MY FREE CAR IS BLOWING MY MIND...

Get 25% OFF @True Classic by visiting www.trueclassictees.com/DOITW...
Thanks to True Classic for sponsoring this video! #trueclassic
Follow Me on Instagram!
/ diwd_official
/ diwd
CUSTOM LICENSE PLATE FRAMES AND KEYCHAINS
perfectplasma.co/
perfectplasma.co/
perfectplasma.co/
perfectplasma.co/
perfectplasma.co/
NEW MERCH: www.bunkerbranding.com/pages/...
Did you know you can get 10 percent off all HeatwaveVisual sunglasses using the code 'DOITWITHDAN'?
heatwavevisual.com/
Keytags & Hats
goo.gl/a6XerW

[@DOITWITHDAN]

Get 25% OFF @True Classic by visiting www.trueclassictees.com/DOITWITHDAN #trueclassic

[@SmallEmpire]

Dan, ODS said you lied about the bubble gum

[@turboboy0]

please dont forget to put some new headlight housing on the free car. some cheap ebay specials will work just fine with some 6500k spectrum bulbs. night driving will be amazing.

[@jayez2007]

​@@SmallEmpire⁰

[@Smokingbunny]

We Need More Jax!

[@demonhunter-ip1ps]

As a previous tC owner the rear bumper was always an issue when I had mine I absolutely loved the car had a lot of plans for it but totaled it bc of a deer and with the cartridge oil filter the factory one is very fragile and they make metal OEM replacement ones at any auto parts store I would definitely think about getting one just in case if the next oil Change that cartridge filter cap breaks

[@sirpadwell3167]

You know it’s about to be a banger video when Jax makes an appearance ❤️

[@5vpremee]

I feel like I havent seen Jax in years!

[@davidlindsey6514]

Jax is the goodest boy. Glad to see him on the channel hanging out at the shop!

[@colinhlady2096]

Next episode. So I pulled the motor let me explain…

[@isaacmathewsmusic]

Na…next video….I was installing the air ride, and the frame damage is much worse than I thought. Next two videos disassembly…two years later “we are gonna start on the scion again next week. Lol 😂 No hate though I’m here for all of it.

[@aj7961]

Next episode so I’m now LS swapping it and it’s not a project I swear

[@Zanrith]

​@@aj7961"hey this LSswap it with Dan...."

[@patheticambush]

Just like the not a build work truck. Man I miss the obs chevy

[@tylerward9277]

Facts

[@Manfred8675309]

26 minute video of good old Do It With Dan style entertainment, but the last minute of just wholesome Jax and Dan was the best.

[@iand.1752]

As an Ohio boy, it's absolutely insane to see a regular daily car with that clean of an undercarriage

[@31rd0nit]

Same here.... but, I did buy a 94 jeep in NC that was almost that clean

[@CavsCars]

I bought a 92 3000gt vr-4 in Indiana and its been an Indiana car since 92 and it has no rust at all, Practically stole it it was so cheap even though its in fantastic condition

[@nykgg]

I feel like a simpler build like you described is kind of what a lot of us viewers want tbh. It's a nice change of pace from all of the other insane builds.

[@big_beed]

I'm a simple man. Dan posts a video, I press like, and then I watch. Makes the day infinitely better.

[@SomeConch357]

wooo more dan doing things, just in time for me to sit and watch while my 3d print finishes

[@jacobshort5378]

Whatcha printing?

[@SomeConch357]

@@jacobshort5378 a Tali'Zorah figurine from mass effect, today its the M3 pistol from mass effect, just messing around seeing what my new ender 3 can do with out any real modifications

[@jacobshort5378]

@@SomeConch357 That's awesome. I never did 3d printing but its incredible what it can do

[@Arrowskull22]

By far one of my favorite cars! Have had mine for 5 years now. I’m so excited to see yours nice and cleaned up so I can get some tips and ideas for mine. There isn’t enough people doing TC builds with the new models. Definitely curious to see what you do for the bumper fitment cuz I have the same issue where they are just popping out. Watching you clean the entire car sent me for a trip just cuz I know the interior feels big and small at the same time 😂 but climbing back out of it makes you realize how low it is to the ground!

[@Daniel-dj7fh]

The little (but necessary) details like the fan and bowl of water for Jacks, makes me happy :-) What a cutie doggo

[@Daniel-dj7fh]

:-) the after credits with Jacks

[@shadowwolf4079]

I might be British but I have to say a clean nicely maintained gun shop is definitely a good smell And looking good. Love to see the work and Jax is definitely a good boy ☺️

[@AGPullen]

Hell yeah, Daddy Dan is back with the work truck ricer!

[@Stix_57]

As a second gen tC owner myslef the best thing you can do is keep it simple. Thats the plan with mine, keep yours for as long as you can. With it being a Release Series they grow rarer by the day.

[@silassmith9323]

Thank you for posting today brother. Iv been in a bad place the last couple days and you and a few other KZbinrs are the only thing that can keep my mind off certain things. So I thank you sir

[@DOITWITHDAN]

Glad you're here. We all have bad days/weeks/months... Years... But theyre never forever, even when they seem like it. ♥️

[@silassmith9323]

You’r a real one Dan, thanks for taking the time to comment to little o’l me. You guys do a lot more for the community than you realize.

[@DOITWITHDAN]

@@silassmith9323 I try and reply when I can. Sometimes I go weeks without responding then do it all at once. Thanks for taking the time to comment. I read em all ♥️

[@domclough9316]

Im pretty sure you can take those extensions off the lift arms for lower cars

[@carcrazynik]

I'm so hyped you're doing a tC build! Can't wait to see what you do to it. I have a 2016 myself so I'm a bit bias. Also there are super amazing looking spec D headlights and taillights available for your year and the 2AR motor is actually pretty good. The trans just kinda sucks. I have the 6 speed manual but its not much better tbh.

[@scottfoster7297]

Hey Dan, quick tip for ya. If you or someone you know uses amzoil, you can take the bottle, and it screws right into the oil fill. Cut the bottom off and BAM perfect funnel.

[@vincentgregory709]

I had a 2012 tc really liked it for what it was. Everything on them is super simple to fix or change. That being said it would just toss the headlight in the bin and get some aftermarket ones. Think Spec-D has good headlights and tail lights that would look good on it. My 2012 on the back of the factory radio had rca outs so you could easily put subs in it if you wanted.

[@DOITWITHDAN]

Maybe I'll polish these and sell em. I've been looking at aftermarket headlights and tails too.

[@gbresaleking]

I just did drilled and slotted rotor upgrade on all wheels on my 2012 tc, looks good and works great

[@DarndaleBeats]

love the speaker layout in the door panel that goes crazy

[@turboboy0]

i used to be a castrol gtx nuthugger but for the last few years i have been using the WALMART SUPERTECH Full Synthetic with LUCAS PURE SYNTHETIC oil stabilizer and a FRAM ULTRA SYNTHETIC filter. work just as good as all the other "big name brands" but for less money.

[@TheDoobieKiller]

Another absolute banger! Thanks Dan, always a good day when I see you’re videos.

[@iamsecretlyatoaster]

I recommend replacing that oil filter cap with a metal one from your nearest part store. The plastic ones tend to break during removal, especially if you're not careful or dont put the removal tool on completely straight.

[@vtsigma]

its crazy you got a res rs8 for free those trims and grille are very rare, I'm jealous

[@neondeception2]

I have a focus st with a single outlet exhaust in the middle, similar to that scion. I have a full aftermarket exhaust, but I used the same tip I had because I liked it a lot. I love the look and you don't see it on too many cars. Leave the exhaust tip!

[@harry1558]

Would love to see you have a go at doing a cut/ polish, I feel a Dan video would explain it to me best so that I can have a go myself

[@stephenanderson1944]

The way you fed Jax before yourself is exactly how I am with my dog and cat ☺️

[@maxknutson9070]

Dan if possible can you please include Jax in more videos? Also is there a place we can donate funds for treats for Jax?

[@DOITWITHDAN]

Just watching the videos gets him enough treats ♥️ I'll involve him more

[@johns5263]

The one shop i used to be at had replacement ends for the jack stands so you can fit them under the car and still hook up to the frame.

[@matthewmorris7729]

Don't know if anyone has said this yet but I have experieced the same probelm with the lift arms before. We just keep the vehicle in neutral so we can push it forward/backwards to get the arms underneath it.

[@sethliberty9228]

Toyota cars are nice, my favorite brand. Would be fun to see how you'd set up a Supra, one of the 1993-95 twin turbo models. Haven't seen any of your videos since the H2 but looks like everything fun has evolved nicely 👌 doggo looks good!

[@austinrode3974]

Honestly loving the TC content

[@noahsilon4630]

It seems most people don't know about the transmission problem in these cars. The rear input shaft bearing fails and needs to be replaced, not 100% sure it won't happen again though even if you use the new bearing (different part number that replaces old one)

[@michaelnapolillo]

Hell yeah dude. Mine is currently undergoing the PandeM treatment 👌👌👌👌

[@zacharybond3129]

I made it 10 minutes into the video before i decided to sub. Humor and style is on point!!

[@that_grey_bk2587]

Looking forward to it hope it all goes well

[@Stonk420]

Order a Cerakote headlight restoration kit! My buddy used it and it worked amazing!

[@Greyturtle124]

Hey see if your lifting pads can screw down to the bottom as they look like they are set to the max height, that might be helpful for the lower cars

[@austinrode3974]

When I removed my seats to clean after I replaced them I had and airbag and seatbelt light come one. Curious if you'll have the same issue

[@SADYsad]

i wan't to see more of this car build , keep up the good work dany boy👍

[@austinrode3974]

I know I said the last one was it but I feel like you brought home Jackson yesterday. It's crazy to see how old he's gotten. That's a real good bay

[@DOITWITHDAN]

It feels the same for me. He's old and grumpy, but he has been the best companion I could have ever asked for.

[@WestGeorgiaAirCooled]

Thanks for the dinner vid Dan, great upload time!

[@brunochabot9847]

The only thing you did not replace like every home mecanic is the crush washer on the oilpan plug.. cost less than $0.20... you should do it on your motorcycle also

[@austinrode3974]

Last one I promise. If you pull the intake and clean the valve and intake I saw a significant mpg gain. Near 5mpg. It's worth it and would be cool to see if you're able to do it

[@DOITWITHDAN]

Oh snap! What do you recommend cleaning wise?

[@austinrode3974]

@@DOITWITHDAN the shops use like acorns or like a soft abrasive sand gun thing.

[@Sith4Lyfe]

For the lift, usually, both sets of arms swing towards the rear. Then you just swing the short arm under the car, rather than having to lift the car to put the arms in place.

[@jaredbrooks1196]

Since the rear fender is needing replaced maybe a wide body kit would be nice two bird once stone thing fit the damage and add a wide body kit also 😮...

[@nickmaguire333]

I can smell your car! I love that smell! Also, just as an FYI, there is a supercharger for the TC. Not that you'd want that for any reason, but it's out there

[@pootmahgoots8482]

I can't stand my cars being dirty inside. My house and bedroom are fine being slightly messy but I like that clean, new car feels enough where I always keep my car and truck interior nearly spotless. Very satisfying video, buddy.

[@arnoldelliott5695]

I'm from NY. That car is brand new underneath. That's insane.

[@stevenpocius5976]

Lol I love Dan removed drain plug proceeeds to talk about how nice it is after removing one bolt don’t get me wrong though I can’t wait to see what comes of this car

[@raymondargueta9372]

Man I always loved the release 8 and 10 series

[@blaydehackworth4899]

Just to help out, if you don’t mess with it I wouldn’t replace the o rings as that can cause leaks that were not there before you replace it

[@Rallison6996]

Yooo you got the HDMI Port exhaust surround on that bad boi

[@sciontcmodzmctrash6251]

I got a 2015 tc and paid it off then traded for a 2022 Tacoma off road and am working on building it up!

[@Howmint]

Jax is such a good boy glad to see him around every now and then. But o fucking k on the air chuck microphone holder 😂

[@Aw4k3nedGamer]

had to replace the water pump on mine at 80k miles, the bearing was going bad and making noise, then the rear input shaft bearing started going bad, manual trans

[@ozzysgang7193]

I currently own a 2012 TC and want to buy a project Toyota MR2 but maybe I’ll wait and see how this build goes

[@H4ARLEQU1N_]

I'm always looking forward to the Dan Certified Mic-holder that changes every video. At this point, what is the line for mic-holders in the Dan Certified Mic-holder Co.

[@wasgucci9901]

Make it GO FASTTTTT IT DESERVES IT

[@blazingcookie9727]

I'm pretty sure you can remove the black spacers on the lift points, and it'll drop them down enough for a car.

[@hayukeen1127]

Dig the synthwave and deep wave music Dan

[@matthewjamison3211]

Seeing jax in this video hit me especially hearing his age I've been watching so long that when the sad day finally comes it's going to kill me inside I mean I've seen jax since the first video he was in I recently just had one of my dogs die after 17 years

[@Odd_Redneck]

JAX! best doggo

[@austinrode3974]

Get spec D head lights or I'd also be interested in the headlight repair because I also need to do that

[@tylerasher1939]

I like how you said Toyota three times while describing the filter wrench.

[@hoffilosophy]

You know that the round rubber things at the end of each arm on the lift spin down to be lower right? I'm sure you know but it looked like they were all the way up

[@gbresaleking]

I want that honeycomb grill you have on yours! :)

[@chadvarnell1889]

Drive up on some boards for lift clearance... Tuner Life... LOL

[@cruzpk]

hell yeah now have a whole team widebody it in one day and repaint it with some super high class Ferrari red or maybe a wrap lol

[@marinodejesus8024]

Awwww Jax looks great!

[@xxtriplethreat3372]

So, just my opinion, make the TC a track/ autox car by ONLY doing suspension upgrades and see how the times improve, would be a good experiment to see how suspension makes a car "faster" without any engine work, PLUS it will let you get good at track driving before you Put the C8 on the track

[@letstalkaboutit4883]

Do an aftermarket header! Sounds similar to Subarus.

[@HashTagDan1]

Yo Dan, the vid was cool and all and we always love to see jax. But what are them laces youve got on them vans hi-tops cos i gotta get me a pair of them

[@RyanCasey007]

Man I love seeing Jax. Best boy for sure

[@SlightlyFrozen]

1:19 there's a word for that Dan.... It's called a RICER😂

[@DOITWITHDAN]

Yea that's it!!!

[@patrickburchfield6248]

you're running high profile point on your lift. you just got to get the low profile ones. most pro shops have like 5 or so lift pads for different ride heights and styles.

[@DOITWITHDAN]

It wasn't the pads, it was the lift arms themselves. They made contact with the side skirts, so I had to add the pad spacers and lower the car on them

[@Harlee.quinn92]

“Sorry my mic had a couple of drinks and is having trouble staying up.” Savage😂

[@SosoToJanky]

jax has been with the channel for so long now

[@Celedge84]

Dan I’d wrap it to match the GSXR, or the Busa…..oh right we aren’t suppose to talk about that.

[@BC_CARS]

Dan you gotta do an audio system on it. Why? Cuz I said so and I’m seriously debating on getting an apple careplay unit that’s like $500 and I just want confirmation bias 🙃🙃

[@Frank_Serota]

You could make a custom dead pedal cover to cover the carpet tear. metal with grip-tape would be very clean and functional

[@DOITWITHDAN]

This!!!

[@TheCandycanedp99]

ay i see you dan w the Blockhead key tag!!

[@King_of_the_End]

Could do an oil filter relocator to the top of the engine so you can do a true clean oil change

[@DOITWITHDAN]

They have those for these??.

[@mazerrackham5959]

22:00 Sigma TC 😂😂

[@grimace8560]

I want a detailed install of that air suspension! I have had a kit for a few years and have not got around to ordering the bags.

[@DOITWITHDAN]

It's gunna be as detailed as I can 😅

[@Frank_Serota]

griot's CERAMIC headlight restoration will make those headlights look clearer than stock, it did wonders for my shitbox lol

[@bendooley550]

I still say a supercharger kit would be the boss on this thing. Theyre great cars to play with.

[@DOITWITHDAN]

I've heard the transmission is the major weak spot (automatic)

[@jackoghost]

its a such an odd ball car and i want one, not to big but can carry loads of stuff, do think my tall ass will fit too

[@Mi-of9pr]

Nice car i have an 04 escape thats rear shock rusted off

[@Heavy.hemi510]

I feel bad for the people that will never know what good clean wholesome gun store smells like

[@damien5267]

“I want a car that’s not torn apart for months or years, this time” EMPHASIS ON THIS TIME 😂

[@austinrode3974]

I would also be interested in seeing a carpet kit replacement mostly because my carpet needs to be replaced

[@B.Shaun.B]

Okay Danny Boi, listen to me. 👏MAN👏UAL👏SWAP👏

[@rjauto7215]

wow dan .ive been away for 2 years and your still on here and back on motor bikes wicked .i think befor i went away you had ? C8 06 C6 i think

[@rvdical]

hey just an FYI if nobody else has said it; they make Metal filter housings for them there toyoder engines. saves you the hassle of breaking off that plastic bitch if it ever breaks or won't come loose (: sold at most parts stores

[@jordandemarchi1926]

I own thr RS10.0 I love the 8.0 tC!

[@mustangsflo]

Nitrous ? You seen how much that corrola Gavin had liked it lol basically same engine 🤣

[@Pace277]

the engine and some parts of the car resemble my camry lol

[@americanthundergod9749]

That canister cup gets torqued down to 18 ft. lbs.