My First Ever Coyote Hunting Tournament - Scope Cam

[@jft1911]

My buddy has a Hell's Canyon Speed that he got as a suppressor host. Had the hassle of getting a custom adapter since Browning decided to use a non standard thread pitch. Finally got that squared away and in the end saw the same thing you did. It wasn't so much grouping, more like patterning, even at 100. We decided that the can was likely messing up the harmonics, especially since the barrel was fairly thin profile. He put the factory brake back on and gave up on suppressing it.

[@LunkersTV]

I just changed the chassis to see if that’s the fix

[@usvandy]

My son has a bad seizure condition and I work 120hrs as a Firefighter/EMT a week to provide and pay medical bills. After a long day having your videos to watch have helped me so much! Thank you Rob.

[@Gangcop7791]

120 hours a week?

[@usvandy]

@@Gangcop7791 3 24hr shifts at the Firehall and 4 12s at my side job. 6am-6am (Firehall) , 6pm-6am (Side) 5:30pm-5:30am (side) leave there go to the Firehall 6am-6am and then repeat sir

[@Leadslinger619]

I think it's called epilepsy. 🤔

[@westtexbowhunting]

Definitely do some more long range hunting like this it’s awesome content 🤟

[@scottybooms9977]

Dude, I could watch HOURS of this hunting content you put out. Just me???

[@LunkersTV]

👊

[@HaydenIverson-qd6ke]

I had the same issue with an AR… one thing that helped was direct thread mount rather than a quick connect. Other is reloading. It’s time consuming, but pays off when you are trying to keep groups tight.

[@whatevernext1]

Love watching hunting vids, definitely want to see more.

[@muddiggin7]

The good stuff is back!

[@victormadrigal2980]

Love all the hunting videos ! Grinding hard !! Thank you 🇺🇸

[@ndhunter621]

I had 2 Bergara rifles. Both of them needed the paint removed from the bedding blocks to shoot sub moa. They were also very picky on torque specs on the action screws but i dont think thats your issue. I used a direct thread suppressor and found the rifles shot better with it than without. I currently have a suppressor that is HUB mount compatible. When i asked dead air if the Keymo or Xeno mount was better for precision rifles they told me the Xeno would be better for long range precision work. I noticed no accuracy difference between my direct thread mount and my Xeno mount. You might also want to check the barrel to see if its free floated with the suppressor on.

[@MaryBrownForFreedom]

Suppressor changes barrel harmonics, change barrel length and groups would tighten up. Why I use an AR-15 for 'yotes, easy to swap parts and max out accuracy. My 5.56 AR will put the first 4 shots into 1 ragged hole at 100 yards, at 300 still around a 1" group

[@bladesofglorylawnmaintenan6354]

Damn great bean footage!! Love it @RobTerkla!!

[@jonny1derz7]

I wish I can go coyote hunting as often as you do. Love your predator hunting videos

[@LunkersTV]

So do i

[@nwesternoutdoors3830]

There were two coyotes in that first clip if they would of came over the hill could have doubled

[@cobyeaston2711]

Trexarms just put out a video explaining groupings and made a lot of sense to me but basically shoot 10 round groups at 100yds till be bigger than expected but u wanna do that 5-8 times adjusting making the circle of 10shots smaller and smaller until u r at bout inch - 2inch groupings at 10rd intervals making it dead zeroed The can issue I think is due to one of the holes on the barrel being blocked pushing that round off target

[@Burns1776]

Great content Lunkers!!! I'm notexpert, but I do own a few different suppressors, and to answer your question on the suppressor and accuracy thing.. The weight of the suppressor itself is changing the harmonics of your barrel.

[@TheCoolwhipped]

My guess is that the threads aren't perfectly concentric, causing some sort of pressure deviation inside the can. Or the added weight out front is causing the barrel to make contact with the chassis.

[@emmanuelcalderon1982]

The stock touching makes sense. A lot of factory stocks are barely free floating.

[@jweg.84]

With the can on the rifle is the barrel no longer free floating? May be just enough weight for the stock to touch the barrel.

[@LunkersTV]

I believe that might be the issue. Switched chassis and cans

[@SaltiiLord]

Idk if you noticed on the scope cam but there were a second set of ears right behind the one you shot so you maybe could have had 2 if you let them run in a bit more

[@markt5450]

Never ever skyline a shot!

[@Heinrich_STG44]

Great content Rob. Keep up with the hunting videos Bro.

[@LunkersTV]

Thanks buddy

[@Armedwithopinions]

Kick ass brotha, thanks as always for the content

[@clifbradley]

5:44 World class sniper right here. Actual sniper...lol

[@MichaelLabriola-f8s]

Rob only gets better and better! Gteat video!

[@JeRKII]

What would be more interesting to know is ( A ) how different brands of suppressor affect the bullets AND ( B ) which ones can be overcome with different loads. I just rewatched this because KZbin only showed I started watching

[@levi_fishing]

That's weird. My b-14 shoots just fine with my suppressor. I did 5 shots with a 3/4" group with my suppressor. Maybe your gun doesn't like the grain bullet your shooting. Are you shooting 50gr or 55gr? You also may try a heavier. Mines 1:9 and shoots 55s just fine even though they say it's optimal with 75gr

[@LunkersTV]

55. I just changed the chassis and suppressor

[@levi_fishing]

@LunkersTV I hope that works out for you. That was kinda crazy it messed with it that bad.

[@gabrielhaggard7333]

what a sick tourney. Keepin them yote populations down are a full time job

[@LunkersTV]

👊

[@calvinh.8882]

That round is so light that anything will knock it off.

[@9milsOn2wheels]

I know it's armchair quarterbacking, but maybe should have put a second round in the first one, you had the chance.

[@trapperhoot9364]

My thoughts too

[@ChickenBaconRanch1776]

They ain't flair. No one's eating coyote meat. ​@@MLKreame

[@trapperhoot9364]

@@MLKreame last time I checked it’s rare people eat a coyote 🤯🤯

[@9milsOn2wheels]

@@ChickenBaconRanch1776 Yeah, Andrew would be standing there with some All Seasoning, a fork and knife, with a napkin tucked in his shirt.

[@benmirka3648]

Coyotes a lot of times spin like that when they're hit perfect. I'd imagine they thought it was going down any second.

[@richsadventure9736]

I have 7 suppressors and some with open up the group especially if you are not using caliber specific suppressor, for example my 204 will not group for shit out of a 30 caliber suppressor but if i put a same brand 556 suppressor it's Sub moa at 100 yards. I also have a couple 30 caliber suppressor that i can put on my Remington 700 22-250 and it tightened up the groups by 1/8" but POI shifts like 8" to the right at 100 but still Sub moa group, it all has to do with the barrel harmonics, also i have seen where the weight of the suppressor pulls the barrel down just enough to make slight contact with the stock

[@_freedomordeath_]

Awesome content! Greetings from Serbia 🇷🇸

[@mosquitofleetfishing6599]

Betting your groups opened up for one of the following reasons: 1. Can speeds the round up enough to where the projectile is deformed (from spin) slightly irregularly Or 2. Dynamic pressure building in the can just before the projectile exits and pushes it ever so slightly Or 3. The can weight is throwing the harmonics all out of whack Could be none of the above, could be all of the above.

[@mikewhitman745]

Please explain#1. How would something designed to diffuse pressure make the projectile accelerate so fast so quickly it deforms from that pressure and not the pressure of being accelerated from 0 to 3000 plus feet a second? Or are you saying that it increases the spin rate of the bullet so much that centrifugal force causes the bullet to literally stretch itself outwards and deform?

[@aaronmenchinger]

The supressor have a crown? Or the transition in rifling off, if it's over/under torqued? If it's possible? I'm not too familiar with suppressors🫣😉 but I mean that would be the two variables I would check. Thinking a longer barrel would get better flight. Idk maybe I just sound like an idiot

[@SirPercival1207]

Love the hunting video brotha

[@mikegraham8355]

Fully agree with the second shot!

[@marcushernandez5087]

9:17 ha I don’t even claim to be a good fisherman and always went by that rule too. it must be real 😂

[@WesMcLellan]

Did yall notice the second coyote behind the first one you shot?

[@justinstation9969]

Sure did but I don't think they did

[@brandoncoy1874]

I haven't done research but the suppressor probably slowed the over all velocity of the round causing the round to spin at a slower rate so maybe if you change the gr. Of the round your shooting you may see improvements

[@brandoncoy1874]

But I'm not sure if velocity has any affect of the spin rate

[@Aussie.Mick.G]

That livened him up a bit mate. Nicely done champ.

[@R1j0hn]

@ 4:35 --------> You shot it's front leg off (that's what's he's chewing on & is flailing around @ 3:00)... 😐 Happened to me before, coyote ran off (on 3 legs) almost 1/4 mile.

[@Leadslinger4593]

What’s the scope camera you’re using?

[@LaneScogin]

Darrin is the man!!

[@SGTARTFUL]

You should get with Demorange on his new resort and do a calab of distance shooting.

[@chadmccormick1412]

What cans are you guys running? Those are all nice setups! Thanks for sharing your hunts!

[@8asw8]

First coyote, you handled him badly. I mean, if you take a shot, you verify it. If it takes up time then it takes up time. Its just hunting ethics and a coyote didnt select to be born a coyote so no matter how you feel about them, you still hunt ethically or you leave him be. Everybody can maka a bad shot, but you clean up your messes before going away. Also also: Backstop? What kind of countryside is that that you fire over the horizon like that?

[@xmldigitz1]

What suppressor are you using?

[@AmyBushnell-kx9fo]

The shot groups could be thrown off because that round is flying so fast and so light that I’ve seen small sticks even grass push it of course

[@matthovater150]

I got a buddy that does coyote tournaments. He has done pretty well

[@carterman9741]

Thin barrel contour with a suppressor will really mess the harmonics of the gun

[@Ja_s-per]

Everyone at, "STT!" misses you... Much ❤️. 🇺🇲🤘🤪🤘🇺🇲

[@tylarhaugan7908]

22-250 With light weight 55-62 blows around and loosed velocity fast grain we use 85 Barnes much better

[@LunkersTV]

Yea honestly blew my mind how much it was moving

[@ReubenOaks84]

Try a different suppressor mount if your group is bad and if that doesn't help try a different suppressor.

[@trvese01]

Enjoyed the explanation

[@stonedeadoutdoors189]

Springfield Armory 1903a3 build. I'd love to see you do one I have one myself i'm about to build

[@Mjones8383]

Im guessing the barrel length is the issue, i know it sounds crazy but a longer barrel with a can on a small round actually can cause the round to be less accurate

[@LunkersTV]

I think the can was causing issues

[@LilTv989]

Try to remove your wrap on your can I had the same issue with my 6.5 had no issues afterwards.

[@ViolationNation]

Shit that first dogs arm lmaooo

[@nightwatchers79]

Go direct thread with your can. It could be that keymo adapter

[@JamesHolmez]

Did he private the strip club vid 😂😂

[@nikkirichards4952]

Just spit on it 😂 Glad that your back... ya add a special sort of something to brighten my day that on you cn, Rob... in a short bus sort of way ❤😂🤷‍♀️

[@LunkersTV]

He needed some lube

[@18wheelsandadozen6shooters5]

Boy I hope no one was on the other side of that hill!

[@RKHarm24]

243 Winchester, 85, 87 grain

[@backwoodsshiner887]

That’s why I love my 6.5 PRC she’ll reach out and poke something

[@cliff4695]

Im severely questioning robs abilities. Its very easy to do 100-500 even 1000 adjustments. A simple 20 minutes on youtube will teach you everything. Its honestly a joke at this point

[@LunkersTV]

30 plus mph winds with a light round I have no experience with?

[@cliff4695]

@@LunkersTV ive watched a lot of your shooting videos. You're way better with a bow. Who goes out with a gun and round with no experience? Rookies. No hate, no nothing. Way back when, at that range you built with that batman character. I was highly skeptical of your calls and adjustments. After 4 years of training in my backyard,I question all "professional" shooters. No military experience, no formal training. I could out shoot you with a ruger American and a arken epl4, thats about a $800 rig, factory ammo. Long range is super easy once you figure it out. I unsubscribed a year ago, this was suggested to me, I see nothing has changed, ill just stay unsubscribed lol. My suggestion, quit talking about foreign wars and get back behind your gun. You need the practice

[@kiotewolfer3278]

Running a 3 man team and no shotgunner? Coyote at 30yards with a 12guage and 4/0 with a full choke will.be stone dead. Spent many years hunting calling contests in the west and with a 2 man team we always had at least 1 shogun with us.

[@TexasRedneck]

Did I miss what caliber you're using?

[@TexasRedneck]

13:46 22-250 I should have waited till the end of the video before posting lol

[@tman3831]

Run a lighter can will help with harmonics. Any can will affect poi

[@philsgoodideabadidea]

Thanks for the video

[@LunkersTV]

You bet

[@brianatkinson8164]

Does a suppressor really help a 22-250 that much? Sure it takes a little of the sound out but it is very much super sonic so the sound will still be there. I know they are hard to judge on video. Maybe the first shot is the can filling with gas, then the next two are close, I think you only showed two shots so it is hard to tell from the video, the can with no gas could be affecting the velocities. I would do a 5 shot group and see if 2-4 are on. That doesn't do much in a hunting situation but then you would know what the cause is. Just like how the first shot is always louder than that ones after it from a suppressed rifle. 22-250 is a great flat shooting round but wind, especially at range, will really push it around. 22-250 is about a BC of .2 whereas a .300 win mag is about .45. Makes a huge difference when stretching the legs in the wind. Do you have a reticle in the scope designed for .22-250, I would probably buy one if I was shooting at range consistently. I believe Leupold, my scope of choice, (and others) make custom reticles and turrets for you for fairly cheap.

[@Alexafm416]

A can on a fast round like that just takes the harshness away from the shot it doesn't really make it much quieter

[@MrRussTime]

I would ask gun manufacturer of that rifle what the muzzle break on there if that could be what is causing the larger group with can on there what grain of bullet are you shooting ?

[@LunkersTV]

55g

[@MrRussTime]

I believe i noticed you were hooting hornady shooting at above that 2300 to 2400 fps those bullets are designed for best performance out to 300yrds they suggest higher grain and lower velocity down to Mach 2 at 2232 fps I still belive the muzzle break is main reason for deviation with can depending on the baffle stack design@@LunkersTV

[@KyleStjohn-lu6ew]

Lets go Brandon

[@LunkersTV]

Lol

[@tac_r_usoutdoors8984]

What happened to the stripper vid? 🤷🏻‍♂️

[@terrenceseymour]

Yeah I just came to watch it too and its gone.

[@j_b_1236]

I am so glad you back doing KZbin .

[@wesleyr9868]

There was a second coyote that came in with that first one

[@koriebeck9006]

What happened to the shooting range and Toby?

[@46bigtex]

Old horns corner store. You are in my neck of the woods.

[@mgmwinz7791]

What gun is Rob using?

[@502outlaw2]

Thanks!!!!

[@b-allowed-farmeroff1586]

Rob make some fried food in the next video lol.idk lol

[@Maxbacz]

Rob, what bergara model is that. I’m looking for a ‘yote gun and I like bergaras. Just wondering.

[@LunkersTV]

Let’s see if it’s better with this new chassis I got on it

[@shootermcgavin6946]

What tan pants were you wearing when climbing the fence 5:38

[@StarWarsFreak2111]

Judging by how the first coyote you shot reacted it looks like you just shot off its front left leg.

[@djupchurch2673]

Wonder what else u spin on like that 😮

[@hunterstanley5481]

There was a second dog behind that first one y’all shot look to the right you’ll see his ears poking over the hill right before you shot

[@Matt_Hntr]

Anyone know what ear pro robs using ?

[@alexwhalen5356]

Probably a stupid question but I’m from Illinois so I’m only familiar with deer hunting. Can you eat a coyote or are they only good for their pelt?

[@LunkersTV]

You don’t eat animals that eat other animals

[@traviskauffman1255]

I made the backstrap from a coyote last it was pretty damn good it tastes like venison with a little more gamey but it looks like pork

[@Mjones8383]

​@@LunkersTVfish eat other fish

[@jefferync9885]

its most animals with teeth that eat meat . deer dnt eat meat . cows dnt eat meat chicken dnt have teeth . ect. now with fish again if they have teeth an eat meat like a shark mercury to hi u could eat tons of mercury

[@jonwarwick1017]

Bears eat meat!!!

[@kennethdawson1504]

Buddy if your ever in New York this time of year and wanna hunt some yotes we run em with dogs whole new experience and a lot of fun

[@forrestsmith1044]

It could shoot better with different ammo with the suppressor on the weight of it is throwing the harmonics off

[@AmyBushnell-kx9fo]

So your can my be contacting the round as it’s exiting the rifle and throwing the shot groups off

[@HENRYfromSkalitz]

Come Wolf hunting in Russia you can drive truck while hunting wolves.. look into it some time plus other game.. try to be the next Jim shocky that dude is a legend 🍻

[@grannysjugs]

Get rid of the Bog Deathgrip.. they’re a joke of a tripod.. I just shot a yote at 456 yards at night with thermal.. off of a TWO VETS TRIPOD and RRS TA-2U leveling head.. spend the money it’s worth every penny!!

[@sketchyshredding1681]

Love it🤙🤙

[@Jun1e-B]

You probly know this by now but you hit that first yote in the front left low shoulder high arm. probly bout took it off though. Love you lol

[@joshw2412]

Skylined

[@travis4319]

Your suppressor is too heavy. Need something titanium like that SilencerCo Scythe

[@nzxN8]

Love it

[@rutvikcontractor3736]

love from india🇮🇳

[@Redlead69]

You need to buy a pulse fire ubf like 700$

[@Tx22986]

Elite

[@michaelrooney5936]

I stopped the vid at 5:31 or something ridiculous like that and no 'yotes ,dogs whatever...come up to Montana for a varmint shoot .

[@kompaznfishin9786]

Yooooo! Lunkers what is happening with the 60% off I want to spend my money. Need that Bux gear.

[@LunkersTV]

Should just use code LUNKERS