My F100 Hits The Streets on SLICKS!

GRAB YOUR RESTOCKED NINEONINE MERCH HERE!
SHOP NOW: www.nineoninespeedcompany.com/
-
Check out Heatwave Visual HERE!
heatwavevisual.com/
-
Companies involved:
-Holley Performance:
www.holley.com/
-RaceTec:
racetecpistons.com/
-SCAT Crankshafts:
www.scatcrankshafts.com/
-ICE IGNITION:
www.iceignition.com/
-Meziere Enterprices:
www.meziere.com/
-Heatshield Products:
www.heatshieldproducts.com/
March Performance:
marchperformance.com/
-Anderson Motorsports:
marchperformance.com/
-Air Flow Research:
www.airflowresearch.com/
-
FOLLOW ME ON INSTAGRAM!
@thecraig909
@carrnagge
-
SEND ME STUFF! (If you want)
TheCraig909
P.O. Box 362
Ramona, Ca
92065
-
Check out these Classic Uploads!
-Open Headers High School's Reaction!
• Open Headers High Scho...
-Pulling A Rare Jeep From The Weeds!
• Pulling A Rare Jeep Fr...
-My F100 NASCAR Conversion Is FINISHED!
• My F100 NASCAR Convers...
-My F100 SHUTS DOWN AN IMPORT MEET!!! CRAZY FIRE
• My F100 SHUTS DOWN AN ...
-We Found a RARE SVT SUPERCHARGER In The JUNKYARD! Best Junkyard Find Yet!
• We Found a RARE SVT SU...

[@Thecraig909]

Our "Small Block Killer" Tee was just RESTOCKED! Grab one HERE! www.nineoninespeedcompany.com/

[@fuzzypotato6862]

Sounds good and seems like it rips too. Those tires look good on it, it’s a good look 👀

[@TerrinLee]

You inspire me so much for my build. I look forward to every new video with your truck. It's such a beast.

[@krisjenkins4040]

Man, you gotta get an wideband gauge for that thing. You definitely need to know if it's leaning out or not, especially when you're foot is in it. Just something to think about. 👍

[@johnyreb5464]

If you know how to read your plugs you don't need a gauge to tell u if you are fat or lean old school

[@Terruhcutta]

​@@johnyreb5464unless it happens mid pull 🙄

[@hoost3056]

That's how dude nuked the last engine. I'm all for making content but blowing stuff up needlessly gets old and expensive

[@jacobstrouble7666]

Somewhere in Oklahoma there's a farm truck waitin on ya.... but I love what you did here, good job and even better idea.

[@lukaswahlback8309]

15:17 cone flip

[@blakeholloway9311]

I bought a Softtopper for my 68 and absolutely love it! The old shells are nice, but so much more convenient with the soft top!

[@darkwolfvideos763]

Always look forward to your videos, especially the f100. Given me alot of inspiration and ideas for my 1964 Thunderbird with a 390 FE.

[@chevelle19721]

For radiators the most important thing is the tube size. Aluminum radiators can be made with much larger tube sizes than copper/brass radiators and the aluminum radiators can use fins that aren't as tall so you can get more tubes in a given height!

[@HammerPowered]

12:04 - I think us as gearheads now have a level of obligation to pass our love on to the future generation. The hobby will die out for sure if we don't. For me it's lifted 4x4, but that's the same general thing I go for in life. Better than any trophy.

[@mikepoint4717]

I absolutely love that truck , it’s so rowdy and the exhaust is sick !!! . Cheers 🇨🇦

[@mbyrd6580]

Sounds soooo bad ass, love the videos kepp on keepin on brother!

[@pingpong4016]

This is legit the only car vlog I follow. Man this truck is sick

[@stevenbitter9241]

Always great content. Nice job

[@darrenrevill8664]

You've come along way. Keep at it😎

[@gabenieto3113]

I still remember seeing One of your highschool drag videos a while back I was probably in 7th grade and it inspired me to build my 72 Capri it's amazing to see how far the f100 has come

[@waterislife.9204]

Epic sound. Nice gathering.

[@caseyspeer8179]

I can't get I can't get over how that thing sounds love it

[@fordtechlife]

That thing is a absolute Beast love the set up I wanna do my 65 fastback with that water pump and alt set up 🐎🔧🚗🇺🇸🏁🙌

[@bobmanzi7712]

Great stuff thanks

[@bigdaddy3955]

Best sounding truck on you tube!

[@jordanlohr4798]

It was sweet getting to see this at Cruisin the Grand. I was wondering when I’d see this thing pull up

[@yamahaxs6501]

The way the power comes on like a light switch is awesome! It's like my two stroke MX bike.

[@jessegoldston70]

Yes indeed Awesome but did not get the Crewcab and TourM8R together, hope more content on the Crewcab soon

[@2000blackstang]

Damn i love my fords and my 5.0's! That sounds so good! I think I'm going to take off the Flowmaster and put the black widows on my mustang!

[@GiancarloFloyd]

My favorite truck on KZbin.

[@chrisk6414]

That is hands down the sickest Ford I have ever seen.….or heard….

[@chemx__O__o]

Looking good man!

[@user-cg1hx8dq3l]

Awesome

[@williamsanders468]

So if it has a race engine does that mean Mater is a race truck? Helll yeah brother

[@user-kp4or7nz2k]

That is so cool

[@jimsloan8549]

I grew up in Southern California camping with the folks in a Gem Top topper like that. Hi from Anchorage Alaska. Jim

[@FordEra]

Frick Yea Dude!!

[@mplante7352]

I didn't see a wideband installed Craig, cheap insurance dude.

[@davidforsman5973]

I'd like to see one of these trucks like yours with a Cleveland in it.

[@user-lo1qj7hd5c]

The signatures of Freiburger and Dulcich are priceless 😊

[@HansenSpeedShop]

Ethans truck is so freaking money! :O

[@somebodyelse5820]

The starter solenoid is still upside down homie

[@juliancrum6998]

damn that truck is all some

[@devilsadvocate1441]

I cant remember his name. But that kid in thr hiboy always cracks me up 😂

[@4SpeedGarage]

It’s me. Ethan

[@jacobdixon3299]

that truck sounds mean as hell

[@3wheelslifelonglivetheatc559]

Your camera guy is all over the place you get like a 2 second glimps of everything lmao

[@DejonColeman94]

Spicy 🌶️

[@mitchhuested6244]

Craig, hope you're running break-in oil in your truck. Also, since you must have missed my last comment, I'd like the P/N's for your radiator/fan/shroud so I can use the same for mine. Thanks,

[@bigbow62]

Hey Craig... the truck looks and sounds wicked very wicked ! Easy on those 6500RPM pulls... the reason I say 6500 because you'll see 6800 and then say well 7K is right there so like I said easy on those 6500 RPM pulls 😉 Now for that race engine excuse... for sure its one bad azz built race engine man but you are on the street so be careful, now when you hit a circuit track or local 1320' Let Her Eat & keep the tach needle near 7 😊

[@chevys10v8]

what size tires you got on that truck love the way they look on it!!

[@LATRONNIK]

These nascar style tires look so fucking good on anything you put them on

[@bryanbailey961]

BAD ASS TRUCK

[@ChrisRaspanteMusic]

This makes me wanna finally get my mustang done

[@superinnovated]

Do you ever build FE 390 or do you prefer small block. I like your engine could share the specs of the. Engine in your truck is the engine full roller. What cam combo like

[@PrincessTS01]

have you seen the old comedian ron white do his tater salad skit, lol this truck plates made me think of it...

[@jamessalter676]

Sounds so freaking nasty ❤

[@watahyahknow]

friend of mine had build a remote turbo on his truck (right behind the cab under the bed ) , and to keep the heat in the exhaust he had wrapped them in headerwrap all the way to the turbo , he had a small oilleak leak oil on that headerwrap and it gotten so hot it caught fire one day people passing him honking and pointing and stuff untill he notices the smoke he managed to get off the highway and get it out by trowing sand against it after he emptied his fire extinguisher on it but it cured him of using the stuff on a daily driver truck be carefull with oilsoaked headerwrap

[@ryurc3033]

People don't seem to understand how to break in a motor. How many guys have even had their motor on a Dyno before it's installed in the car? Do you even know what's happening to an engine on a Dyno? All the rpm, and a load against it to measure how much work it puts in, right after the first warm up. Every engine I've actually seen built, or done myself was assembled, warmed up to full temp once, maybe 10-15 minutes, (1500-2000 for flat tappet cams) and then driven....hard. drive it how your going to use it. If an engine was on the Dyno, it's already "broken in....". Drift rc stuff is a riot. so much fun pr dollar. My son is 11 so we have several drift cars, drag cars, and rock crawlers. Highly recommend Sakura D3, good platform with lots of aftermarket support, hobbywing 7000+ kv brushless motor, and find a high speed servo(reefs, Holmes hobbies, 3 brothers all make really solid servos) for steering and pick any body you want. There are endless options from several companies.

[@robynmorrison7410]

When are you going to do the crew cab prerunner?

[@aidandickerson275]

I’m looking to get a 62 mercury and put my 5.0 from my first bronco that I rolled in it hopefully I’ll run into u at a show so I can show it off

[@KARR]

Damn dude your truck sounds good as fuck

[@berserkir]

I think the High boy looks WAY cooler with the camper shell and Bias Ply tires! BTW Craig I have seen people ripping off your content on Tik Tok, I'm always giving you credit/shout out your channel in the comments though

[@ls1_cammeroh]

What exhaust are you running?

[@conmancollins1176]

Cool to see the 71 next to the 69 ngl wish the 69 had the 71 grill would look way cooler

[@paulspangler2088]

What mufflers are you using?

[@Cobrajamie]

I love that old school steering wheel who makes it?

[@flipflopsgarage]

I've got to get out to some car shows

[@mario-sl6cz]

Dude I want this engine in my 94 f150 lol

[@travis9928]

Only doing it when it warms up is more than likely the exhaust above anything else that’s just my opinion

[@THE_Tyler_Rogers]

So relieved to know it’s a sponsor making you wear those glasses 😂

[@stewartfoster6581]

I agree, there couldn't be any other logical reason...

[@alltherpm]

I have same problem, hard to keep her under 7000, my stocky turns 8700

[@deleted....2000]

What motor is in your f100

[@jeffrey4547]

hat i did was get a set of 16.5 rims then i can get military tires for 25 bucks with about 70% rubber 36.5 x 16.5 for my 70 high boy

[@89Interceptor]

seeing you smash your forehead on the camper shell reminded me of all the times i slammed my head into a lift at work

[@dontinsley1451]

I gotta ask how you getting away with your loud mufflers i grew up in the seventys as a teenager i used to caught in them chp road blocks all the time and get fixit tickets i know cali has new rules on loud mufflers just curious

[@ajnevitt]

Old cars are exempt. It’s awesome

[@berserkir]

Pre 74 😢 guess my 76 is just a fancy new truck

[@EB240]

Holy sunglasses batman.

[@foggmedia7437]

it’s like how he says it tour mater without the tour

[@ephenj]

Sounds better than good

[@twistenthrottle1698]

Do they make tear offs for the glasses look like goggles

[@chrisleeder8243]

Is the carb to big? That might be the noise

[@travis9928]

It’s the build that makes a good motor if you build it right,breaking it in, means nothing

[@MikeKinard-sj3vy]

You making me want to fix my 302? Do you have a fine truck love street Korea?

[@thegraystang66]

I think you hit your 7 likes lol

[@caseyspeer8179]

Love the contact why you got more than 7 likes looks like you're building a drift track

[@rawdyrider]

The fact of the matter is that a new engine has to be run in.Simple!You just can’t start revving it up before the rings and pistons have seated. At least a 1000 miles and if possible after first start let it idle with a fan blowing at the rad,for 4/6 hours.That’s how you “hone”it in boy

[@henrysmith8012]

😂

[@kaveendakshitha5971]

Camera man sucks🥲💔

[@jblspeakersandmore277]

Wait nobody said nothing about him running over the cone and it stood back up😭

[@alexharshman7025]

Still the best headliner ever

[@jcnpresser]

Shoot, I’d say she’s broke in enough, roller cam, your good.

[@SantiSpeed1]

The high boy looks better with the cap, sorry lol

[@maxfalkner8849]

Are we not gonna talk about the highboy running over the cone and flipping it back up? No? Okay.

[@cwbintn8949]

A big black spare caulk

[@jss6060]

I thought the plate meant terminator before you explained

[@nittygrittygarage5497]

Oh Craig of the California, what is your wisdom?

[@sugarmakinmonkey]

Shame on you letting the Rust Mites out of your hood around those clean cars. LOL LOL LOL

[@matthewchurch1320]

for what it has cost to build a few 302s he could have ordered a new from ford 302

[@MikeKinard-sj3vy]

I have a 1975 F 100 long bed. My purchase to truck your watch 3 only 3. Now it's 4 on the floor motorcycle shopped at the car vaccine. Go get ronced OK Belmont to put a big box about a truck camper special 72 with a 390 big log. Go on to do an entrance swap? What's your time I can get? Add 4 flash? Don't really want to put to automatic. I know my tram mission off My 302 won't fit same. So I guess I'm looking for a full speed transmissio 4A390.

[@rawdyrider]

Oh yeah the”I blew up my F100 engine…..again”!doesn’t make you sound cool,it makes you sound silly….

[@rgbigdog]

Too bad they don't make a belt tensioner for that set up.

[@rcunknown5303]

People your to hard on it. Me send it harder lol. Every toy I’ve owned I beat the crap out of it because well it’s a toy and I bought it and built it to have fun.

[@JackTulsen77]

I think you can get f100 bodies for rc cars. Like this comment if Craig should build a mini-mater.

[@jeremywheatleyii6935]

I am building a scsb square body Dakota small block 5 speed I challenge you to a race I’ve been watching you since I was in high school and this Dakota was my first truck as well so hopefully you will see this and not think of me coming off as a d**k and just someone who’s wanting to compare to small blocks built similar just different brands

[@LorettaShowie-eg1lt]

I want your truck....

[@NeilPost71]

Whatever happened to Shawn?