My Boom Racing BRX02 Build, Part 3, electronics & Terst Run, All the Gooies

All of my chassis kits, bodies and more at RCeveryday.com
If you like shopping with Amain, please help support the channel and use the link below!
www.avantlink....
Check out my Amazon influencer store page for some of these products and help support the channel!
amzn.to/2NMKTtX
Interested in Bambu Lab 3D Printers, check them out here
shareasale.com...
Looking for Boom Racing parts and kits? Get them here; www.asiatees.c...

[@TheUncleRuckus]

You could always do some touch ups by decanting some paint into a small container and stipple it onto to rims. 👍👍

[@Fortes_RC_Adv]

So beautiful 😍 🤩 👌 💖

[@trainspotter446]

I'm looking forward to seeing this completed. I would go green and cream.

[@TrokaRC]

4:05 Leaf spring slider. 👍

[@alphamale1568]

I built this truck a few months ago and I have been through several different wheel/tire combinations with different offsets trying to get better steering with tire clearance. The steering angle with the stock wheels and tires was pretty bad and my front tires were always grabbing the leaf springs well before full lock. In reverse it was even worse until I fixed the tow out on the front end like you mentioned. I guess if you don't need tight a turning radius it won't matter, but it bugged me. I'm not sure if I am looking forward to the rest of your build or not because you have less patience than me when it comes to a rattle can paint job. : )

[@bcochener]

Boom! 💥

[@FaithSaraG]

Definitely wait until you build the body and install the light kit before you finish the wiring.

[@alans4281]

Do you heat the can of paint in warnish hot water, for ten minutes?

[@BullmanBuiltRC]

Sconde conemmt!

[@Elmospiece]

This sums up what I came to the comments for. 😂

[@crossfirejeep1381]

Frist one

[@PonkyKong]

If the humidity isn't perfect you will get orange peel paint.

[@-Gerald-]

Have you noticed any leaking from these shocks yet?

[@RCeveryday]

not yet, just installed them on one of my tf2's as well. Giving it some time before I say anything

[@-Gerald-]

@@RCeveryday Thanks for your response. I think I may try them out.

[@IGNORANTNY]

how small is a hotwheel car compared to the scale of the shop & rigs?

[@RCeveryday]

About as big as the wheel on this truck

[@IGNORANTNY]

@@RCeveryday sweet man cool perspective

[@FaithSaraG]

Boom Racing springs and shackles are narrower than RC4WD springs. 😢