My F100's New Lightweight Flywheel Sounds INSANE! Mcleod Aluminum Flywheel and Clutch Install!

[@michaelray1590]

It's great to see someone trying to do something and learning as they go. Don't give up. Don't let the haters get to you. Follow your dreams. Not the money and fame. Stay true to yourself and you will go far in life.

[@jordanpanich]

I would highly recommend using a paint marker on all critical fasteners. Makes it super easy to check if anything has come loose.

[@andyquinlan7121]

Never thought of that... useful comment. Thumbs up.

[@sadboycali]

Red lock tight Lol

[@QuarterD25]

Witness Mark for the win

[@kevinhawley8803]

Your making memories that will last you a lifetime, well done

[@georgejarvis92]

U should b an inspiration 2 all want 2 b mechanics or Body men or women! That's the best kind of training I always thought was hands on that's how I learned by watching others & helping! Keep it up

[@Xerope_]

I had a stroke reading this comment but I agree lol

[@zunigascardetailing3300]

Because of you I started welding on my 1971 c10! Thank you for inspiring me and lots of others!

[@CountryBoyGasGarage]

Man it sounds great with open headers! 🤘

[@maxnichols1727]

You learn by mistakes, but Craig, loose bolts!?!? Aaaaaaggghh! Love the truck, McLeod clutches make a difference. I really liked your comments in the video. At 61 I learn something every day, from older and younger. Never give up. By the way, before I bought a Trans jack I made my own out of scrap metal and mated it to a floor jack.

[@javi201]

I would love to see the truck with some nascar boom tubes!

[@that-pixel_guy7636]

Ear rape will be right around the corner waiting 😂

[@tonycarter669]

I remember hanging out my buddies working on cars great times enjoy while you can

[@c7d3p]

Keep up the do it yourself mentality. I just finished the axle flip and c-notch on my 65. Never did one before but you gotta learn sometime. Your work ethic is awesome and your truck is killer.

[@BakuretsuTen]

I bought a 69 scout because of your channel. One of my dream vehicles. It’s currently in a million pieces and I’ve never worked on a car 😂 it’s required me to learn metal work/body work and some fabrication skills. Thanks for all the inspiration.

[@Thecraig909]

You got it man. I started barely knowing how to change a tire. Gotta start somewhere.

[@kylereese4822]

@@Thecraig909 Have you seen the truck with 2 large Tesla Model S motors and Model 3 battery in it ?? the large motor can produce just over 700hp...

[@kylereese4822]

@@Thecraig909 kzbin.info/www/bejne/aJeqaqZspcl5b9E&ab_channel=TransporterHQ Making 1000BHP TESLA POWERED VW Transporter T6.1

[@That-Guy.]

I remember swapping the T-5 in my fox. Bench pressing transmissions never gets old lol.

[@21lt]

Your truck sounds amazing. I will definitely be watching your channel more often. I will be starting a project sometime this coming September and I would love my car to have this kind of performance. Keep the videos coming!

[@michaelskrhak6518]

Hey bud been here since day1 you officially outmoded me and your truck sounds sick!!

[@donameci7]

Just keep on inspiring me to do more to my 68 F100. I’m aiming drive up there and cruise with you guys one day.

[@michaelchalk4262]

You really inspire me to work on my own car.. Well done and keep going, I look forward every week.

[@DerekKingMusic]

I love the Freiburger reference. "This is our Zip-Tie moment of the week!"

[@mustangguy7063]

That's a sweet truck. I'm building an 87 with a 351w and your giving me some great ideas to do for mine. Keep up the great work. I was lucky to have some car people in my family but I've learned alot on my own by doing it myself and learning lessons lol

[@andrewguy1249]

Love your stuff I watch all the way from Australia keep sending more

[@KristaBaldwin]

This is awesome! Thank you for trusting McLeod for your drivetrain needs. #McLeodEquipped

[@aubcivil98]

I went all the way back on the F100 and Galaxie(s) and now I’m eagerly awaiting new content. If you ever soft mount that fuel pump or paint your steering column anything but that green, I won’t know what I’m watching!! LOL. Keep up the good work!

[@cerqinator6116]

Another great video. Love the vids man

[@andrewmitchell5271]

When are we going to see a new exhaust on the truck?!

[@kmnremtp]

I do go on to enjoy these. All them, every single one.

[@sparky72]

If you haven’t done the ball bearing mod to the pedal assembly I would definitely recommend it. Mustang Steve sells an awesome kit. Fun afternoon welding project and it really makes the clutch feel nicer. Especially if you replace the z-bar rods with a heim joint based linkage. Makes the whole clutch assembly feel 100 lol

[@timothybrennan3169]

This truck would sound even better with a 3" x-pipe and turn downs. Quickly becoming one of my favorite project trucks next to David Freiburger's C10.

[@OtisENGINEuity]

With a light flywheel you might want to upgrade to stiffer valve springs and pushrods as you might end up with valve float with how much more it'll want to rev.

[@Dave_Boyer]

That flywheel is something I’ve been thinking of buying, I checked on Summit, and it’s actually pretty reasonable. I think I’ll be ordering one,

[@AMCguy]

I love what youve done here. Im definitely buying an aluminum flywheel

[@crossingkey4978]

Not a bad truck really turning into something cool to c another young gun like f100. Just finished interior and built nice c4 on mine 😜

[@rivett40]

I’m really impressed with the aluminum brightening

[@FordFanatic865]

Awesome video Craig! Trucks looks and sounds badass. Always enjoy watching these!!

[@bryco32]

Fantastic job Young man. Keeping it alive just like generations past.

[@zane6461]

We should have merchandise something that says, the Craig 909 never going to soft mount his fuel pump LOL

[@sethpeters3]

So what was the cause of the oil leak?

[@obs_community9517]

I love the little horn toot when he’s feeling the clutch lol me and my buddies are the same way I swear

[@jimearnest4342]

Man you're truck sounds awesome! I always enjoy your content Craig, keep it coming.

[@Lsx_Lo]

we use brightener0 at my work, its meant solely for aluminum but it eats away at dirt too but if your aluminum isn't coated in any sort of protective layer the brightener will burn the aluminum very fast and leave black marks everywhere, the only way to get rid of those is with more brightener, don't let it dire, don't inhale, don't drink, treat it like acid because that's what it is but if you were to fail any of that don't be afraid its nothing too strong... just don't drink it you'll die very very fast lol

[@dominiklf331]

Hey Craig, Fine work! All the best and support from Germany!

[@Backwoods_870]

That Ole Ford sounds sick awesome 👌 👏 👍🏻

[@slow5oh89]

Cool - I love to do an upgrade when having to make a repair

[@Germanmuscle]

Love watching these videos

[@yamahaxs6501]

wow, the sound is incredible!

[@williamhelms9942]

Shifting is a hell of a lot better, and easier with 100% less effort, huh Craig? Something I was asking myself about whydoes Craig remind me of stabbing gears yet going nowhere fast? The plastic shifter bushing replacement with a brass one seems to answer the question for me. You're enjoying a thrash in the truck a hell of a lot more without being exhausted on the way home afterwards, Craig? Answers point to yes, I think I would be be moving out of the house and into the truck too as far as the, "I spend so much time in the truck, I might as well figure a way how to sleep in it!" thing. Good Job, Craig!

[@joeydailey6980]

00:05 i found one of those bikes nest to the garbage when i was little it was dope

[@millspaugh2000]

Great video Craig! You are an inspiration how you dive in and do things and learn as you go and don’t give up ! Love your videos.

[@suqmadiq68]

That flywheel sounds awesome.

[@drew9316]

Sick vid always great when the hard work is paying off! Truck sounds amazing please get rid of the super 10s! Maybe try black widows??

[@morgansword]

Granted Craig it will have more power just for the fact that it takes less to turn less... that said, and not negatively is that mass equals more torque as laws of nature prevail. It sounds crisp and very responsive but the exhaust so close to the cabin is a bit harder to hear a radio, or loose bolts a jingling around.... just saying cause of how much you love your rigs. I think that you nailed what you were shooting for!!

[@charleswoodbury388]

Great video keep up the good work

[@RussellBrosGarage]

Damn the chop on that thing!

[@bridgercritchlow5558]

The sounds of an old carbureted v8 is unbeatable

[@Slowly98-]

Awesome video!

[@Viktorrhansen]

sounds sick with no headers!

[@edcadlick2650]

Music to my ears

[@travisstingley7806]

Did you clean that flywheel off before you installed it because they come with a factory coat to keep them from rusting I’m 21 and also a car enthusiast like you and learned everything I know the same way you did the f100 is bad ass and I can’t wait to see the galaxies done keep up the good work

[@davy7757]

You need to take your truck to the drag strip again and see what it will do now with all the work you put into it.

[@SAM-eg7jg]

I noticed nothing as far as quicker revs or (free revs) after my aluminum flywheel install but it was very noticeable on Quicker RPM Deceleration between shifts, I am still reminded by its overall performance value every time i drive it.

[@79beans347]

I love the aluminum flywheels, I have one on my 347 stroker in my 79 pinto and I had one in a fox l used to have that i converted to a 5.0 from the wimpy 4 banger, but you can most definitely tell that the aluminium flywheel is in it after you use the fat heavy cast iron one because it revs quicker and accelerates faster as well, next get a aluminum driveshaft and you will free up more power between the two that compliment each other really well, I hope that I can finish up my pinto this weekend so I can drive it for the first time but I totally dig your truck, its come a long way since you first started on it and it is badass . I love the idle it sounds sick , do you know the cam specs on it? If you read this long message 🤣 let me know what they are but ill probably just get the heart like always because nobody really reads the long ones 😂🤣

[@johnnymoody2740]

Awesome video 👍

[@FivePandas]

Hey bro, just got recommended your video. So I'm sure you've addressed this already, but underneath of your truck is mint. What undercoating did you use, and would you recommend it? I'm undercoating my impala soon and would like any advice you got.

[@christopherreynolds8873]

Great video and advice, you don’t know until you try. But stay committed.

[@coleshirk1844]

Tearing apart and fixing stuff on my truck is always something I wanted to do, only bummer for me in that it's my work truck and is used all but 1 day a week. But I am working on saving money and I'll have some time this summer/fall and I want to tear into it and make it better/cooler

[@jbtoptc7327]

Man that sounds GREAT !

[@rustynailmott8003]

Wow, that joker sounds so sweet.

[@XEFairmont]

Great philosophy and the fruit of your efforts are starting to take shape. But what was the oil leak?

[@pnwchris2000]

The first 5 minutes of this video pretty much sums up how my life goes 😂

[@marcusmaddenov2451]

Good video Craig!

[@ethandoor5748]

I always like to put a little black rtv around my seals👍

[@ivangabriel3472]

Where i work we still make metal parts for that model tho, greetings fom Arg!

[@kemosabegt350geuss6]

What was the source of your oil leak? I was thinking rear main seal.

[@JayEllis76]

I use to watch your videos and be like: Cool nother ford restomod Now: Oh s^&t I can start modding my truck now I bought a 67 Dodge W200

[@sadboycali]

Mod a dodge? LOL good luck. XD

[@miguelangelbatresgaramendi5087]

What resonators did you install? or did you put a pipe

[@jeffreyweatherwax6815]

i think it would look and just be so cool if you could get your hands on a used 671

[@frickazeen]

Never heard a carbon citizens song slowed down, senna sounds pretty cool!

[@leeatkinson8451]

You are correct. keep up the good work. You got this

[@danielkustra9071]

you should do an x-pipe. that thing would sound even better with those mufflers

[@ericshaw6100]

Yo i live in ramona also. Ill have to come out to the cruise and see this beast lol

[@curthall4096]

Sounds Great with open Headers!

[@montymatilda]

Ha! And I thought I was the only one who left the drive line bolts loose! Sometimes s@$t just happens and sometimes we catch it when it does. Great work you're doing.

[@zane6461]

Yes posting

[@robroten6446]

Did I miss the oil leak repair?

[@TheFrameoff]

Good clutches , I have one in my f250 . Build On

[@motorworksmafia]

Sorry I may have missed it in an earlier video, but what cam are you running? Keep up the good work sir

[@zane6461]

Hey are you ever going to swap to a rear tank Between the frame rails? If so I would really like to see how you do it the people on the form say to use a 70 mustang fuel tank I’m gonna try it when mine gets here thanks man in advance for responding

[@tacomas9602]

I can't believe how fucking fast that thing spins up

[@orangehigh0355]

Hi I really want a f100 now

[@carrna100]

Next mod. Put a scatter shield in and do away with the aluminum bell housing

[@955radiogirl]

Be careful if you go T5. They will shatter like glass with just a bit too much power or bang shifting

[@Thecraig909]

That’s why I’m keeping it as a spare

[@ny-reaper-trucker]

Hey budi love the truck and what your doing to it. Im trying to find a dodge truck from the same year to do what your doing. Thanks again

[@foringasobs2452]

Saludos desde Mexico 🇲🇽

[@MattSkiDooFord]

T5 has different output splines compared to the Tremec 3550. I believe T5 is 28 and 3550 is 31 spline.

[@codeiene]

Ur trucks Twin is here up mid way Cali.

[@jeffcomer8317]

That's sick man.

[@silentshredr]

Honest opinion on the light weight flywheel for a daily?

[@POTCsIronMan]

How's the flywheel on the dragstrip ?? I got 64 C20 I'm build as a street strip truck . I'm debating about either sticking with the steel or going to aluminum and clutch from mantic

[@kerrywaldrop4546]

Bet your neighbors love you

[@DanzigDemento]

Just like when I was his age but things actually work!

[@adamgrosskreutz7546]

How do you like the manual brakes, and do you have stuff for power brakes?

[@melissaweidman3326]

the biggest mistake i find on rigs is people not putting in all the bolt back in i find so many rigs missing a lot of bolts and there is a reason for every bolt in a rig they don't put extra bolts on rigs . i have a friend that is really good at building and fixing rigs just he will leave bolts out , he tells me they are extra bolts that u don't need . then i ask is that y ur rigs drive sideways but he knows it drives me nuts . i have to have every bolt in the rig from the factory . like my 68 chevy it has been sitting for 3 weeks just for bolts i finally found the factory bolts for it . another thing i do is clean the threads on all , use a tap set on everything that way if it is torqued it will torque correctly.