My 1999 volvo vnl 770 walk around

[@StrongholdDefender]

My favorite semi truck old Volvo are the best.

[@marcosmartinez7788]

I have same volvo but the vnl 660 on n14 Cummins red top haven't for 10 years and still love that truck yes new is new but big question is that new truck run and not give problem yea alot sensor and all kind bullshet I have perfect combination a cummin plus Volvo doing some updates too

[@MrVal916]

These old trucks will keep running a making money👍

[@dannylopez1875]

I like your Volvo :)

[@SeKeshtuMePelqen]

I have 99volvo 13speed 12.7 Detroit I love it

[@ice-cold8827]

There aren’t a lot videos of 770 on KZbin. Please post more videos of the truck if you can

[@xiaomicentro7759]

Esta linda tu máquina

[@romanianisraeli]

Amazing Truck, are you from Moldova? I am from Romania, i noticed a the coat of arms on the door.

[@MrVal916]

Thank you. Yes I was born in Moldova 🇲🇩

[@romanianisraeli]

@@MrVal916 Eu sint din Romania doar am observat stema.

[@marcosmartinez7788]

And you have a cuban coffee maker jaaaaaaaa that's nice

[@MrVal916]

Yes that is for overnight loads 😄

[@uslugipogrusica186]

Молдован он и в Америке Молдован 👍удачи тебе!!

[@MrVal916]

Spasiba

[@uslugipogrusica186]

@@MrVal916 de ce nu vorbesti in limba rusa o sa te priveasca mai muti ?

[@MrVal916]

@@uslugipogrusica186 idea e bună 👍

[@gaganjotsingh8308]

Did you gets the parts of this truck bcz too old, m looking old truck which exempt from eld

[@MrVal916]

I had this truck before the ELD mandate became mandatory

[@davidwilliams6709]

How far back is your 5th wheel for you to have room for your toolbox and generator?

[@MrVal916]

I don't know the exact measurements but I keep it all thw way back. Also I have longer frame than most volvos

[@Angeljr1022]

Where is the fuse box located on this trucks ?

[@MrVal916]

In the dash board. On the top in the middle. Where the cb should be . Its underneath that cover

[@Angeljr1022]

@@MrVal916 thanks ,nice truck btw

[@annasinigur7458]

That's a cute pink truck.

[@MrVal916]

Rose gold okai

[@gaganjotsingh8308]

Is this exempt from ELD right??

[@MrVal916]

Yes it's eld exempt

[@gaganjotsingh8308]

@@MrVal916 that's good

[@volvomodel420express]

Where did you buy the guard ?

[@MrVal916]

I got it from a company in South Dakota a while back. But I would not recommend them . They did a very poor job on the reinforcement part of it...I had to spend more money to fabricate and weld in order for it not to shake. If u want a good one go with Hers or Aliarc. Same price just better quality

[@volvomodel420express]

Blogger Val3rA thank you

[@ДальнобойвАмерике-ъ4т]

I wanted to tell you do not forget to be back to your truck👍🚚

[@MrVal916]

How could I forget 😉

[@michaelnedelcu23]

Did you need a seat bracket for that seat or it bolts right in?

[@MrVal916]

I did not need to use any bracket. However I did buy the seat at volvo dealership. So I'm not sure if it was specifically drill to fit volvo or not.

[@michaelnedelcu23]

@@MrVal916 ok because am cumparat acelas scaun so i wanted to k ow if it was the correct fitnent ty 👍🏻

[@MrVal916]

@@michaelnedelcu23 should fit right in.

[@michaelnedelcu23]

@@MrVal916 hope you right because i really like this seat

[@MrVal916]

@@michaelnedelcu23 if it doesn't fit than volvo sells a plate one of my friends had to use the plate on his 2001 vnl 760.

[@iryna-arianamisiruk]

Скажи пожалуйста какой у тебя mpg? У меня такая же mpg 5.5((

[@MrVal916]

It depends on the road conditions. If it's good weather and no wind in the summer I get close to 7mpg but if it's cold weather in the winter and windy it's closer to 6mpg

[@paladin3116]

whats your average fuel mileage and how much does it weigh without a trailer? thinking of getting one of these

[@MrVal916]

I get 7.5 to 7.9 depending on what route I take and what weight I pull. However I put brand new injectors last summer. Before that I was at around 6.3 to 6.5 mpg.

[@paladin3116]

@@MrVal916 oh ok that good because i didnt want to go below 6mpg, deciding between a old volvo like this or a fl columbia. did you tune your engine for less horsepower?

[@MrVal916]

@@paladin3116 I actually tuned it for more. It was at 430hp and 1400ft of torque. Now I have it at 524hp and 1700 torque

[@paladin3116]

@@MrVal916 overall how is the ride, is quiet and does it bounce around a lot? The fl columbias are ruff

[@MrVal916]

@@paladin3116 you can not compare a freightliner to this. I mean it's not like a brand new Volvo but it it very comfortable ride

[@nurbeksatkynbaev9771]

Zdarovo brat gde delal tune?

[@MrVal916]

Cleveland OH. Guy names Calvin dis it.

[@vltod9167]

Is it for sale for the right price?

[@MrVal916]

No no not for sale

[@vltod9167]

@@MrVal916 do you know anybody selling 99 or 98 volvo in good condition

[@MrVal916]

@@vltod9167 yes. I do however I doubt he will ask cheap

[@er.l1216]

@@vltod9167 I got a 2001 198000 miles 4500 hours if your still interested

[@prcc8793]

​@@er.l1216 still available?thanks

[@cheap_freight_LLC]

Nice truck bro! I've heard that these older Volvos are quite heavy. Do you know how much she weighs with full tanks of fuel?

[@MrVal916]

Thank you. I dont know how much it weighs but I have great dane reefer and I can scale 43700 at most.

[@ice-cold8827]

I just got 2000 770, it weight 17.5

[@jotapro2018]

Ese.camiòn.què.es.sù.precio Luis.Rivas.Nuñez.py.o.este.video.en.Español.tanks

[@ionfocsa4362]

What's the message bro?

[@MrVal916]

Da subscribe and I will post more interesting videos 😉

[@Серега1969Мурманск]

Че за гарбичь??

[@MrVal916]

One man's junk is another man's treasure

[@lllk7488]

@@MrVal916 это он за свой камаз, который взял в аренду на 40 лет для мурманских рудников

[@costinelsaghin9590]

Very poor track driver in American fuel Quantity no Quality parts madly ghaina DOT terrorized truck driver stolen Legally money tight state patrols terrorized truckers driver truck stopping solare gras food truck stop

[@mihailberlet93]

Убрался бы в машине а срач

[@MrVal916]

Ok 👌

[@treesandmore4453]

Where did you get that bumper?

[@MrVal916]

I got it from a company in ND but I don't recommend them. They did a bad job i had to spend extra money to make it work and fabricate extra frame because it was shaking and was just made cheap on the frame part . Go with Aliarc or Herd. They are the best