My 06 Tahoe Gets an Altitude Adjustment. How to Lower an 06 Tahoe.

[@monicasays6135]

I especially appreciate the outdoor nature sound effects. 😉

[@Fighting-4-Par]

What is that phone/gps mount? I like the looks of that!

[@HicksHouseVideos]

It is a mount from Amazon and I just mounted it to the seat mount.

[@Zandalism]

man I'm glad I found your video I'm about to do the exact same kit to my Tahoe ty

[@montes305]

Yo bro how did it go

[@jeremyallbritton4219]

I been curious about this, definitely glad to see an in depth video on it!

[@santiagoalmanza7422]

Bout some coils from eBay and they came coiled up together and get get them off any suggestions

[@michaelivey7445]

You mention using shorter shocks in rear. I want to do the same for my 2/4" lowered Escalade, but can't find informantion to know which shock to buy. Can you tell me the make and part number, or at least what truck the shocks you used are made for? Thanks

[@HicksHouseVideos]

Look up drop shocks or lowered shocks

[@juiceboxhero6391]

Finally got around to buying this kit. Did you run just a factory length shocks? And how do you like them so far?

[@HicksHouseVideos]

I did use factory length shocks, I did upgrade to bilsteins in the front.

[@juiceboxhero6391]

@@HicksHouseVideos Good to know! Thanks for replying.

[@james10739]

My suburban springs Were wore out probably close to 2 inches low and the receiver hitch would drag sometimes and got the bump stops

[@kingtony234]

Did you need to trim your bump stop?

[@HicksHouseVideos]

@@kingtony234 yes I did end up doing that.

[@kingtony234]

When u say u trim the bump stop. Do you mean that you cut out the whole metal Bump stop bracket?

[@Temperature956]

Post a link to the kitt

[@nestorcaamano307]

Looks awsome bro

[@dklthibodeaux]

Looks awesome! I'm in the process of deciding how low I want to go with my 02 suburban I'm thinking 3/5 but kinda worried about scraping

[@HicksHouseVideos]

Mine is a 3/5 I haven’t scraped.

[@OGSTACCADOLLA]

@@HicksHouseVideos how’s your ride quality over bumps and road

[@HicksHouseVideos]

It. Is much better after I upgraded to bilstien shocks , and now I have cut the bump stops out of the back.

[@geneb.9619]

Love your video..my wife bought me a 05 tahoe , one owner all leathrr 2 wd woth 119 k on the miles..my question is what size tires did you use..its go I ng to be my daily driver..uour video gets me excited..thanks.

[@HicksHouseVideos]

I use the stock 20” tire size, I don’t remember what size it is right now.

[@angelalvarez1289]

Idk if this is just mine but when I went to put the shock extender on the driver side the brake line we in the way for me and I still can’t figure out how to put it cuz when I got to drop it from the jack it like starts stretching the brake line and it’s gonna snap it

[@HicksHouseVideos]

I do t remember having a brake line issue.

[@eddiesantiago5881]

What's size are your wheels? I love the mod..

[@HicksHouseVideos]

They are factory 20s

[@thefoxchamber]

The daily is looking good, bro.👌🏾

[@HicksHouseVideos]

Thanks, I am really enjoying it, I need to polish it bad, but it runs great.

[@vtecbanger3180]

Did this improve handling? Im trying to build a better handling family rig myself.

[@HicksHouseVideos]

I think it did for sure.

[@oscarin5465]

I know its late but did you need new drop shocks for the front?

[@HicksHouseVideos]

No I used stock length shocks.

[@jeffersonlopez6871]

What was the shock absorber kit you used for the front!😮

[@HicksHouseVideos]

I bought bilsteins for the front now

[@spottedsaint957]

That's a good looking Tahoe! Did you lose ride comfortability after lowering it? I've been thinking about having the same thing done to my Yukon because my wife has a little trouble getting in and out of it. My father inlaw also has to use a walker and /or a cane to get around, so lowering it seems to be a viable option to factory ride height. I probably wouldn't be swapping out the wheels because I kind of like the stock wheel that with it ,but later on who knows? BTW, it's good to see the 2wd Tahoes/Yukons getting some love! So many videos on KZbin feature the 4wd models ,not that there's anything wrong with them, but not everyone has the 4wd models. Great job 👍

[@HicksHouseVideos]

It still rides pretty good, but it does bottom out every once in a while.

[@kerryhunter6304]

Do the free travel mod bud look it up .. won't bottom out anymore

[@ThatLSTahoe]

how big are your tires

[@HicksHouseVideos]

They are factory 2015 Tahoe size

[@arthurdelacruz6879]

So u only Need to do the rear?

[@juiceboxhero6391]

What are your wheel and tire specs.? Love the Capri btw. I have an 81 Capri myself.

[@HicksHouseVideos]

They are 20” 2015 stock wheels and tires, thanks I love capris

[@juiceboxhero6391]

@@HicksHouseVideos my favorite car. They are way under appreciated

[@neidxox2770]

I have a question brother, there is no problem if I only use torque wrenches and put new upper A weapons without changing the splinters, is there any negative consequence?

[@anthonyparga1977]

I went online & selected the trim & whenever I put the LS one it says not compatible

[@chonvalverde7079]

Is the 06 set up the same as a 05 cuz that kit said it won’t fit

[@ramonrivas2136]

Any rubbing??

[@HicksHouseVideos]

It barely rubs when you back up at full lock

[@duaneshoemake7826]

We're they able to align it with the torsion bars backed out?

[@HicksHouseVideos]

They got it close, I haven’t had had any tire from it so I think it’s good. I have driven it several thousand miles already.

[@anthonycortez9592]

Will this drop kit work on a 05 Tahoe 4WD??

[@HicksHouseVideos]

I think the 2wd spindles are different

[@clarkeboss1072]

Mane 06 tahoes or dinos dont see them around too often had one and had to sell it cuz of covid...smh bought a gmc yukon to replace it...love these trucks and turning mine into a race truck

[@justsimpz3613]

Did you have to trim the bump stops? I’m doing this today I’m tryna get mentally ready in what I have to do

[@HicksHouseVideos]

Yes I did I trimmed both front and back

[@justsimpz3613]

Doesnt fit on mine with rims stock rims on

[@HicksHouseVideos]

It says on the kit that you need a special nut to run 18s

[@justsimpz3613]

@@HicksHouseVideos yeaaaaaaa I have 17s so I guess I’m squatting it till I can get bigger rims lol

[@rogelioplacido-y1f]

How the drive with the 2/4 drop …cause on my Tahoe I have 2/4 drop has well but from the rear ever bump I go on the st hit n especially when I drive with family shake so I mean I need to put spacer ?

[@_bis4build_]

You cut the bump stop bracket so it has more travel. There are plenty videos on here with the mod.

[@rogelioplacido-y1f]

Where did you got your 2/4 drop kits ?

[@trulyblessedziiz1030]

Nice video, are u still running factory shocks or do u have to get a different size?

[@HicksHouseVideos]

Factory size, but I am going to go with shorter ones in the back.

[@trulyblessedziiz1030]

If possible can you send me a link when you make your decision and did u have run extenders for the set up as well?

[@HicksHouseVideos]

It came with extensions but they are still a little to long. I’m going to use some shocks I had from another project.

[@MartinGonzalez-pi4qv]

What brand of shocks is those ??

[@HicksHouseVideos]

They were from adavance, but I have since upgraded to bilstien

[@TheMaghrabiSM]

Was this tahoe 2WD originaly, I saw torison bar in it

[@HicksHouseVideos]

Yes it was

[@nairbudy6403]

2Wd suvs were torsion bar. Most 2wd 1500 trucks were coil springs. I say most cause some later ones were torsion…strange.

[@HicksHouseVideos]

This is an 06

[@Walrus50]

My 01 2wd tahoe is torsion my 06 Sierra doesn’t have torsion

[@BodyWeakDotNet]

Great Video...

[@HicksHouseVideos]

Thanks

[@kimberlyrichardson5779]

You still have the Tahoe? How’s the quality of the parts? Has it been a good ride? Thx Anthony

[@HicksHouseVideos]

I do still have it, I have since cut the bump stops out and added bilstein shocks. I rides pretty well, but it does bottom out the back on huge bumps.

[@kerryhunter6304]

​@@HicksHouseVideosDid you do the free travel mod where you cut the whole bump stops mounting section out or did you just cut the bump stops flush

[@theunnoticedpodcast]

What was the drop sir?

[@thefallofgenesis5303]

What size are your rims?

[@HicksHouseVideos]

Factory 2015 20 inch wheels.

[@krisphifer1114]

@@HicksHouseVideos what size tire with your drop?

[@HicksHouseVideos]

It is stock size tire for those wheels, I don’t remember the size

[@austinkoch6126]

What are those rims called

[@HicksHouseVideos]

They are 2015ish factory Silverado wheels

[@ivan831_9]

What size tire ?

[@HicksHouseVideos]

Stock 2015 20” size

[@pologarcia1447]

She looks nice brother 😎 can you do me a favor & send me the link of the kit to do it on my 01 Tahoe please I really appreciate

[@HicksHouseVideos]

The link is in the description, you can click on it there and it will take you eBay

[@pologarcia1447]

@@HicksHouseVideos thank you so much brother 🙏

[@pologarcia1447]

@@HicksHouseVideos how you doing ? the shocks any size in special ?

[@HicksHouseVideos]

They are stock size shocks, I bought some from advance but I need to find some better ones.

[@pologarcia1447]

@@HicksHouseVideos oh ! Thank you brother for your quick answer to help me ! God bless you!

[@anthonyparga1977]

Would this kit fit on a LS Tahoe ?

[@HicksHouseVideos]

Is it 4wheel or all wheel drive?

[@anthonyparga1977]

It’s 2 will drive

[@anthonyparga1977]

What rim size you have in this video ?

[@HicksHouseVideos]

They are 20s

[@KurruptedDataYouT]

Does it handle better?

[@HicksHouseVideos]

It does now, at this point I have tightened the front back up about 4 turns and added bilstein shocks

[@mikessplboxes7497]

Im gonna get this drop. I drive on the hwy a lot. Currently have 24” wheels. Will i have to cut the bump stops?

[@HicksHouseVideos]

I did after this video.

[@mikessplboxes7497]

@@HicksHouseVideos may i ask why? Does it makes a difference?

[@yorchglez7429]

What tire size u running??

[@HicksHouseVideos]

275/55/20

[@FoxbodyTV]

Good info great video! 😎

[@HicksHouseVideos]

Thanks bro

[@wtfobiden]

Monica gonna have an easier time gettin in and out the Tahoe.

[@HicksHouseVideos]

Oh yeah much easier!

[@BuySellTrade-g7i]

Suspension is the one thing I would not buy on eBay

[@HicksHouseVideos]

I’m telling you this spindle looks as good if not better than the spindles I bought from western chassis.

[@mauryamckendrick5446]

It all depends on the vehicle you are getting the parts for. Tahoe's and Yukon's and the trucks if you look at the parts he got they are literally just big chunks of metal!! All the important items like the ball joints or any part that moves and can fail, it's all factory stuff that is used not aftermarket items know what I mean? I agree with you totally on say Honda civics and Integras, I got "coilovers" and upper control arms that were adjustable for camber correction. Two different types one had the mounting bolts that held the arm to the strut tower were slotted so the entire arm would move in and out. The other was a ball joint that was slotted so it could move and bolts would lock it in place. Both kits almost killed me when after just a few hundred miles they broke!! Ball joint came apart like the actual joint pulled out of the socket part and the other style with the slotted mounting bolts they split and came out of the spot they should have been in!! Stuff like that definitely dont go cheap on!!

[@Tbss77]

Can this kit be used on a awd Escalade ?

[@HicksHouseVideos]

I’m not sure, it should say in the description on eBay

[@noevictorsanchez623]

Is it possible to use this kit with Bilsteins 5100's???

[@HicksHouseVideos]

Yes that’s what I have now

[@noevictorsanchez623]

@@HicksHouseVideos That's good to know. I was only going to go through with getting a drop kit with the assurance of being able to put some good shocks on it. Appreciate your content!

[@HicksHouseVideos]

Thanks for watching

[@noevictorsanchez623]

Another question, sir. Just need confirmation, so the front Bilstein 5100 shocks won't we affected by the 2" drop?

[@HicksHouseVideos]

No because it is using a drop spindle so it still uses stock length shocks