Jacksons SNAP ON KRSC430 TOOL BOX TOUR UPDATE

[@MaintenanceMan00]

Was in the 82nd from 14-18. Great to see a fellow paratrooper on the KZbin. AATW!

[@noisycricket8924]

Hands down the coolest screwdriver organization I’ve seen

[@Toyotas_n__Tools]

@ 10:40 those flexing extentions can be bought at Oreily's in with the titan tools. Same Chinese manufactured tool. I like how they changed the lock on the locking flex snap on. I don't care for the matco locking mechanism.

[@Wood-gd9tc]

Got Ernst also! I got a bunch of Toolbox Widget organizers but didn’t like em as much as those Ernst!

[@cblack1863]

Pretty sure those extensions you guys like are VIM. They makes them in some really nice sized sets... locking, swivel, wobble plus etc in all three drives. They're all spring loaded non-floppy, they like to call them Vimagra lol Nice box, love that color!

[@M4ttj0nes]

Can you ask him for an update on the bed liner top? I’m trying to decide on bed liner vs stainless and it seems people have a lot more issues with bed liner. Thanks brother

[@MrZimmaframe]

This kid is too nice. If you took my tools or drill bits and didn’t ask you’d learn not to, the hard way.

[@RageBrothers]

Lol

[@raider762]

Yes. That kid is being taken advantage of, the 'master' tech should buy his own tools. The apprentice needs that snap on sign that states "keep your dick beaters off of my tools!"

[@Itsme.-ic4ul]

What a badass

[@MrZimmaframe]

@ People need to learn to respect other people property. Maybe garages are soft/different

[@Itsme.-ic4ul]

@@MrZimmaframe My bad alpha, I’ll make sure to stay outta your garage so you don’t have to teach me the hard way

[@chiefwiggum4216]

Love it, I have the same one in green :) If you want to get rid of that annoying slider binding up when the drawer is out half way open you can take off the rubber bumpers at the back of all the slides.

[@Toyotas_n__Tools]

Try the Capri 4 way wrenches, they're really nice to use on things where you have no room to work.

[@ryansgarageMA]

Love the color! I have the same thing but with copper trim

[@DanBrown-f9h]

Thx for the reply. When I was in Vietnam with the 3rd Brigade, the first and second of the 505th PIR were also in the 3rd Brigade. I know the 82nd has changed a lot since I was in it, so is the 505th still part of the 3rd Brigade. Too, the 82nd had a 4th Brigade, which the 1/508th went to, but I understand the 4th Brigade is gone now so is there still 1/508th PIR? Since I only spent 19 months total in the Army as I got an early out when I DEROSed back to the good ole US, I never did any state side duty so was never stationed at Ft. Bragg (will never be politically correct, so it will always be Ft. Bragg, to hell with Ft. Liberty) I worked in the defense industry designing, building, and testing military vehicles for 30 years, in fact if you're familiar with the FMTV, I was a Test Engineer for the company that built them. The 82nd was the first division to get the FMTV and as there were lots of them there, I spent quite a bit of time at Bragg training, supporting, and repairing them. Second biggest base the Army has after Ft. Hood, which also got the 'politically correct' name change. At the time I was there, Ft. Bragg had a great museum, which, as I recall got moved to downtown Fayetteville, but has now been moved back to Bragg. Great museum with lots of pictures of them in Vietnam. I wasn't in a single one. Once again, thx for your service and AATW. Let's keep this conversation going as I'd like to hear some of your experiences in the 82nd.

[@DanBrown-f9h]

Excellent video and tool box tour. Couldn't help but notice your 82nd Airborne tee shirt. I spent 14 months with the 82nd in Vietnam, Charlie Co., 1/508 PIR., 3rd Brigade, only one that went to Vietnam. Read the book Golden Brigade and Tom Clancey's book Airborne. Great books. Were you an instructor, i. e., Black Hat, at Jump School? Noticed your POW/MIA bracelet, too. I have several of them and know all about the person on them. Just Google the name and you'll find them. Thx for your service, AATW.

[@RageBrothers]

@@DanBrown-f9h I just retired… I have been in every brigade of the 82nd. Most recently I was HHC 3BCT 1SG. Before that I deployed with 2-505 to Afghanistan as the HHC 1SG. I was a jumpmaster instructor from 2012-2015 at the United States Army Advanced Airborne school. I’ll check them books out thanks for watching the channel!!! AATW

[@joruckus]

Nice setup! What were the wrenches at 14:09? Never seen those before. I need something like that!

[@RageBrothers]

@@joruckus Cornwell and Matco sell them… webcat.cornwelltools.com/BPRW12SBFMST-12-Piece-Cornwell®-bluePOWER®-72-Tooth-Metric-Flex-Ratcheting-Slim-Beam-Wrench-Set-p371692113

[@joruckus]

@RageBrothers thanks, Brotha! Enjoying your channel, man! Keep up the great content!

[@Sam-kc4xd]

Nice box. My box is coming but in green envy 😊

[@JeffreyCargile-b4z]

what wrench holders are them?

[@TooljunkieDave5215]

My krsc242 is suuuuper heavy when fully loaded that’s my only complaint about it. Nice tools though.

[@TennesseeAdventurer]

I don’t have a Snap-on truck so I was going to order a ratchet from their online catalog. What is the BEST tooth count to buy? I haven’t held or used any so I have no point of reference lol.

[@RageBrothers]

@@TennesseeAdventurer get the OG dual 80… the new ones are garbage… try FHLX80BG… this is my favorite ratchet

[@TennesseeAdventurer]

@@RageBrothers Thank you for the info!

[@inidaho6740]

Nice box, thank you! I have the same box! Question, flex ratchet wrenches with grey handles, on ride side of drawer....who makes those? Thanks in advance!

[@RageBrothers]

Cornwell and Matco have them. You can’t buy from the manufacturers

[@Mario-xi6yh]

Oh you should see the prices on airplane parts, a tiny 5/16 nut on the torque bar of an ERJ 145 Main wheel costs 100$ and the torque bar is 1,700$ 😅😅😅😅😅😅😅😅😅

[@Sheeeepz]

What screwdriver dividers are those?

[@RageBrothers]

@@Sheeeepz Ernst

[@tonycroteau9264]

Great video 👍

[@packfannumber1]

If you’re a diesel tech that snap on ratchet with the indexing head is worth its weight in gold if you’re doing ford 6 liter IPRs. Thing is tits salad for those.

[@prasadvn524]

I was shocked when I heard the prices of that cummins engine parts.

[@RageBrothers]

Me too

[@adamstarcovic1656]

I have a 9050 for sale! Power blue with battery.

[@RageBrothers]

I need a green one

[@stephaniehang7764]

Nice box

[@superchill27]

Why do people fall for the length, but the dept is on 20” deep. Snap got you guy. That box is so flimsy. Your snap on rep is raping you

[@RageBrothers]

@@superchill27 you sound like an NPC

[@Winner3ty]

Its a tool cart, not a tool box.

[@Apalm12]

Who gives away snap on ratchets lol you have a tool box full of ratchets he’s got two give that man his ratchet back and teach him not to give away ratchets 😂

[@thecardshark227]

Facts 😂😂😂

[@imbowser]

nice box i want to get me one when i get out of prison

[@moo7137]

Get Edgar to clean up his box 🤣🤣🤣🤣

[@geoh7349]

i ordered the same box. when it showed up i immediately sent it back for the $ its highway robbery. thin metal, crappy poorly placed spot welds, horrible slides. I dare you to put more the 100lbs on an open top section.

[@BB-qn5rj]

Matco easily the worst tool truck brand why do y’all even go on the truck lol

[@RageBrothers]

They have some cool exclusive stuff… but I agree Matco overall sucks

[@FrogOff420]

Man, why do you believe everything Mr. Subaru tells you? 😂 Matco is some good shit.

[@BB-qn5rj]

@@FrogOff420 mr Subaru takes loads on his beard

[@Nordman555]

Matco sucks minus their usa ratchets..big fan. Otherwise overprice rebrand

[@Nordman555]

Cameraman is so awesome he was the first one in the shop to buy everything soo cool