecarrestoration
@yorkshirecarrestoration Жыл бұрын
Thank you.
@movesky6696
@movesky6696 Жыл бұрын
would i be seen as too old doing car repair work i am 56 old at say college
MX5 / Miata Mk1 rear wheel arch / fender .
21:30
Yorkshire Car Restoration
Рет қаралды 34 М.
How to Repair Rocker Panel Rust (Mazda Miata Mx-5)
14:00
NeedMoarGarage
Рет қаралды 1,6 МЛН
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 55 МЛН
Chain Game Strong ⛓️
00:21
Anwar Jibawi
Рет қаралды 41 МЛН
Ford Escort MK1 Difficult Sill Replacement.  Car Restoration.
48:43
Dave's Garage
Рет қаралды 29 М.
HOW TO make HANDMADE repair panels. ( Using Buget Tools )
27:39
Yorkshire Car Restoration
Рет қаралды 44 М.
HIDDEN RUST !!! MX5 / Miata - Repairing the front floor rocker section.
16:45
Yorkshire Car Restoration
Рет қаралды 11 М.
MX5 / Miata Mk1 rear sill section : inner
15:22
Yorkshire Car Restoration
Рет қаралды 16 М.
The RUSTIEST SILL EVER !! Mazda  MX5 / Miata : inner sill.
24:37
Yorkshire Car Restoration
Рет қаралды 29 М.
Which Miata Engine is Actually Best?!
28:03
Napp Motorsports
Рет қаралды 41 М.
NO WAY !! Sticky TAPE RUST REPAIRS !! : Mazda Miata / MX5 sill / Rocker repair.
22:07
Yorkshire Car Restoration
Рет қаралды 73 М.
Project MX-5: Saving My Rusted Miata From Certain Death
13:11
Car Throttle
Рет қаралды 834 М.
Does a BIGGER Radiator Actually Do Anything?
19:51
Donut
Рет қаралды 2,7 МЛН