My Buddy's FULLY LOADED Snap-On Toolbox Tour! | 40" 6-Drawer Roll Cart

[@MrXyzasdf]

Your buddy must be a very successful mechanic

[@EzTechJoe]

Yeah, He is pretty good at what he does! Young in age but mature in heart

[@T00TALL48]

@@EzTechJoeyou can hear it in his voice…. We been a blue collar worker 2 years before he was born

[@beyond2600]

You guys are pretty chill guys! Enjoyed the video a lot.

[@EzTechJoe]

Thanks! Appreciate that💯

[@johnmilner6463]

Great walk through. It’s refreshing to an honest opinion.

[@McLovin-m2l]

I finally upgraded my box after four years from a husky toolbox to a Matco. I’ve had it for about three months now and honestly I regret it paid 600 bucks for the Husky toolbox, and the quality seems to be better than the Matco. The drawers opened and closed a lot better , I’m sure if the toolbox stores need to break in but they’re hard to pull out and close you have to kind of slam. It scattered your tools everywhere.

[@vexor7]

Great tour with a realistic perspective behind it.

[@mechanknuckle]

Steady set of tools right there. Good to see people working a great skill. I'm 99% sure that box is almost identical to the USG 34" full bank cart. It really is almost identical.

[@EzTechJoe]

No doubt!. I'm looking into that 34" Bank cart myself

[@harkiratbhangu4983]

Most honest tool review video 😅

[@EzTechJoe]

I think you do the people a disservice by Not being real lol

[@StrongerThanBigfoot]

I’m getting ready to start as a diesel tech and I’m so excited and will definitely be following your channel to learn from

[@EzTechJoe]

Aw man that's whata up! Thanks and Welcome aboard! Good luck on your career man. No doubt

[@StrongerThanBigfoot]

@@EzTechJoe Thank you and I look forward to watching you grow as a mechanic and KZbinr

[@FusionKota]

Our Snap On guy sold me a 3 piece dead blow ball peen hammer set in foam for only $250. I still felt violated but holy shit are they the best hammers I've ever used. You hardly feel any impact in your hands so I doesn't hurt so much when you hit something that isn't going to move! He also got me good with the Snap Ring plier set in the foam and carrying case for 300. He's always got some crazy deals to help you fill the tool box real fast lmao

[@EzTechJoe]

Man!🤣🤣 see that how Snap-on get you. They always have the deals lol. But $250 that's not bad at all

[@devonm301]

Snap on dead blow ball peen hammer and snap ring pliers are fucking worth the price. Both phenomenal tools

[@fester1957]

Love the cranberry color

[@winchesterp05]

Skylar is hysterical! Good tour.

[@EzTechJoe]

Thanks! Appreciate it💯

[@cyrusmoser1090]

I have the same set of Snap-on pry bars and I'm not real happy with them! The handle is a little to wide and the strike cap is rounded and not flat!

[@CountryDiesel]

That's a good looking man right there!

[@EzTechJoe]

🤣🤣🤣🤣🤣🤣

[@ethanfoster5028]

Love your videos bro!

[@EzTechJoe]

Thanks man! I appreciate it. 💯

[@BA-pz3lo]

thats a lot of money right there. all the money he makes goes right back into the toolbox lol

[@peterchristlieb]

What’s up brother, love that cart, thinking about getting one of those to replace the two carts I have now (A General 5 drawer open bottom and my first cart, a Husky flip top single drawer). I bought a blue General 56” top and bottom before I realized that the multiple short drawer configuration and 18” depth meant my old 36x24 Husky top/bottom deal held nearly as much stuff. I still love it my General but I miss the deep drawers. For your extensions, get some magnet bars from HFT and figure a way to attach them to the inside of the lid of your cart, maybe stick an MTS or VIM magnet plate to the lid and the back sides of the bars to that?

[@CountryDiesel]

Hey man! This cart is the 46 inch cart, and I was able to fit 70% of everything in that blue us general 72 inch into this snap on, plus the casters are buttery smooth if you're rolling around the shop all day. As far as the extensions go I've never considered using the lid for more storage, that's a great idea! Thanks for the feedback and have a great day 👍

[@cyrusmoser1090]

"Old" Klein Tools adjustable wrench is called a spud wrench. Millwrights / iron workers use them as a line up bar.

[@armotech54]

Great video guys 👍🏼👍🏼

[@EzTechJoe]

Thanks 💯💯

[@alanchanthavisouk8557]

Had bad experience with Milwaukee brands. Pick up the dewalt dcf903b, dcf891. And dcf900 so far I'm liking it. Who knows if it does work out in going back to snap on.

[@EzTechJoe]

Yeah I run dewalt as well. I have no complaints

[@Nothingmore71]

Mostly only internationals use a 5/8" male pipe plug on diffs in my experience, most everyone else runs 1/2" female pipe plugs

[@MattMorris481]

I understand buying Snap On you’ll never have to buy it again and there’s an American worker behind that tool.

[@luxuryacuraz]

Awesome Video

[@EzTechJoe]

Really appreciate it!

[@Anonymous..VQ3.5Lg35]

Put the extensions on a magnet panel on put it in the inside flip top

[@Shouk02]

I still cant believe he said he can knock drums off with a 56oz hammer… ive had drums so stuck i have to hit them with a 30lbs sledge until it cracks and falls apart.

[@EzTechJoe]

Wow lol. That's a lot of hammering

[@jamesburch716]

Can you get the part number for the power strip in the top of the cart?

[@EzTechJoe]

I would have to get in touch with him and ask him my man. Because I have no idea

[@jamesburch716]

@EzTechJoe I tried to find it and the one I found didn't look the same. Would like to get one for my cart just like it

[@chakagillis]

Theres always going to be work for you when you work on freightliner, them things are straight up junk 👍🏿

[@jlw1985]

For my battery impacts, I love my Milwaukee’s, I like the snappy duel trigger but I feel like the Milwaukee have more umph, however I hate Milwaukee ratchets, I love the snappy 14.4 ratchets,

[@tonycroteau9264]

Great video 👍

[@EzTechJoe]

Thanks! Appreciate it💯

[@randallburkhart8452]

How do you buy a U.S. General off the tool truck? Was it a trade in?

[@EzTechJoe]

Yes a trade in

[@MrArthuro90]

I’ve some Cornwell race chisels and same thing happened to mines I agree it’s just a waste of money 😂

[@EzTechJoe]

Yeah. Wasting money comes with the game sometimes 🤦🏾

[@justinjohnson2617]

I would get a magnetic tail at hf to hold the extensions to the lid just a thought

[@EzTechJoe]

That's a great idea actually. I'll make sure he sees this

[@cudaboy71]

Bahco are great adjustable wrenches

[@CountryDiesel]

The wide mouth Snap On one's I mentioned in the video are made by Bahco actually! They're great little wrenches

[@georgebonney90]

Thanks guys 👍

[@DocsPropShop]

Dose MAC warranty your screw drivers?

[@DocsPropShop]

The Snap-on power tools last and last. Milwaukee good for about 3 years the poop out. Snap-on has lasted decade+.

[@EzTechJoe]

They should as long as the warranty holds up.

[@DocsPropShop]

@@EzTechJoe are they lifetime??

[@EzTechJoe]

@DocsPropShop I see my Mac Guy tomorrow. I got you then!

[@GCraigmile]

Nice👍👍👍👍👍👍

[@dnbstreamer]

that is the cranberry color right?

[@EzTechJoe]

Yupp thats it

[@FluffyMexicanik]

Holy shit bro, 36k on the video 🤯🤯

[@EzTechJoe]

Man!! My guy did a good job going through his toolbox!

[@FluffyMexicanik]

@@EzTechJoe yea he did lol youre doing great with what u doing to bro, keep it up

[@EzTechJoe]

@@FluffyMexicanik aye appreciate that man. I just wanna be like you when I grow up lol

[@FluffyMexicanik]

@@EzTechJoe lmao fluffy??

[@EzTechJoe]

@Fluffy Mexicanik naw I got that part already 🤣

[@marcwilliams7285]

Then snap on needle nose are the real deal

[@EzTechJoe]

No doubt!

[@jash6105]

Did he really say he bought a harbor freight box on a tool truck? Wtfff I feel so bad, I wonder how much more it was

[@CountryDiesel]

Not much, only 200 more than from the store, didn't have the money to buy one outright but my MAC man went and bought one, added 200 bucks, and sold it to me on a truck acc

[@jash6105]

@@CountryDiesel not bad esp considered it gets delivered right to the shop. 👍🏻

[@twostroke12v71]

Commentando en el video Para la computadora

[@Nothingmore71]

Buying absolutely everything from Snap-on is stupid, refusing to buy anything of quality off a truck is also equally stupid. With that being said buy the tools you are going to be beating on every single day for the next thirty years from someone of quality. I personally have a tool addiction I was just born that way so I actually want to spend my money on tools and there's nothing wrong with that. Y'all shop sissies gotta stop being jealous as hell

[@alpha42069]

poor guy sold his soul to snap on

[@EzTechJoe]

🤣🤣

[@jimmywells33]

All that wasted space between two giant boxes but very little tools.

[@stonedmega1]

That angle wrench set skips 1 3/16, very common on HYD fittings.

[@CountryDiesel]

Yep, snap on set only goes up to 1 1/4 sadly, after this vid I purchased a tekton 1 3/16 for when I'm working on hydraulic stuff