My Foxbody's FULL Paint Correction Finds Something Unexpected! *Amazing Transformation!*

-SUBSCRIBE TO SAM'S CHANNEL: @SW Speed
/ @swspeedco
-Meguiar's Products used in this video:
-Meguiar's 105:
www.meguiars.c...
-Meguiar's 205:
www.meguiars.c...
-3D Speed Glaze:
www.3dproducts...
-FOLLOW ME ON INSTAGRAM!
@thecraig909
@carrnagge
-
SEND ME STUFF! (If you want)
TheCraig909
P.O. Box 362
Ramona, Ca
92065
-
Music by Carbon Citizens

[@rong4189]

Looks great. Now you need to sand and Trim Black the window trim.

[@79beans347]

That guy knocked it out of the park, he did a awesome job and definitely knows what he is doing, he took his time and done it right, hope you hooked him up with some major coinage 😁💸💸 looks great

[@ZeroFoxENT]

Just need to sand the window trim and paint with SEM trim black. 😍 Looks fantastic.

[@southern3744]

I highly recommend the gt wing for the foxbody. It doesn’t allow leaves or dirt to get trapped under it!

[@mateovillanueva6063]

Love the foxbody content, makes me wanna work on mine!

[@MyMfDominoes]

Check out The Infamous Project's quarter window restoration video. That and repaint the rest of the plastic with some SEM trim black and it'll be a million bucks. That paint turned out real nice

[@marionelson3264]

16:35 "I am not freaking chonk, I'm just full of love"

[@neil6212]

Amazing save on the paint! Dull to mirror...that work takes an experienced craftsman, and I'm not so sure that just anyone could learn it! Here's a hint on reinstalling the wing...run a strip of rubber gasket material, probably 3/8" wide by 1/32 to 1/16 thick around the wing perimeter, where it touches the trunk lid. This will keep the collection of mud from forming. You can find the gasket material, with adhesive on one side, from a number of sources.

[@richardbates2367]

Like a piece of old trimmed off pool liner would work wouldn't it?!

[@kennethelliott2267]

Glad ur enjoying the foxbody. These cars are getting insane in price and even finding a solid one to build is hard. I need to get on mine when this heat lets up.

[@silentshredr]

Do a quarter window restoration vid next, along with trim black on the door frames

[@briandentguy3403]

Loving the foxbody restoration videos! You guys did a great job with what you had!

[@maxnichols1727]

Fantastic job. Same as other comments, paint your window trim. I love black paint, but it is definitely a PITA to deal with and keep clean.

[@gregfoster4541]

Craig that turned out awesome 👌a great look for the foxbody, loving all the videos keep'em coming and as always "Howdy from Texas "!!

[@foxbodyshu5.056]

I love detailing just as much as working on my Foxbody brother! Great video & content! 👊🏻

[@guitarscarsetc.etc.7215]

What a difference. Can’t wait to see what else you do to fix it up

[@christienjacobpalacios6692]

She is looking purty! Love the videos bro. Specifically these kind of videos, working on the rides👍🏻

[@treycarveriii2299]

Looks good brother! I’ve been looking at Fox body’s on the east coast here in South Carolina and boy they are proud of them. I’m gonna get me one soon.

[@farmtruck9885]

WOW, That turned out really nice!!! I have a black Cadillac Eldorado ETC and I feel your pain, but that looks amazing. I'm afraid to do that to mine.

[@trillrifaxegrindor4411]

if it looks like shit,what do you have to loose?

[@oldschoolhillbilly560]

You need to do a reaction video of the person you bought it from. It's absolutely not the same car you bought. This is good stuff.

[@Jon_2218]

SW Speed = Awesome mad skill. Craig, wait till you replace that hood and do your other touch up works, now starting to see your vision of this car and it looks absolutely killer good. Thanks 4 tha vid.

[@Petrol360]

Killer! You can get your f100 to shine like that! I got the rust to shine on the 65 I had. Always satisfying watching paint work getting fixed.

[@brucesvt96]

Glad this foxbody went to a good home. Happy to see this car is being resurrected

[@ctech14367]

What about the window trim will you replace that?

[@yamahaxs6501]

Looks incredible! what a transformation! paint correction is such a labor intensive job, but worth the time. painted my truck matte, though, so I never have to do this!

[@charlesshamseldin9555]

Seeing all that shit under the rear wing gave me a ton of anxiety until the clean reveal later 😆

[@trillrifaxegrindor4411]

man,im thankful every day im not a 20 something ocd fuck...

[@mileslatham6695]

Wow that looks awesome! Mirror reflection

[@troysgarage]

Very impressive! Night and day diff! 🙌🏼🔥

[@RoostertheMazda]

Looks clean as hell man keep up the good work

[@victor440_]

That turned out great 👍 hell yeah

[@timoy4988]

There should be a paint code in the Vin number. I could be mistaken as well. Looks good!!

[@muttBunch]

Get replacement moldings for around your quarter windows. The kits are fairly cheap. At least they were when I redid my 86

[@mr.booshay]

Paint looks so good

[@eugenesbackyardrepair4593]

Thats why I chaulked around my wing so stuff couldn't get under it. That dirt under spoiler sucks because heat expands wing and contracts when cold which grind dirt into paint

[@soulwagon1251]

never been a big fan of those 5.0 badges, but there are some cool looking 302 badges online.

[@iiAzT3Cii]

Was this the same 5.0 that was up forsale on hanson lane going towards the estates?

[@racer193wr]

There is one thing I notice about this car over anything else.. The rear air deflector needs the keyhole relief added to it.. I think that thing is not factory ferd parts...

[@the_dank_knight8509]

*From a glance and a high speed pass it looks brand new!*

[@Ian-pc4ku]

Enjoy the content

[@MIKEH.777]

Your foxbody would look sick with the gray stock ground effect kit on it . Man bro. That looks great so far .

[@johnaba5683]

Looks great guys you did a great job I wish I was closer wouldn't mind having that hood for my future Mustang absolutely love the wheel choice though look so damn good on there

[@trillrifaxegrindor4411]

have a hood for an imaginary car?

[@6.9diesel37]

loving the foxbody content but im a truck guy hahah, any updates on that f100?

[@Thecraig909]

Getting the new block this weekend

[@6.9diesel37]

@@Thecraig909 YEEEEW!!! excited for ya

[@i-still-cruz2430]

I can’t believe the difference. A black car is super sharp when clean….. but it’s a lot of work keeping it that way. As others have said now you need to repaint the window trim and sail panels 👍

[@matthewpedregon4575]

Nice ride man!!

[@prolinews]

SEM trim black paint for the roached window trim!

[@jasonpetrich4141]

I hope you payed that guy good that car looks dam good and he worked his ass off!!! Wow dude... very nice needs the window trim back to chrome/ or painted

[@allendaleguitars.stpetersb4528]

Did you know you Lincoln was on Dmaxrhyno's , workforit, video at the pre-runner beach show. He put in the video. Blog. It was posted 1hr ago.

[@marcusmaddenov2451]

Came out really well!

[@Daniel-yb3hn]

Car looking good you ever think about wrapping it ?

[@jimearnest4342]

Amazing what a little elbow grease will do,I never would have thought the paint would have come back as much as it did.

[@richardbates2367]

My current vehicle is onyx gloss black and quicksilver down the center of the sides with 90's Galvanized steel painting and metal coating process so it has the clear coat peeling off and the grey primer spots on one side and the passenger side looks really good actually compared to the Dr side go figure anyways and it has rust around the wheel wells and the rockers so I have not even bothered to try to clean it up and make it look better.. it's a early 94 Chevy K1500 extended cab Silverado short bed Z71.

[@richardbates2367]

Oh yeah another thing that makes my truck look like crap is the filler panel under the grille got busted and the kid blocked the center of the grille up with a scrap block of treated lumber and took all the side molding off the truck and the front bumper but left the rear.and I need to touch up the Silverado Chevrolet band badge on the tailgate the letters are faded.

[@jeremyTallen1]

Everything a mustang should be you guys are hitting on all cylinders with this beast

[@lucasgusi]

Looks really great now! 👏🏽👏🏽

[@eugenesbackyardrepair4593]

Man you might want to try foam tape on under side edges. Should keep spoiler from scratching through to metal.

[@philhunt3908]

He did a awesome job on it looks like a totally different car

[@johnnymoody2740]

Looking awesome. Can't wait to see it when you get everything done to it. Great video

[@txnetcop]

Fantastic job!

[@trillrifaxegrindor4411]

paint that trim,will make it look a BILLION times better

[@MrShanetuc]

Trims next. Strip and repaint satin?

[@JoseAguirre-ri8tg]

So you're going for the Craigslist rebuild look

[@Dad-jk2wd]

Looks great!!

[@HammerPowered]

I own 2 black trucks so I know the pain of keeping them up lol. Looks great.

[@markstangsn9518]

Sand down that front clip and couple cans of that rust oleum turbo black paint for quick easy cheap fix

[@richardporter4281]

Well done a good 2 days work well worth it

[@n_y_o_o_m]

I see that sprouts shirt. lol I work there too!

[@oscarmayer9823]

Big improvement over before buff out. A fender blanket would have saved the fender. Two reasons I never own a black vehicle again. What you just displayed here on your video and the summer heat. Black cars and trucks get hotter than I care for. But you made it look proud.

[@russelladams6432]

Like a whole different car. Like others have said, get the trim cleaned up and repainted, stock hood and headlights she'll be sweet.

[@FordFanatic865]

Another great video! Heck yeah!

[@GTABLAST-zw6ye]

Does Sw.speed not have a KZbin channel at this moment?

[@willr69420]

Subbed to Sam's channel.

[@kieranmurthy5245]

For The chip In the paint. Put paint into a needle and fill that chip. If it’s rust ur obviously screwed but it worked on my friends shitty 240

[@kmnremtp]

Looks killer

[@andrewm8734]

You should always use something straight like a part of a paint stick or a black of wood when color sanding like that you. Your gonna end up with an uneven clear coat

[@Alfonxo454ss]

I wanna see that sweet sweet oem hood already 🙏

[@mikemcdaniel2570]

Let's great but I sure would like to see you get back on the galaxys that's what I tuned in for

[@damianbrennan2258]

Hi craig when r u painting your galaxy's can u send a reply lwatch u all the time

[@Thecraig909]

Well paint the car after we get it driving again. Thanks man.

[@KHONSU_MCX]

I’m looking for a new hood I have a stock one with a small dent

[@allensnook7760]

Looked like your hardwork paid off,its much more shiny.but seriously get some paint stripper and get all that shoddy black out off the stainless!!!looks crappy with all that peeling.if you like the black look i get that,but get it done proper i dont know if powdercoating can be done to it or some black anodizing plating could be done.then go that route but if not go back to stainless look.im old school i like chrome and shiny things.but im slowy warming up to cerkotes and other colors besides nickle n chrome.otherwise looks sharp.keep her between the lines!!!!snooky pa.

[@johnsarian_cu]

What a transformation! I'm guessing now every time you look at it that window trim kinda pokes you in the eye LOL.

[@tompaciga7386]

At least they put enough paint on it LOL

[@johnwalton9959]

Wow! Very nice.

[@kaboom1077]

Well I love that hood lol

[@j.r.thompson5950]

One thing about the paint job, it looks good at any miles an hour. No one will see any imperfections in the paint at any speed. No waves in the paint or bondo spots. even chips or scratches.

[@scroatnozzle]

Throw some Meguiar's tire dressing on there to complete the look. Nice job.

[@uncleheide]

Replace & paint the hood, front bumper and the trim, fix the A/C and move on to other projects.

[@jamessalter676]

Man talking about polishing a turd lol Huge difference than before and it looks great. Well done. All your angles with the camera really makes me miss my hatches. I have a notchback now which is my first. Really makes me think I am 50/50 on notches and hatchbacks. Great video bro and your boy killed it.

[@darrenrevill8664]

What a difference

[@aubcivil98]

TurboCan that hood!!!

[@CraftwerksMC]

The window trim is the worst about that car. I would tape it all off and then sand and repaint it a nice matt black. It's still not a lot of work to make it look fantastic!

[@bobbyschram2206]

In Canada were I am you could get over 10k for that car

[@pmscalisi]

The “enthusiasts” have running up prices on GM F bodies too.

[@luckent47]

Gonna ceramic like watch jrgo?

[@hechtspeed]

WOW!

[@rawdyrider]

Good job on that kid.Touch up the damaged parts and it ll look a whole lot better.Basically if the whole car is sanded and given a coat of paint/polish itll be the way to go

[@jr.torres4491]

SAM HOOK IT UP ....

[@MrJerryKramer]

I wonder what the old owner would say if you showed him the car now. 👍

[@phillipsmith75]

Ceramic coat everything after paint keep it protected for like 5 years and repels everything

[@trillrifaxegrindor4411]

oh,you bought into that hype,did you?

[@dilanbashaw4235]

Get new black trim on window

[@davidbisnette7673]

More Galaxy

[@n_y_o_o_m]

I think the current headlights look better

[@jcuellar9941]

Holy shit I’m early!! If your fox came out this clean than mine has hope!! @8ninefox