My dream workshop - building bifold gate - part.2

[@einanderer5549]

Absolutly great Project. This one will stand the next Worldwar :) Great Respect for that!!!

[@mateuszturek5760]

thank you 😉 it actually feels like an armored one 😃

[@vtyurin4489]

Эти ворота будут жить 100500 лет☝️👍💪

[@calf6349]

I am just a country boy from the plains of Colorado. Watching this video is like watching Vincent van Gogh paint "The Starry Night". His workmanship exceeds craftsmanship and tops at as an artisan ! The tools he used were quality. None of them were extravagant, just good ole every day workin' tools. Wow!

[@mateuszturek5760]

I'm very pleased, Thank you!

[@loft306]

Yes!

[@lesnic_mgn]

I've watched your video several times over the past two years. Every time I note for myself new details in the design. Now I finally understood what the second tape and rollers in the middle of the gate opening are for. It's an amazing idea.

[@humbertholzmann674]

hat off. stunning project. it includes ingegnery, every construction branch and original craftman ship. I'am speechless. You should do enginering over the world. Bravissimo. Greetings from Italy

[@mateuszturek5760]

Thank You, I'm very pleased😃

[@TrailTrackers]

While watching Part 1 I thought, "This guy is good". ... While watching Part 2 I thought, "This guy is awesome". ... Then, when I saw him make his own springs I thought, "This guy has reached God level". Totally awesome build!!!

[@mateuszturek5760]

Thank you for the motivation! Regards!

[@ВіталійСуровикін]

Сколько работы?Похвально!!!По моему дешевле было купить готовые ралеты!!!!

[@alessandrostefano5160]

Penso sia uno dei migliori progetti presenti in rete che abbia mai visto con attrezzature alla portata di tanti. CONGRATULAZIONI

[@mateuszturek5760]

Sono molto contento, grazie mille 🤩

[@stevenrichardson6793]

Excellent craftsmanship and design! Thanks for sharing. 👍

[@robertgilmour1903]

Thanks for putting this on youtube I enjoyed watching it.

[@mateuszturek5760]

here you are, I'm glad you liked it 🙂

[@kholislas2395]

Teknik dan kerja bagus. Sukses selalu. Kawan

[@mateuszturek5760]

Terima kasih 😃

[@loft306]

There are very few Fab videos that I watch all the way through while this does not exactly apply to me. Thanks for the ideas. And yes I watched part 1.

[@GeorgiSaykov]

That was one of the most complicated and professionally executed examples of diy :) Good luck with your next projects!

[@mateuszturek5760]

I am very pleased, thank you very much! and the next project is already in progress, I will probably release its first part soon, so feel free to subscribe! ;)

[@jesuspincho2201]

Pedazo de puerta si señor, la mejor puerta y el mejor trabajo que visto en hace bastante tiempo

[@mateuszturek5760]

Gracias, mucho gusto😃

[@kolbakolba]

Super sprawa gdy w garażu stoi podnośnik kolumnowy.

[@jerrellkull5347]

Outstanding craftsmanship!

[@hogejo]

Holding the way too short rods while TIG welding with bare hands. You got balls my engineer friend! :D

[@mateuszturek5760]

Haha😄

[@KUATo365]

С подтяжкой ворот тоже бьюсь давно!но делал на вело-цепях или тросах.но у меня отдельный эл.мотор дотягивает

[@Frank-bh3cm]

Talented beyond believe. If you really want to grow this channel, tell us what you're doing and why (in english = biggest audience).

[@tmanda323]

for this job LIKE is nothing. I am impressed

[@mateuszturek5760]

It is thanks to such motivating comments as this one that I record videos, Thank you very much!🤩

[@tmanda323]

@@mateuszturek5760 Hello from Serbia, stay well

[@mateuszturek5760]

@@tmanda323 Hello from Poland, Regards!🖐

[@robolop]

You are a genius. I've looked at everything you've made. Lathe and so on. I learned a lot today. Thanks for posting your videos. RESPECT

[@mateuszturek5760]

Thank you very much! thanks to the fact that you are another person who likes my materials, I have the strength to record more videos! And my channel is growing stronger!

[@robolop]

@@mateuszturek5760 Your channel and that of Ca' Lem and TheMetalRaymond are for me the top 3 channels related to metalwork.

[@allenzackery1639]

I see some of those moving parts hidden in the side of the wall something like a pocket door ? Nice job 👍

[@mateuszturek5760]

which parts are you asking? Thank You 😃

[@vsemizvestno]

Man, you are realy mechanical genius!

[@mateuszturek5760]

Thank you very much🤩🙏😃🖐

[@Roger-ie2hp]

Great. Your skill and attention to detail is exceptional. I also like the design concept.

[@mateuszturek5760]

thank you 🙂 I'm glad you like it😃

[@bobpomfret5679]

Fantastic thought process, followed by a fantastic build. I suppose it had be be a BESPOKE PIECE OF WORK. It must have cost a few Euros though. Well done that Man !!

[@mateuszturek5760]

after using the translator I'm not sure what you mean with PERSONALIZATION anyway thank you very much and glad you like it. When it comes to costs, I did not calculate this project in the end, but when I was building 1.5 years ago, the materials were much cheaper and I think it was around 1k €. Thank you again🙂

[@tesfayt5243]

Well done .amazing gate , is that the only door you have you might need utility door as well.

[@mateuszturek5760]

thank you, and don't worry, I have a second door at the other end of the workshop 😉

[@davidschwartz5127]

Terrific build. Can it be opened should you be without electricity for to your shop for an extended period.

[@mateuszturek5760]

currently not, but I was thinking about making a system that would make it possible

[@ShainAndrews]

Interesting solution. I like seeing how people approach things differently. Nice solution you came up with.

[@mateuszturek5760]

I'm glad that you like my workmanship, the concept of a horizontal door is not my idea, of course they have been used for years, but the structure itself was my idea, and most of all the tensioner system 😉 Thank you😃

[@Whitefirekith]

Now that is a sweet shop door! I like the overhang for shade! Great job!

[@mateuszturek5760]

Thank You!😃

[@ravscin]

Super. Fajnie skręcony filmik - czyli 2 w 1 🤣

[@davidmiddleton3511]

Good job some great workmanship.

[@mateuszturek5760]

Thank You 😃

[@jean-louisschneider6342]

Un formidable travail très belle porte était bonne réalisation un coup de maître bravo

[@mateuszturek5760]

merci beaucoup 🤩

[@PiotrSkoczylas]

Ja pierniczę - SZACUN !!!

[@mateuszturek5760]

Dziękuję 😃

[@naderfawzy5958]

Gut gemacht

[@mateuszturek5760]

Danke 😉

[@GulliJ]

I love it ! Well done ! Would like to see wall sign and pavement outside for a professional look, but this door have its place in industrial gold period 👍👍 Cheers 🇲🇫

[@mateuszturek5760]

Thank You! 😀

[@MrCarmelo1959]

Thanks I was looking for the parts list links for switches you used not having this knowledge would’ve been great thanks

[@mateuszturek5760]

I bought all the parts locally, or on the Polish stock site, I think you can get them more easily by searching nearby by names or on websites in your country, nevertheless I will send you links to example sites, what exactly do you need? 🙂

[@KBerny63]

Complimenti ! Davvero ingegnoso !!!

[@mateuszturek5760]

grazie mille!😀

[@НиколайСметанин-р7о]

Молодец! Уважуха!

[@alexzakharov4353]

Yes buddy it’s amazing mind set in this kind of job! Genius! Practical how much would you charge for gate like this? 20,000$ ????and how long it’s taking to make parts? It’s looking amazing but only if you do it for your self and and not counting time for money

[@mateuszturek5760]

Thank you😊 obviously, it took a long time to build this gate, the material for it was much cheaper than buying a factory-made paneled gate that wouldn't even wash into this one. And I do not count the time, because making such structures is my passion anyway 😉

[@chandravelaga1]

really amaaazed by your end to end full fab work.

[@mateuszturek5760]

Thank You 😃

[@jemol5034]

Świetna robota! Gerda się chowa 😉 Dodał bym jeszcze jedną rzecz... 2 bolce na elektromagnesy trzymające chodź część tych 300kg przy otwartej bramie. Z jednej strony odciąży silnik a z drugiej nie chciał bym być pod tą bramą jak nie daj Boże kołki lub łańcuch by puściły. Leci łapa w górę!!!

[@mateuszturek5760]

Dziękuję 😃 zgadza się, będę robił dodatkowe zabezpieczenia, właśnie przez elektromagnesy lub jakiś system zapadkowy, kiedyś powstanie kolejny film z aktualizacji 😉

[@Merkury1978]

Przydały by się dodatkowe rolki na dole nad szpulą bo pas trze o bramę i się z czasem może wytrzeć. Brama pancerna

[@mateuszturek5760]

Zgadza się, przewidzialem tam coś w rodzaju ślizgu, lub rolki ewentualnie, dziękuję 👍😃

[@BoraHorzaGobuchul]

I just love it when people overengineer the f*#k out of things. Once you add the extra safety mechanisms you apparently have plans for, this will be a true work of art that might end up in some museum a couple of centuries later :)

[@jeeptrucklover72]

Wow!!! Amazing work!!! You should be proud of those bi-fold doors, because I doubt you’ll ever have trouble with them. Great job!

[@mateuszturek5760]

Thank you very much 😃

[@tomwilkinson2184]

Thanks for sharing this ! Awesome Job

[@mateuszturek5760]

Thank You 🤩

[@rreklama]

Подпружиненные катушки снизу добавлены для того что-бы ремни в процессе работы не болтались свободно, правильно?

[@mateuszturek5760]

правильно, подтягивают ремень, который разболтался

[@peterenns2245]

der alleine kann Werkstatt mit fünf Kollegen ersetzen, bombastische Leistung.

[@mauroconstru2040]

muy bueno!!. un piñon mas chico al motor. lo aria mas rapido al recorido???. igual excelente!!

[@mateuszturek5760]

Gracias 😃 la rueda más pequeña ralentizaría aún más el accionamiento, ahora va montada en el motor con rueda 20z, y en el eje 40z, la puerta abre 40 segundos, originalmente ambas ruedas eran 40z y la puerta abría 20 segundos, pero hubo un problema con un tirón al comienzo de la apertura. En última instancia, usará un mecanismo que alejará la compuerta para eliminar el tirón y volverá a montar la rueda 40z en el motor 😉

[@patricktyra7316]

on the upper hinge i would suggest boltin all the way through with a good size backer plate , alot of stress there when the gate is up

[@mateuszturek5760]

I did not understand exactly what you mean with the plate, but you are right about the stresses, when opening to the very top, there are most of them

[@DeonisDan]

Отличная работа! 👏

[@mohamedseghir6362]

you really are a genius

[@mateuszturek5760]

Thank You 🤩

[@ugotomas9912]

Дякую! Гарна робота!

[@yomantimothy1927]

Very hard work Weldon

[@mohamedkouryani5690]

عمل رائع الله يحفظك فنان مع أن طريقة عمل معقدة شيء ما 🙏🙏🙏🙏🤛🤜🤛🤜🤛🤜

[@mateuszturek5760]

شكرا جزيلا 🙏🙂

[@martinsparks6410]

very talented guy

[@geraldwenn9698]

I would of use fridge pannels thats far to heavy always going to be issues good machinist

[@ххх-й6й9л]

Просто золотые руки😳👍⭐

[@thecomanchekid]

Super cool, and the fact that you made everything yourself is awesome. However, I like looking at it on your shop more than I would want it haha. Super involved, many moving bespoke parts, many failure points. If something breaks it could be bad due to the weight of the door. But, I still like it a lot and admire the work and skill

[@mateuszturek5760]

Thank You 😃

[@Gastell0]

Great project, certainly provides with some more insight and ideas for our project for a garage door (unusual one due to sheer size of the opening and it being a listed building)

[@mateuszturek5760]

Thank you, will you build a similar gate? what will be the dimensions? And what is this building?

[@Gastell0]

@@mateuszturek5760 Similar that it'll need a metal frame very similar by depth and composition, but I'll be a large horizontal gate, with narrower second half (width of a door). And a swinging up part for full width on top of it all not attached to either, i.e. swinging parts all attached to walls. The gate opening is 3x3 meters in the old German barn that is part of the house , so we'll need to decorate it from outside to look like a barn door

[@mateuszturek5760]

@@Gastell0 ok, but it will be similar, mine is also ~ 3x3m, you can clad the face of the gate with wood

[@tomlee7966]

great job very talented

[@mateuszturek5760]

Thank You!🙂

[@dwaynelejeune3508]

Now I luv that Hard to follow on build, would you have plans on build, I’d be real interested on purchasing a set?

[@mateuszturek5760]

Unfortunately, I don't have any plans, I didn't have them at all, I built them "from my head", I only drew the details on a piece of paper, analyzing whether everything would work out. I'll be happy to help if you have any questions

[@drumnmax4436]

Ай-да молодец 👏🏻

[@norbertcoatelen720]

tres beau travail , felicitation et admiration

[@mateuszturek5760]

Merci😃

[@tigxxl]

Bardzo ładne wykonanie, beż żadnej rzeźby. Już po twojej tokarni widać że wiesz co robisz! :D Pozdrawiam, powodzenia i oby tak dalej. p.s. wyciągarka w busie bardzo, bardzo sprytnie :D

[@mateuszturek5760]

Dziękuję, i cieszę się że Ci się podoba, owszem wyciagarka robi robotę, jej pierwotną rolą było wciaganie łodzi na wózku, (zobacz filmy o mojej łodzi) później wciagalem nią kłody, takie "małe" około tony 😎 no a do dziś to bramy i wszystko inne 😃 Pozdrawiam🖐

[@吳平和-c4t]

@@mateuszturek5760 212

[@mateuszturek5760]

@@吳平和-c4t ?

[@raffaeleromagnuolo2167]

Lavoro stupendo.

[@mateuszturek5760]

grazie😃

[@abdalrahmanahmad8540]

هذا عمل جيد جدا ولكن ينقصه منظومة فتح وغلق يدوية ماذا تفعل حين تنقطع الكهرباء او حدث عطل

[@paulusmarc]

Bon boulo 😀😀👍👍

[@loloblanc04]

Impressionnant, bravo !

[@mateuszturek5760]

Merci!😉

[@FirstName-qq6rq]

Great work, however, it is very heavy. Why not to use PIR/PUR panels in light weight aluminium frame?

[@mateuszturek5760]

Thank you, in fact, next time I would make it in a different way, not even from aluminum, which is not the cheapest, and from profiles bent c very thin (about 1mm) sheet metal ;)

[@MrVario777]

Great job! But some things imho are unnecessarily complicated ) Like you're preparing for the nuclear war or zombie apocalypse :)

[@mateuszturek5760]

Haha 😅 Thank You😄

[@TheOneshot78]

Wow thats awesome

[@Htoon2008]

Amazing job!

[@edwinri]

Te felicito, excelente trabajo.

[@mateuszturek5760]

Muchísimas gracias🙂

[@LasuU05]

Dobry patent z tym centrowaniem elementu...

[@rezaallahdadi7698]

This door is very heavy. Have you thought about when the power goes out? For example, the workshop is on fire and the electricity is cut off, and you want to save your life and that of others. Is it possible to open the door without the power of the gearbox?

[@mateuszturek5760]

the general answer is - NO, but in such a situation I would just leave through the door 😉 which is on the other side of the workshop, besides there are 5 more windows in it 😁

[@MaA-he9sj]

Awesome 👍🇬🇧

[@kayodeidowu8450]

FANTASTIC

[@bodzior3716]

Świetna praca, precyzja i estetyka. Czy wykonując kolejną bramę wprowadził byś jakieś modyfikacje w kierunku odchudzenia skrzydeł? Pozdrawiam

[@mateuszturek5760]

Dziękuję bardzo 🙂 tak, zastosował bym na konstrukcje skrzydeł zamiast płaskownikow profil wygiety z blachy 1,5 maks 2mm i pozostawił bym grubość bez zmian, lub ewentualnie konstrukcja taka sama lecz z płaskownikow 60x4 i mniej poprzeczek wewnątrz. Przy dobrej izolacji, mam na myśli dobrze zbitej bez wolnych przestrzeni, wystarczyła by jedna lub dwie poprzeczki pionowe dla usztywnienia blachy zewnetrznej, a i tak powstala by sztywna płyta warstwowa. Pozdrawiam🙂

[@aungzin6825]

100% top job.

[@mateuszturek5760]

Thank You 🤩

[@MrX-gg4gr]

Nice There must be safety Lock if the belt is cut .

[@conceptgaraz828]

Super projekt. Napracowałeś się .

[@mateuszturek5760]

Dziękuję 😃 no było "troszkę" pracy przy niej 😉

[@conceptgaraz828]

@@mateuszturek5760 sam chcialem taką robic stanęlo na tym że za dużo roboty i ograniczony budżet więc wkońcu zabralem się za dwuskrzydłową rozwierną

[@mateuszturek5760]

@@conceptgaraz828 no faktycznie chcąc coś zrobić dobrze trzeba poświęcić dużo czasu, co do kosztów to wyszło nieco ponad połowę ceny kupna bramy panelowej

[@conceptgaraz828]

@@mateuszturek5760 rozumiem mnie też ogrnicza czas więc stanęlo na rozwierną prostą

[@mateuszturek5760]

@@conceptgaraz828 czasami trzeba z czegoś zrezygnować aby wogole ZDĄŻYĆ zrobić cokolwiek na czas

[@jesusmarte1880]

fantástico trabajo

[@iguana1234567891011]

te felicito muy buen proyecto

[@mateuszturek5760]

gracias🙂

[@dimooonz]

сколько деталей!!!!!!!!!!!!!!!! офигеть!

[@mateuszturek5760]

нужно было добиться желаемого эффекта 😎

[@lucjanszulik7354]

Jeśli coś by naruszyło fundamenty kiedyś, to dom Ci się lekko utrzyma na tej bramie :P

[@mateuszturek5760]

Hah😁

[@snakeplizzkn2113]

Beautiful work. 👍

[@mateuszturek5760]

Thank You!

[@johnsingleton2001]

Amazing job , great engineering and a credit to your skills but shame about the garage

[@mateuszturek5760]

Thank you, but what do you mean when you write about the garage?

[@johnsingleton2001]

@@mateuszturek5760 ,sorry wasn't being judgemental but the garage didn't look all that big and you built a great door meant for a huge modern multi car'd all singing all dancing workshop. Maybe I should just wait until you have finished the whole project.

[@mateuszturek5760]

@@johnsingleton2001 watch this video, I'm working on it kzbin.info/www/bejne/n6bRe3V6fsuLqa8

[@kochanek93]

Imponujące, bardzo ciekawe wrota.

[@TheNorthernmunky]

Brilliant work

[@mateuszturek5760]

Thank You 🙂

[@쨈따방송]

오 머찌당 굿~~

[@mateuszturek5760]

감사합니다

[@vladimirmelnik6289]

Super!

[@bovkunanton325]

Hey! An excellent project! I hope there will be a video with a detailed overview of the mechanisms and spare parts? Perhaps there are any drawings or everything was done "by eye"?

[@mateuszturek5760]

Thank you, I think that when there are a few more updates, I will record such a film, I did the whole project "out of my head" without projects

[@bovkunanton325]

@@mateuszturek5760 looking forward to

[@ДмитрийРезников-б9щ]

Внешний вид получился отличный. Но вот механика не стоит тех трудов. Есть готовые комплекты. Дорхан алютех найс

[@piksiak1]

Brama wygląda na bardzo ciężką, czy są jakieś zabezpieczenia w przypadku zerwania się tych pasów?

[@mateuszturek5760]

Owszem lekka nie jest, aczkolwiek z punktu patrzenia na wytrzymalosc pasów to piórko, oba skrzydła co prawda ważą 310kg, ale producent podaje nosnosc pojedynczego pasa na 3500kg, a zrywanie przy 7000kg... pasy są dwa więc teoretycznie zerwały by się dopiero pod obciążeniem 14000kg... a tu mamy zaledwie 310, i to nie do końca, bo czym skrzydła są wyżej tym więcej obciążenia przekazywane jest na oscieznice i zawiasy. Tak więc zerwanie pasów to ostatnie co mogło by się wydarzyć z niechcianych i potencjalnych zdarzeń 😉 A i co najważniejsze, zerwanie obu jednocześnie to już wogole abstrakcja, a na jednym pasie brama już bez problemu pracowała, gdy powstawała. Tak więc odpowiadając na pytanie czy są ku temu jakieś zabezpieczenia - nie ma, aczkolwiek oczywiście POWINNY BYC 😉 Pozdrawiam serdecznie 👋

[@avtk1989]

Золотые руки. Но и вороты вышли золотыми...

[@planespeaking]

Great video but I gotta say the Tecno got to me after a bit.

[@kvcali2016v]

how many kilowatts is the electric motor and how many revolutions does the reducer have

[@mateuszturek5760]

the motor has a power of 0.55 kW, and the gearbox is about 1:20-30, I don't remember, I'll check soon and give an answer ;)

[@riccardoceron3872]

🤩🤩 Complimenti 👏👏👍👍👍 tanto lavoro 🥵🥵

[@mateuszturek5760]

Grazie mille😃😃

[@rhoderickpaladmartinez4579]

Great job, great skills 👌👌👌

[@uvlynthorayan6088]

Very well done sir ! I'm impressed

[@mateuszturek5760]

thank you very much, I am very pleased 😃

[@jankydlicek3646]

Super práce. Máte šikovné ruce 👍👌

[@mateuszturek5760]

děkuji 😃