My crf250l 2017 Arrow X Kone exhaust full system vs standard

Arrows X Kone with Cat. 2017 on Hondas Crf250l vs stock exhaust system.
Soundcheck :)

[@anthonybaltera6556]

that sounds really, really good with the spark arrestor too...damn

[@vamposrr8809]

Magnifique vidéo

[@busfyr1]

Hi. I have the 2017 CRF250L as well. Looking for some exhaust upgrade as well. How does the Arrow feel in terms of power output change to the stock? Thanks

[@lokmanchui6731]

How to install the side cover?

[@Zisch4Bumm]

Besitzt dieser Auspuff eine gültige Zulassung für die Straße?

[@TheSuspact]

Servus! Hab die selbe Honda und habe mir dank deinem Video den selben Auspuff bestellt. Aber sag mal wie hast du die weiße Abdeckung wieder dran gekriegt war da eine extra Geschirr dabei? Oder haste extra gekauft bzw gebastelt? Weil laut vielen anderen Videos und Bildern geht des eigentlich nicht??? 🤔

[@iceegoo3127]

does it have any extra power from upgrading to that

[@nathanhardcastle8767]

Hi, exhaust is good and on my wish list! But could you please tell me which tail tidy (baking sheet holder) you have? I have the uk spec 17 rally and hard to find a tail tidy outside of the US. :( Thank you.

[@kiteshopberlin3209]

i use the R&G sheet holder :)

[@rrmerlin4961]

Hi, looks nice, lim thinking of getting this setup on my Rally, does it feel any better, Power or torque, or is it just louder than stock? You say you have a k&n airfilter, does that make the bike louder, or is there any benefit in power etc?

[@kiteshopberlin3209]

for me the K&N gives a little bit better performance from the engine and makes a better sound. The kombination from K&N and the full exhaust system is very great to ride the bike got more power in the lower speedrange. Gaspulls are very quicker :)

[@carlostrujillo3854]

I haven't found a muffler that I like on the Honda in my opinion they are all too long I prefere a short pipe tucked evenly with the # plate,I'm a welder so guess Il just have 2 find a short can and chop the pipe,and relocate the bracket smh simple fix but just hopped I could have save me the hassle and been a quick bolt up...

[@just-fun-stuff6753]

Wirklich schöne CRF250L, hatte auch mal eine, Top Bike, hat mich nie enttäuscht solange ich es hatte (14000Km). Ein Top mod für das bike ist, ein kleineres Ritzel, ein Zahn weniger und man braucht die Kette nicht wechseln, gab der kleinen deutlich mehr dampf untenraus. Kostet auch nur 10-15€ also ich fand es bei meiner richtig geil.

[@kiteshopberlin3209]

Jo, das habe ich auch schon eingebaut :D

[@hiighkiidzz6340]

Aber dann ist die Höchstgeschwindigkeit nicht mehr so hoch oder?

[@fredlemon4881]

Does it come with a spark arrestor?

[@kevscanada4741]

Did you have to change anything else like air box or ECU ?? Sounds good. I have the 2017 as well 👍

[@looper2006]

Kevs Canada Hi, i change the air filter into a K&N 😊

[@kevscanada4741]

looper2006 Right on. 👍

[@rockthesix7393]

Sounds great! I think the license plate should be bigger, it kinda hard to see. 🤔

[@SketchyKirby]

best sounding exhaust for this bike! does it fit a 13-16 crf250L? did the 2017 change that much? where can I buy in USA

[@kiteshopberlin3209]

The 2017 needs an own exhaust system couse there are some things different between the 13-16 models. in Usa i don`t know i have ordered in Italy. Kind regards

[@ripmax333]

Jesse Ortease the 2017 models have a bigger diameter exhaust, so even as a slip-on this might not fit. But i assume maybe you can drop an e-mail to arrow as ask if it fits.

[@windinthewillows6248]

I'm thinking about the XKone for my 2017 Rally, how much louder is it compared to standard OEM exhaust. I like the look and weight saving, but don't want a too loud bike. Great if you could do ride by videos.

[@kiteshopberlin3209]

the sound is much more than standard... more deeper and much louder ;)

[@titoarifianto2037]

@@kiteshopberlin3209 compare to yosgimura.. Which the best?

[@svendura1]

Sehr interessant. Danke schön für das interessante Video. Ist der Auspuff mit DB-Eater installiert legal? Mit ABE? Und wo bleibt der Katalysator? Gefällt mir sehr gut.

[@sim14.42]

Svenja für Euro 3 ist nur der endtopf zulässig und der kat ist im Verbindungsstück zwischen Auspuff und krümer

[@svendura1]

Danke dir. Aber inzwischen ist ja schon EURO4. Ich guck mal, ob er das auch darf. Cooles Teil

[@sim14.42]

Svenja Nein er darf eben nur euro 3 sonst hätte ich euro 4 geschrieben 🙃

[@kiteshopberlin3209]

hallo Svenja also der Endtopf ist auf jeden Fall zulässig und hat den Kat als einsteckteil integriert. da die Crf euro 4 hat bin ich der Meinung das bleibt auch so... der Krümmer ist ein Teil ohne zulassung allerdings auch nur der Vordere Teil... denn bei der 2017er Crf besteht die Anlage aus 3 Teilen. Das Anschlussstück zwischen Endtopf und Krümmer hat eine E Prüfnummer ;)) grüzi

[@svendura1]

Danke dir für die Info. Sieht gut aus.

[@crazyportuguese2227]

How do you mounted the plastic cover? I have a Leo vince exaust on my CRF but i cant figure out how to ad the plastic

[@kiteshopberlin3209]

ok itry to answer :) the front of the Plastic i fixed with a clamp with a thread in the Middle so ican attach it with a screw ... it works very well... at the back connection i Use a steel Strap with some holes inside.This solution works for over 7 month without any problems... sry about my english^^

[@mando8837]

Nochmal auf Deutsch bitte...wie hast du die Plastik angebracht?

[@jacedillard7683]

Can you get this in America?

[@Tiagof_26]

hi, anyone knows if the slip on can fit the stock header. thanks

[@busfyr1]

Yes it can, but only 2017 and up. Older model had different diameter header

[@Lucas-pc3ej]

Echt mega Video! Von wo haben sie den Kennzeichenhalter? Könnten sie den Auspuff vielleicht verlinken?

[@looper2006]

Hi, das ist der R&G Kennzeichenhalter 👍

[@2wheelAdv]

Looks nice, any idea what the HP and torque gain was?

[@kiteshopberlin3209]

no sorry

[@xSm33Tpm]

Klingt fett! Wo haste den Arrow her?

[@ExoticOnTheBeat]

Did you ever put the header on to? If so, how did you deal with the O2 sensor?

[@kiteshopberlin3209]

what you mean?

[@rockthesix7393]

Nice bike, cool vid!!!! Your country must not allow a license plate. I didn't see one on your bike. 🤔..😆😆😆

[@kiteshopberlin3209]

hehe we only have those biiig ugly baking sheets ^^

[@nestserau]

Did the new exhaust affect fuel consumption in any way? Thank you.

[@kiteshopberlin3209]

ithink no

[@steveh100]

Sounds nice, I put a full arrow system on my 300 rally, looks and sounds a little better, it's not loud, it's road legal and doesn't have the capacity to rust away in 6 months of uk weather like the stock did, it's "homulagated" so acts the same as stock... expensive though lol

[@CHANNEL.BIKE.]

Bonjour, c'est quoi ton support de plaque et le feu arrière s'il te plaît?

[@kiteshopberlin3209]

from R&G

[@CHANNEL.BIKE.]

Kiteshop Berlin Merci ;) 👍

[@MotorradAbhaengig]

glaube sollte meinen topf auch tauschen ... :D

[@kiteshopberlin3209]

sehr zu empfehlen :P

[@JD-cx1pg]

@@kiteshopberlin3209 wieviel hast bezahlt dafür ?

[@aditoas5089]

Hi I've got the same 2017 crf250l and have just fit the same arrow exhaust, do you run a fuel controller? Or has it been ok with out!

[@kiteshopberlin3209]

i dont juse something like that but i think the ejk controller will be a good thing to round it up. ;)

[@juliusbaumgartner5361]

Wo hast du den gekauft und wie heißt deine Kennzeichenhalterung?

[@kiteshopberlin3209]

Bei nem Italienischem Händler ... das ist das R&G Heck ;)

[@kiteshopberlin3209]

Yes its a K&N too do you have any Ideas for AIrbox modding.

[@screamingmachine925]

Oh, just a few question : - Which plate holder are you using ? - is the blinkers/turn signal coming from CRF250 Rally ? - and finally, how do you replace the stock white heat shield ? Thank you.

[@kiteshopberlin3209]

Hi its the R&G plateholder and its a very good part.It fits very well. The blinkers/turn signal are tuning parts from louis and the the stock heat shield are fixed with some holestripe. Not the best way but it works. Kind regards :)

[@screamingmachine925]

Hi, thanks for the reply. I went with this full X Kone system. It has been installed yesteday. I put the db killer off, just out of curiosity : damn crazy sound o_O'. Police won't approve, I'll put the db killer back. Best regards.

[@looper2006]

Screaming Machine ...thats so loud without the db killer haha very crazy 😁

[@screamingmachine925]

Yes, very, very loud. Furthermore, the Icon Variant helmet isn't very soundproof. I wear ear plugs with this exhaust. But, I noticed that with no DB killer, car's driver are more careful now.

[@heckler1379]

Hat die Komplette Anlage Eine ABE?

[@kiteshopberlin3209]

der Krümmer nicht

[@juliusbaumgartner5361]

Hast du den krümmer eingetragen?

[@kiteshopberlin3209]

nein bisher nicht

[@ahmetoguzz]

i love your tail light pls link ?

[@waterstyle3099]

www.ctc-bikeparts.de/X-LEDIND-60-Sequentieller-LED-Blinker-Lauflichtblinker?gclid=Cj0KCQjw6IfoBRCiARIsAF6q06tteo6uu99hvBXo_6TKaHtNkN-QUNOFoB2wWoUp3JFk84ib2py183MaAgF-EALw_wcB

[@ahmetoguzz]

@@waterstyle3099 i said tail light, so brake light

[@waterstyle3099]

@@ahmetoguzz R&G is the Name

[@ripmax333]

IMO the stock exhaust of the 2017 models sounds very nice, much much better than my 2014 model. It's really a nice improvement. Dont get me wrong, the arrow sounds nice but i know that for me the sound will become obnoxious.