My FLOODED Truck Finally Drives! - Part 3

[@Thoridin58]

Love that Mook is so relaxed in front of the camera now. At 11:00 when Mook says she's a lucky woman, I quickly thought that "Kev is a lucky man"

[@michaelramsey82]

He really is. Mook is an awesome dad.

[@giggiddy]

Love shows where folks mechanically straighten out classics like this, then take them on a nice long road trip. Never ceases to amaze me how this old iron can still travel tons of miles after they have been sitting for years. Thanks!

[@1leggeddog]

As a fellow woman learning how to do auto mechanic stuff, i salute you mook. I did my first brake job last year during christmas vacation :) It's really not as bad as i though and actually fun to learn

[@Torsee]

Good for you!

[@ellamaek]

This is my goal too! Watching Mook do her own work had been really encouraging!

[@trevorpomroy550]

Props lass!

[@blueovalfan23]

i keep saying it's not that bad. i have grown men in my family that will not attempt it. those old trucks are gravy to work on though. most people don't know how to figure stuff out off live data. i would encourage you to learn that stuff if you wanna do much on modern cars. it's funny, my wife, knows more about that stuff than many guys do. been married 11yrs now and not once have i sent a vehicle to the shop. i also tend to like mechanic specials, broken down not ran in years and the previous owner couldn't figure out, i'm cheap that way i guess. she's learned a lot, i can tell because she can follow my conversation talking about them. she'll even come out and help me usually. it's funny to think about.. i'm all for females knowing this stuff and honestly i can't blame ya. most guys are lost under the hood anymore, can't depend on them to get out there and get their hands dirty. can't be fixed with a game controller and they're out.. anyway rambling a bit but good for you. just look into that diagnostic stuff and it's not that complicated either.

[@1leggeddog]

@@blueovalfan23 I just wish i had a garage to do projects in

[@JamesStewart77]

Most important part of brakes - inhaling mosquitos. I discovered that truth when doing brakes on my 86 trans am. Truer words have never been spoken.

[@carlfreeland5077]

Mook... we want more videos, you are just brilliant, even if it is not connected with cars or trucks, you are a brilliant presenter and could talk about many things lifestyle, fashion, life in the US... Mook you are AMAZING!

[@grndiesel]

When I was a kid, our next door neighbor used to have a green 1979 F100. 3 on the tree manual and a 351 V8 that he rebuilt. Can't wait to see what happens to Mook's truck. It's stubborn now, but you can tell it still want's to live.

[@creepingjesus5106]

Just the heartwarming tale of sarcasm and hammers I didn't know I needed today.

[@robertkelly1434]

In my 61 years, I have never seen so much shiny new bolted onto so much rust. Kudos to you both for nursing that old girl back to health. 👍👍👍😃😃😃

[@klwthe3rd]

Thanks for the shout out on the new brake pedal cover! Perfect timing since you did an entire brake overhaul.

[@JunkyardMook]

Thank you SO MUCH for it 😊 it’s probably upside down but I love it

[@MurphDawgProductions]

I love these two, I hope they get married and stay together forever they’re absolutely adorable and brilliant!

[@vincedibona4687]

How ‘bout them apples?

[@chriswills9530]

Mook, you're a joy. Thank you for brightening my day. Keep on keeping on, man.

[@JunkyardDigs]

hi mookers, love ya

[@ralphsohn9912]

need more mook videos!! i like kevins videos also.

[@amyclarity7357]

I LOVE THIS channel ❤

[@zacwhite1368]

Total random find today waiting on my box truck to get loaded so thank you youtube algorithm!!!my favorite ford , hell vehicle channel!been hoping their was light at the end of the tunnel.found it.lol

[@brooklynbackyardrebuild8070]

Hi I'm fan and noob youtuber

[@craigcurtis9781]

She's wearing a Vice Grip Garage goin' ta town hat. I'll be dipped.

[@jesterr7133]

I noticed that too.

[@theironherder]

I believe that it's "VISE", not "VICE", not that the junior high boy in me objects to the concept of "vice".

[@craigcurtis9781]

@@theironherder I'm referring to the channel Vice Grip Garage.

[@waynecampbell9107]

You worked really hard on this project, Mook, good for you finally getting it otr!

[@ronmcwhirter3641]

Mook is cool. Remindes me of my granddaughter. Keep up the smiles . So refreshing.

[@normandong4479]

Had my doubts about fixing a previously flooded 78 Ford F150 but Mook & friends have shown it can be done. Kudos to Mook. Avoid getting the bearing grease on your face--it definitely isn't face cream. Bravo.

[@johnellis9147]

I love Mook, I never have to worry about comedic timing with her. A lot of people could learn positivity from her. Mook for President!

[@thecoz5700]

Its so nice to see a smart woman.. Fixing things herself... Thats. Great

[@castfar3536]

I like Mook, she's fun and she's adorable.

[@rsprockets7846]

We luv this gal

[@ericthimot4988]

Her Chaos Army grows. 3 cheers for our overlord

[@rsprockets7846]

She's a funny broad

[@blair79bear38]

Agree'd

[@dhart28]

I have found the perfect song for Mook: kzbin.info/www/bejne/jJOzmYKjja-cf6s

[@Charles_Mulberry_7977]

@Junkyard Mook I can't tell if this is a comedy channel or an automotive channel. Love it. It is fun too watch. Keep up the great work!

[@Stevenromans86]

Both of my Junkyard Mook shirts arrived, I love them. The hoodie is my go to throw over, I wear it about every night!! Stay great Mook🌟

[@martinstarline4922]

When replacing front brakes on a Ford, After removing the spindle nut and outer bearing, but the spindle nut back on the spindle. Pull on the rotor, the spindle nut will remove the inner bearing and grease seal. Also you will be able to reuse the grease seal. It saves time and money on a brake job.

[@Rich-gd4fc]

Covid: Everywhere Weather: Getting Colder World: Ending Mook: **Uploads** Day: Better

[@brendonbentley6617]

@Fat Italian ...and it never went wobbly on you! :-)

[@brendonbentley6617]

@Fat Italian Very nice. Thanks for the details. This is for sure a great solution to the problem :-)

[@rudedog2378]

You forgot , that's the best green color a factory truck (PU) been painted. There yago Richard Rawlings, where's my tater chips 🤷‍♂️

[@jeschreindl]

Fat Italian wow that must really get rid of the runout 😂

[@brendonbentley6617]

@@jeschreindl Fat Italian's approach is not directed at correcting runout, but instead to correct the glazing.

[@gmoney9588]

“ your killing me smalls ! “ keep knocking us dead Mook 😂

[@coltonthompson1844]

I’m so glad we get to see this build up of this truck it’s awesome! Good job Mook!

[@RebeldryversGarage]

The most epic thing about this truck, is it still has that totally awesome 1980's Alpine Cassette Deck!!!

[@quixototalis]

"In the news today, surprise write-in candidate Mook wins the presidency by a landslide! Also somehow voted Duchess of Mars."

[@Shane-Singleton]

Finally somebody I can vote for!

[@randomkidz525]

Better than biden

[@CodedDude]

I wasn't going to cast a vote for president, but now i have a name i can write in. MOOK2020

[@alt7488]

@@CodedDude just think if 51 percent of the voting population did it, you might have to call the thing off and redo it

[@chrisdickenson8116]

You got my vote.

[@jasonmonn8646]

If you are having a down day just watch junk yard mook it will make you smile 😁

[@Hiim0094]

" I specifically said no bugs!" Hahaha I love your sense of humor thanks for being you!! Awesome progress on the ol ford.

[@rdbrnr86gt]

Great job Mook. That's a lot of crusty rusty work that's never fun for anyone, but you got it done. Love seeing you getting this old truck going again. Keep after it and before you know this thing will be your daily driver.

[@coffeeseven]

Such a sweet truck. It's so Mook.

[@jamesdean3599]

Always nice to see people saving classics, save as many as you can people cause once they’re all gone they’re gone for good, and all we’ll be left with is the plastic disposable trash they call “trucks” nowadays. (Oh and the adult sized power wheels aka cyber truck)

[@MrEgnorant]

“I’m Mook Rustwalker. I’m here to rescue you.” (brandishes sledge hammer) "WHOOSH WHOOSH".

[@MrEgnorant]

Maybe Mook Rustwhacker! (KABLANG KABLANG!!)

[@coffeeseven]

Aren't you a little short for a Ford Pooper?

[@ddd228]

@@coffeeseven VWOOM-VROOM!

[@BrownMatters]

Heyyy,Mook.Love u,Kevin Luke and the whole junkyard universe.U and kevin made me laugh and I love ur knowledge and love for older vehicles.I'm 67 yrs old and learned a lot from you guys.Thank you for entertaining,knowledge and reminiscing about working on trucks and cars back in the day.Oh,let Kev know I'm a USAF vet.Thank him for serving

[@thatguy1905]

This is the best father son KZbin channel..

[@glennstatham960]

When hooking up brake lines, start the hard line into the flex line before putting that clip on

[@drummerdude476]

"That's George's cousin." "What's his name?" "Heck if I know, I've never met him." Lol gottem

[@jaymarleno8958]

Is that his girlfriend or sister can’t tell if it’s a joke or not

[@kaseyhyde6503]

@@jaymarleno8958 both, there from Iowa, it's acceptable there ! Lol It's his girlfriend.

[@mowler8042]

Jay Marleno I always wondered

[@cpearson7372]

Hahahahahhaahaha "If ya didn't, get outta here." Hi George! Still loving your truck, and your adoration for it 😀 Glad to see you're healthy and happy. Hopefully, everyone over there is well.

[@grantkoeller8911]

Jessy saves the day!! He is the unsung hero of all these channels, filming , and rescuing every one.

[@JunkyardMook]

He sure is! 😁🤘🏼

[@ianderbyshire384]

Thanks very much for the vids, I binge watched 1/2/3, great so see young people with practical skills, patience and tenacity. A friend and I flew to Seattle from the UK back in 1983, bought a F250 with a camper body off an ex See Bee chap called Earl. We drove all the way down the West Coast, into Mexico, back up into the US, did all the Southern States across to Florida, up the East coast, sold the truck in Fort Bragg and took train to New York and flew home. Took nearly 12 months, fantastic experience. Truck never put a foot wrong, apart from the mpg! We didn't have an electronic second tank fuel tap, it was manual under the drivers seat and always seemed to run out at the most inconvenient time, like on a freeway in LA in rush hour. All the best Ian

[@iamavet]

Has to be the most enjoyable and educational auto video I have seen in a long time.... rating 10 out of 10.... you need your own TV show....

[@coycarlson4979]

After watching episode 1 - when you drained the oil pan and it PISSED A GALLON WATER - It is my opinion - you two are very fortunate that you did not have to replace the entire engine. GOOD WORK - and - at the cost of purchasing a new truck - the GREEN MACHINE 78 F-150 is finally running and will be dependable and save you money. 👍👍👍✌️✌️✌️✌️✌️

[@geebopbaluba1591]

Hey Mook. Love watching your videos and a young woman working on vehicles is awesome!

[@jesterr7133]

I love that you guys are trying to get this one going again. Most people won't even try to save one that has been flooded. I had a '91 Skylark Custom that had been flooded. Bought it for $500, spent a year working on it, and drove it for ten years. I put a lot of money into it over the years, but I loved that car. A freaking Crank Sensor did it in. They only used that engine for one year in the Skylark Custom, and no one made it anymore, including AC. I even contacted them directly. I spent six months searching junk yards in three states for one, and never could find one. It killed me to say goodbye. I literally cried when they towed it off. I knew that car like the back of my hand.

[@jkrende]

DAMNIT... now we need a "Mook for President" t-shirt...

[@bigdaddyrief]

I really enjoy watching your episodes about this truck. This particular episode brought back some very good memories of when my dad and I would work on his 78 f 150 many a years ago. Thank you for that, keep up the good work and can't wait to see what you have in store next.

[@Bef090]

Yall are awesome. Love the energy, love the channel. One of my new fave daily watches! Keep it up to you both!

[@iana6713]

That truck is the business! Came across this while watching something on the Junkyard Digs channel - it's been fun watching what you both do. And I have learned about car repair. Always handy!

[@jakobhale305]

Love your videos mook and Kevin you guys have actually inspired me to take up car restoration

[@jerrysumner349]

Do it [we will watch]...

[@gregr1672]

Love your videos ,the 70 s Ford Trucks were great trucks ! The big six cylinders were great engines. We used to fill up the oil & check the gas ! The engines would run ,run ,run even totally worn out ! On a note,turning rotors is a great idea . I run a sanding pad over my rotors to lightly scuff them and remove any lip if necessary .Works great for in between turning rotors .

[@J_o_B_is_back]

9:23 I give that belch 8.5/10.0. Good bass but needed longer runtime 😁

[@gerfmon1]

When you can recite the Pledge Of Allegiance in one single burp, you've hit the big time. Of course if you been drinking a lot of beer, or swallowing enough air to pull that off and you can't get it to come back up, then you fart every 5 minutes for the next 3 days. Which is funny too. LOL Kevin, is Mook a good farter too? LOL

[@danw1955]

I'm impressed! Mook actually knows how to pack bearings the 'old fashioned' way with grease in the hand, instead of one of those double disk bearing packers! Easy removal of old inside front wheel bearings for future reference: Take the outer bearing and washer off, and screw the retaining nut back on a ways, and give the rotor (or drum) a good yank and it will pop the old rear bearing and seal out of said rotor and leave them hanging on the axle stub. Don't do this if you have rear bearings and seals you actually want to save!😁😉 *PS:* The anti rattle clip *always* goes toward the rear of the caliper, so it doesn't get forced out by the forward pressure of the brake pad. That also serves as a squealer of sorts to audibly let you know when your pads are getting thin. That metal tab will contact the rotor when you step on the brakes and make a lot of racket without damaging the rotor.😁👍 14:35 *IMPORTANT!!* When turning rotors (especially on older vehicles, *ALWAYS* reinstall the bearing races to give the brake machine a place to accurately index to. Due to inconsistencies in machining on older cast iron rotors, the bearing surface is always guaranteed to be on the same axis as the wear face of the rotor. The shop that turned the rotors could have saved you from buying new ones if they did this.🙄

[@PeterShaw-lb9lt]

When I machined rotors I refused to machine them without the bearing cones you can't get them set up properly on the lathe the guy that machined them without bearing cones was a d/head he does not now what he is doing they should have known. Not to send them in for machining with out the cones any mechanic should know that if you are putting new bearings put the new cones in first if you change them after it can cause run out too

[@IR-nq4qv]

Good job Mook, you should also drain the gear oil from both differentials, if you already haven't. If this vehicle was partly submerged, I would suspect they would have both gotten water in them through the breather / vents.

[@ddd228]

Water in gas tank,too.

[@allanvaneste6039]

Both diffs? It's rear wheel drive.

[@IR-nq4qv]

@@allanvaneste6039 right you are Allan, I took one look at the front hub and thought it was the older style manual Warner lock in hub, clearly it is not, thanks for pointing it out.

[@vernonfindlay1314]

The burnt turd,🤣,my daughter would call my 1998 302 green explorer the green turd,🤣.Happy Saturday, we had 7 inches of white stuff yesterday, will not last long. Like this video series, love the 1970's ford pickups,and so does my daughter like her Dad. 👍

[@RevStoration]

Mook, I'm working of a 68 F100 I call "Ole Puddin'" I've had to do all the same things. On my Ford! You've got an awesome old ford! Keep the vids coming!

[@paulhyde1834]

MY wife has it absolutely right; you ARE adorable, Mook!!!! I we had a daughter and she was like you, I reckon we'd be very proud (and proud to have Kevin as a son-in-law!!) More episodes, Mook, please!!

[@noisefuljoy]

You kids are adorable. My wife and I just traveled to Winterset IA to visit the covered bridges, and I had Mook, Digs, and Thunderhead 289 on my mind. There are more than 7 people in Iowa, so our paths didn't cross. BTW, when you were 13, you might have been very similar to the Mackenzie Philips character in American Graffiti. I mean that in the best way. Have fun storming the castle!

[@jamesallion7648]

That '78 F-100 brings back lots of memories! I learned to drive and wrench on a '72 F-100 manual trans.

[@lettucecat5782]

I listened to the burp 7 times. Best one yet.

[@bernhardhiebert2597]

Mook you are definitely worth a good laugh in the morning, enjoy your channel

[@prizedcoffeecup]

"A lot of you guys are asking if Mook and Kevin are brother and sister" "No, I'm his dad" friggin ded

[@Nano15151]

It's nice to see a boy and his dad fixing up a truck together 🤣

[@timidater4803]

@@Nano15151 HEHE!!!!

[@heyboss318]

@@Nano15151 she's cute so be quite.

[@xali2008]

@@heyboss318 he meant Mook is the dad, the boy is the kevin.

[@uncharted6197]

That's funny

[@rickejames9347]

It's nice to see a couple that actually works together on vehicles keep up the great work. Ricky James

[@IcamanSogge]

I'm also a Ford fan gotta love them. Nice job on the brakes and fuel pump you can fix it yourself and restore it. Like the color or just patina it for now. Keep up the good work.

[@geneberry7114]

Glad you got the truck up and going, truth be told though I'm just here to bask in your good looks Mook : )

[@vernhoke7730]

Well that was a semi impressive burp there Mook, BUT my daughter back when she was a teenager let one rip while at a softball game outdoors and it scattered all the birds in the trees. There is hope, keep practicing. 😱😂😆🤣😁

[@JunkyardMook]

Trust me - that was a small one 🤣. Kevin tells people I can make the windows rattle when I actually burp

[@vernhoke7730]

@@JunkyardMook 👍

[@oldcarnocar]

@@JunkyardMook sweet

[@d.r.ledbetter2286]

@@JunkyardMook Finally a Lady who can express herself without fear of judgement Kevin is a lucky guy

[@guywerry6614]

I have a daughter-in-law who is 4 foot 11 inches. (Tiny). She can burp downstairs in our church and people UPSTAIRS are startled! She burps like a football linebacker.

[@billz4071]

I owned a 1974 Ford pickup with a 360 V-8 in it. Fun truck to drive. The best part about it was everything was fixable on it. Not like today where the Ford dealer owns you and your new truck. Love the videos Mook! Keep them coming.

[@fgialcgorge7392]

Okay, I cast my ballet for Junkyard Mook as told. Thank goodness, I almost voted for someone else. Also, that truck is awesome. Time for a 4 barrel and ignition system!👏👏👏

[@CarieSaad]

*ballot

[@eugeneburns8740]

This is such a fun show to watch. Thank you guys for making me smile. I really needed it today. God bless

[@mikeeger7581]

When you have a project vehicle sometimes it takes time to get everything fixed ,, one day at a time

[@alexfriedel]

It’s so good to see your first truck back up and running and of course driving!! ❤❤ peace

[@ryanwynn4441]

“I am not a Hillbilly” should be on your next shirt.

[@oliverpetroski4205]

@@nw8000 " Im not a hillbilly" and burps on the brakes🤣

[@nw8000]

@@oliverpetroski4205 “I am am a Hillbilly” and piss on my brakes

[@LarryDeSilva64]

Yeah I am probably gonna have to do the brakes on my 1989 Ford F150 XLT Lariat I bought off my brother 14 yrs ago and when I bought it he threw in New Rotors in their boxes with the $1200 I paid for it. I never have needed new Rotors just had them turned once. So glad to see you are working on the brakes. My truck never stalls I mean NEVER! Just shows you how bad a flood can be on any truck. This truck had a 5th wheel tongue in the bed and hauled a 21 ft Bayliner boat by the Original first Owner. After my brother got it he hauled literally tons of firewood in the bed. Last year I hauled a ton of new flooring tile with this truck and it never compressed the overload springs and it has never died. It only has a 5.0 Liter Fuel injected V8 and it is one tough truck. 159,600 miles and still running strong.

[@chrisarmstrong3200]

back up then apply brakes this final sets your rear brakes

[@waltergrimes8075]

You also need to drive in reverse to set the rear break adjusters. That will help adjust the rear breaks.

[@greglaing9848]

Mook is the cutiest damn thing, and she is into cars? Your a lucky guy brother!!!

[@syrusberman4318]

Keep up the good work mook cause I'm working on my grandpas 20 year old sears craftsman drive mower and ran into a few problems the block is chewed up from a busted tappet from when it was leaking oil because of loose sump bolts and bad seal,now I gotta get a new entire engine but first I have to get a job so good luck with that truck

[@atomicjello7243]

Mook would be an AMAZING president!! I know it!!

[@mandre6488]

Mook your clips are so fun and you guys make it so fun to watch you work on cars. You do it great in front of a camara. You make a great team. We need more video clips.

[@group447]

Another great vid Mook. Love the content and Digs is a walking encyclopedia for car knowledge (even brake jobs).

[@302fox]

Love the truck mook! Nothing better than a old Ford. Glad you saved it !

[@mykee426]

"I tried to fart so hard on your head, but it failed"...lol. "I'm his dad...Son get over here!" You two are damn hilarious

[@chessvodkaopera]

Tip: 6:14 On removing the rear bearing and seal Easy. 1. remove front bearing then tread back just the nut 2. Yank the rotor at an angle and your spindle will keep the rear bearing and seal.

[@Nobody-xi2fv]

So beautiful cars you have there, shame that USA didn't import them into the Czechia, shame that we had comunism, would love to have old USA vehicles but import kinda not cheap. Nice video btw have a great time.

[@Nobody-xi2fv]

@Miss Anthropy The worst thing is that USA has large amount of scrap yards where they slowely rot, wich makes me a bit sad. I hope that I will get my hands on atleast one, I would love atleast one more saved.

[@shackman9566]

@@Nobody-xi2fv It is a shame. We as Americans want good international trade fair and balanced. I know that is what President Trump wants and knows is possible. Wallstreet and the international trade people are driven and motivated by greed. And politicians and lobby groups don't know a spark plug from a wrench they worship the almighty buck. But you just gave me an idea. What if you could fly over here and have your pick of old classic car or truck to drive and enjoy for your stay. I know alot of folks wouldn't be able to afford that but maybe the one's who could would make it possible eventually for some to be sent to similar facilities in Europe where if you can't afford to own one you could afford to rent or lease it. Maybe you can convince some other enthusiasts to import one and start a kind of ride share partnership. Have a wonderful day.

[@FoxamPL]

communism makes everything worse

[@Nobody-xi2fv]

@@FoxamPL Well it made atheism wich is good, but just by name i'm gonna guess you are Polish/ur ancestors were so I'm gonna JUST GUESS you believe in God

[@FoxamPL]

@@Nobody-xi2fv you're right but i'm neutral about that stuff, i don't care whether atheism is good or bad i just go to church

[@micheltebraake7915]

Time for a road trip Mook. Finally solved the petrol problem.

[@pixiniarts]

Did you finally get margaritas? Loved the heckin' vid, cheered me up after a truly crappy day, thanks Mook!

[@birminghamreefer2733]

Good job for wearing safety glasses mook

[@mry82]

"Kick ass and do brakes, and you're all out of brakes..." Was that a Duke Nukem 3D reference ("It's time to kick ass and chew bubble gum, and I'm all out of gum")?

[@richardhunter607]

Rowdy Roddie Piper. kzbin.info/www/bejne/qWK3lKGHrbtneKc

[@mry82]

@@richardhunter607 Thanks!

[@icerazar713]

And now I feel old because I got both the Roddy Piper and Duke Nukem references. 😂😂😂😂😂

[@mry82]

@@icerazar713 haha... yep... and... "those alien bastards are going to pay for shooting up my ride..."

[@icerazar713]

@@mry82 glasses off, you all look normal. Glasses on, instant formaldehyde face. 😂😂😂

[@pkzanc]

Love your channel, its really fun to watch you work.

[@josefmechanic]

Mook: please don’t do that! Us: too late your president of the world

[@albertbass8600]

Good job dear ( I dont know your name, MOOK ?) I have " Resurrected" a Chevrolet Avalanche ( 35000 miles) that was under water 3 -4 days, because a flood. I clean up all, changed all oils and grease,( all axes), changed gasoline, clean injectors, pour oil with teflon on every 8 cylinders, clean throttle body, and only after that I turn it on. It works very well. Just for safe I changed throttle body not to be stuck, and a transmision plaque because contacts, not well. It was running all good. It was not corrode like yours, so, not much problem. Several months with work. Good,good for your effort.

[@allglorytogod12]

My first episode...while contemplating subbing, I noticed the VGG hat. Well I'll be dipped. Nice work with the tanya harding btw. Subbed, liked and bleep-blooped. (I would have anyways)

[@BrianRLange]

I am in LOVE!! Show that 65 Galaxie 2 door again!! One of my all-time FAVORITE cars!!

[@IanNeville]

Yay, Mook! ❤️🇬🇧

[@michaelwoolever1225]

I love the 78 F150 my favorite color of green! I’m jelious Mook! I hope you have it all put back together and havin a great time driving it.

[@dogbyte555]

When I did my brakes, I forgot to burp on my brakes, and inhale mosquitoes. Now I have to start over.

[@adammcphee1795]

Lol

[@russellyoungblood2381]

Nice job Mook. I like this Part 3 because you got it running on my Birthday last year.

[@UrbExGear]

As you requested: MOOK AS PRESIDENT 2020

[@joer8854]

So you guys have figured out some sneaky way to get her elected right?

[@Quint1836]

I'll stick with Trump. But she'll run in 24😂

[@americanpatriot3638]

Mook for president 2024!!! Im writing her name in!

[@fenrislegacy]

Mook 2020 - For The Affordable Fuel Pump Act - Free Copper Spark Plugs for Families with Low Income - No More Core Fees - Pro-V8

[@Scooter30FTW]

She's not old enough though.

[@robertaxford7527]

Just found this Chanel watched this episode and when Mook said you are killing me small's you guys are now my favorite Chanel can't wait to see some new episodes

[@MRFLESHSTORM]

need more ladies like Mook in this word

[@wpetercampbell4372]

Mook, I'm hoping that when you're done with all the mechanical issues, that you have the funds to, and do end up giving that old truck a good paint job! That old girl will be awesome with all the TLC you junkyard kids have put into her! Much luck with your project, and prayers for the funds to complete the restoration of your truck! You're both fairly awesome mechanics!