Main specs: I56600k @ 4.5ghz Msi gtx970 @ 1.5ghz 8 gigs ddr4 H100i v2 liquid CPU cooler Corsair HAF XB EVO case
Пікірлер: 36
@Rick-kd5gv2 жыл бұрын
be nice if you could of put the 200mm fan name model on the video
@CB-mw5cz4 жыл бұрын
Omfg I have this case!! I didn't know you could put a fan on the top vent! I'm so excited now~
@johnpaulbacon83203 жыл бұрын
Good video.
@jeffreywarf5 жыл бұрын
I can't seem to find any 200mm top fan for this case that has: -Good consumer reviews -rgb (not just one color) -is part of a brand that also has 120mm rgb fans and a controller with a remote for it.
@FordGTmaniac5 жыл бұрын
BitFenix's Spectre Pro RGB series may be your answer. They also have a 230mm fan that'll fit as well, since the mounting holes line up. www.bitfenix.com/products/fan/spectre-pro-rgb/
@Chokluss6 жыл бұрын
nice setup dud, but haf xb is made by cooler master, not corsair. also, could you tell the lightning switch you have?
@Ledface1176 жыл бұрын
Choklo Morgado good catch I will have to fix the description. Also, I think my led controller is made by nzxt. I got it on amazon for pretty cheap. I will double check and get back to you
@Rick-kd5gv2 жыл бұрын
color lights are only good if your high but if you are not maybe you like to heat up your case with all the lights
@Ledface1172 жыл бұрын
They are LED lights so they give off almost no heat. Also there is so much airflow that temps are not an issue at all. Also yes it looks great whilst high
@tanaz59336 жыл бұрын
Hey @Chris Mathy can you tell me how can i find that LED controller
@Ledface1174 жыл бұрын
Rahul Patel Amazon!
@PennyLester6 жыл бұрын
Did you have any issues with the top fan hole alignment?
@Ledface1176 жыл бұрын
Penny Lester I don’t think I did. I remember just screwing it in and the holes aligning rather perfectly.
@PennyLester6 жыл бұрын
Thank you.
@chuckb21752 жыл бұрын
it wont fit my case did you ever figure this out, Thanks
@FskpZ6 жыл бұрын
What Water cooler u use?
@Ledface1176 жыл бұрын
corsair H100i v2
@FskpZ6 жыл бұрын
Can u tell me what dimension si top fan? Thank you.
No problem dude. Take a look at the description for a bit more detail. Let me know if you have any more questions :)
@zetapsi5685 жыл бұрын
Do you know if the new cooler master master air 200mm rgb fan fits? It's the rgb fan included with the h500 series of cases
@Rick-kd5gv2 жыл бұрын
what fan did you use for the top i can not find one that can fit the 200mm holes
@Ledface1172 жыл бұрын
Look up Cooler master megaflow 200
@VividMac1016 жыл бұрын
“Fuckin seizure mode” LOL I’d love to get this case but I’m concerned about it being cramped in this case. I’m used to Mid Towers. Also limited space for CPU air coolers.
@Ledface1176 жыл бұрын
VividMac101 that’s a valid concern. But when everything fits it’s a great case!
@thatonehaven56294 жыл бұрын
How did you connect the led fans to the nzxt box? I do not see a connector for that.
@Ledface1174 жыл бұрын
ThatOneHaven The LED fans are not connected to the NZXT box. They are static red color
@thatonehaven56294 жыл бұрын
Chris Mathy oh I see it now. Thanks!
@mauricobian6 жыл бұрын
Installing that top fan was a bitch for me.
@Ledface1176 жыл бұрын
Mauri Cobian Yea it was tricky. The only bad part is there is no where to route the chord for the top fan. So it's just hanging there
@belligerentinsurgent2 жыл бұрын
pretty... cool? 😏
@montoya58255 жыл бұрын
Rgb nonsense its cool tho
@TheGuyAnonymous6 жыл бұрын
The design isn’t bad but the build quality of that case is shit. I had the pleasure of checking out a system built in that case and it felt cheap, almost like they used very thin gauge steel for the construction. I’m not knocking your build but that case isn’t high quality and I forgot the name of it until I stumbled across your channel.
@Ledface1176 жыл бұрын
Strange, to me the steel seems very solid. I can't really complain about the build quality of my case. Really the only thing I can think of is the plastic mesh for the main intake on the front is a little too big and bulging a tiny bit in the middle. Other than that I think its great. Though I dont have much experience with other PC cases, maybe compared to them its bad, or maybe you are thinking of an older or cheaper version
@thesilentobserver935 жыл бұрын
The build quality is fine. Been using the same case for awhile now, and it hasn't come across as cheap at all. Just an old design, so it doesn't look as fancy as newer cases. As far as the thin construction, this is not abnormal at all. This case gets fairly heavy when there is a full fledged PC inside it. Imagine how much heavier it'd be if the metal was thicker. On top of that, I move mine around and open it up very frequently in order to clean it. No issues, and I'm not super gentle with it. It's a very sturdy case, unless you intend to try to drop kick it.