MY HONDA-SWAPPED 1965 MUSTANG LIVES AGAIN!

[@rrshadow2]

No car guy makes me laugh more than you do! I look forward to every new video because they are so damn funny

[@TOUROLOG1ST]

Westen?

[@brockcaron2566]

Puddings fab shop he purity funny

[@kymaniredfern4837]

I agree 😂 new sub here

[@6598ACE]

I noticed the intake doesn't have a coolant bypass like it would with oem intake, without that bypass it'll almost always have an air pocket that won't bleed so it'll continue to overheat.

[@euro2slo]

MOM TOM'S REFURB JUST UPLOADED!!!

[@jaysereinsel5089]

Beat me too it

[@packersmama2684]

I’m so high I read “mom’s refurb”

[@weareanonymous8503]

@@packersmama2684 💀

[@junkyardracing289]

Son i know

[@Rizzbulla]

Cringe

[@PrydeWater901]

At some point somebody told this kid no, and he refused to take that as an answer. Relentless is his energy. I dig it.

[@ryangreenberg2002]

If the tach is cutting out usually means ur losing crank signal

[@justinstraub698]

Try a new crank sensor

[@dillyd9020]

If the engine is being ran off of an obd1 distributor then won't it not have a crank sensor?

[@techbang3255]

@@dillyd9020 you maybe right but he said it’s converted to obd2 from factory so I think it would probably have one, and it being a ‘96

[@loweredyote8416]

@@justinstraub698 ah shit I would 110% thought losing crank signal was due to a bad tpms sensor. Never thought the crank signal was from the crank position sensor. Wild

[@michaelfoster3871]

@@loweredyote8416 tps lol

[@michaelmoncur7678]

You DESERVE more subscribers. Like, I’m inspired and want to do what you do. The entertainment, the mechanic, fab guy shit. Love it every upload I’ll watch.

[@geoffrey6000]

@UCu5DqxJdEy8RAh-XWvHvfmA yeah, but who wants a bunch of old men watching you work on restoring some old cars that you then can't beat on like you can with his... lol

[@thegoatbyme3824]

I been subscribed to him for awhile and my bell is on to. He's like a little whistlindiesel but fixs stuff then destroy it again. I love him he does deserve more subscribers

[@nathanielmagana4251]

@@thegoatbyme3824don’t compare this dude to whistling😭 toms 100% way more entertaining

[@jeremysales1232]

@@nathanielmagana4251 you don't really watch Cody's videos we see. Tom is on a different level from Cody. Both very entertaining if you have the iq to comprehend what your seeing. One day we are going to see both Tom and Cody on a episode of someone's KZbin show.

[@Flattappingarage]

This just made my day? Night? Idk it’s midnight as I’m writing this. My grandmother just passed away and I’ve been dealing with a lot overall (such as the fact the “new” engine and transmission that I bought for my car are seized) so either way this brightened my life a little. Thank you Tom, and godbless hoss.

[@vazzoxTito]

why didn’t u try turning the engine before buying it

[@Flattappingarage]

@@vazzoxTito because I was stupid and took the word of the guy I bought it from cuz he’s a family friend of mine. He said it cranked and was a possible distributor issue. Now I’m realizing it was a bunch of BS and I wasted 100 bucks on a junked 305 and T5

[@vazzoxTito]

@@Flattappingarage it was a 305 anyway

[@Flattappingarage]

@@vazzoxTito true, but considering I had a rough time making the money I did with my struggling business and my part time job it was my only option with my budget it is kind of a bummer if that makes any sense

[@garrettmeyer1990]

Made my friday night man! Thank you for the laughs. Your projects are sick

[@austinbignoli9250]

If you're losing the tach, that means losing crank signal. On 90s hondas the distributor has 3 sensors in it, one is for crank. If ECU doesn't see crank signal it can't run. The later OBD2 cars had a crank signal down by the crank pulley, not sure if that's needed for it to run, or what your setup is, but it definitely sounds like you're losing rpm signal for some reason or another

[@DylanisDyIan]

Tom has a way with transmissions, they all just seem to randomly blow up with *NO* exterior forces at play

[@EduardoGutierrez-wl4oj]

dont stop what you doin man you make people laugh and in a good way

[@hunterfreter5166]

Anytime I see a new video from Tom it just warms my heart

[@gabita6646]

i took a break from cars and working in my garage cause of the cold winter.. your channel made me miss all that and now i am going to try to fix my junk, thanks, dude

[@caseykaczmarek2240]

I have a 65 fastback that i took back to the way she was born. I am not a purest its what i prefer. I see you mention people being upset about your car. I think its fantastic. I am what i think would be in the majority when i say i am just happy to see the next generation keeping these cars on the road working on them and enjoying them. Real car people may not necessarily share your taste but will still think its pretty cool.

[@silumansulingiblis]

The most fuel efficient mustang alive

[@cppctek]

distributor issue likely. there are a few variatons on distributors on the hondas and some have a crank sensor and some dont if i remember correctly. I had the same issues and it took a very specific distributor to fix my issue. and i tried like 5 or 6 diff ebay ones, some would work for a min and then crap out. go oem or rebuild the one that came with the head and ecu.

[@EllisBatishchev]

Bump

[@racerx9931]

16:20 "It's still burping bubbles out." You got 3 sensors/switches for the coolant. ECU, Gauge and Fan switch. The gauge sensor is single wire under the dist. / vtec sol. and can be finicky. Wire your fan to a manual switch is easy and gives some extra control.

[@justindastar]

check the banjo retainer is by the fuel screen on the fuel rail also maybe open the gap on plugs incase spark is being put out under boost.

[@zara_immorta69]

Love this channel so much. Cant wait to get my own running. Wrenches up!

[@RussellBrosGarage]

I normally skip thru videos, not Tom's! 100% play thru on this channel!

[@racerx9931]

To quote my old friend, "I love your show man" I remember about 20 years ago when I took this older guy in our shop for a ride my then "build" Honda A gutted out, jdm b16 swapped 90 EF hatchback that did +9,200rpm and chirped tires during 3-4th shift at +70mph. He didn't expect that, but never doubted the Honda game after that first ride along. True hot-rodders appreciate the work.

[@yooooo6296]

Zaza and a Tom's refurb video? This night couldn't get better

[@psyodome]

Just saw the car show vid 7 months ago, so came here to comment. I love it , Yeah man awesome stuff 👌🤙😉

[@james31666]

Just found this channel. This is 18 minutes of absolute chaos, and I’m all about it

[@gta4freak12088]

My man Tom getting some sponsorship! Good shit man love the build.

[@dooby1445]

It's really weird to be one of the early viewers of a channel that's going to be very big someday. Keep up the great work man

[@AngerySumo91]

I love when KZbin recommendations actually show me videos that are interesting. The first two minutes got me subscribed with notifications lol

[@kotybenedict2640]

Honestly this thing is sweet I'm really hoping for more uploads. I'm really hoping for more power, bigger turbo and more boost

[@kylecapawanna962]

Speaking from experience sir . Swap your ignition control module (igniter) inside the distributor . Hope this helps . So glad to see masu back 🤘🏻🤘🏻🤘🏻❤️

[@kylecapawanna962]

Sorry to spam with comments . Just trying to help an awesome ignorant brother out🤘🏻🖕🏻 😉. Your swap does not have a crank sensor . It reads off camshaft position inside the dizzy .The ignition cut fouls them out quickly so I suggest grabbing a few from a local junkyard . Swap that igniter with another Honda OEM one and watch that problem go away 🤘🏻🤘🏻🖕🏻🖕🏻💪🏻💪🏻

[@Mike-wh4oe]

As a 56 year old man who grew up around 65-69 Ponys (my Pops restored them) I have to say this is a pretty cool build you did I would definitely have a blast in that and yes I subscribed.

[@lilcolonoscopy4616]

I just found your channel earlier today it’s a blessing you just posted

[@Jaydog.]

I was so happy to see you uploaded

[@dominicwood-se3dl]

5:21 " it has a nice holl in it and it also sounds like an instrument when you move it around" Toms Refurb 1/13/23

[@jotuned_]

if you have a check engine light it will have an immediate boost cut, theres a setting you can disable that

[@DariusMcScotty]

The project that introduced me to this channel💪🏻

[@wubmaster9294]

these videos crack me the hell up love the content I've gotten back into cars bc of your vids dude

[@jamesboaz4787]

@ 2:00 your powers of deductive reasoning are mind boggling lmao

[@streetcarchannel9763]

Saw this at ford nationals, very nice work. I'm usually a traditional v8 guy but this car is the exception 😂

[@happybirthdayyyy]

Love this content!! Can’t wait for this dude to be at 1mili

[@Mr-jm5tz]

Just found this channel. So underrated. Can't wait to see you blow up even more

[@justinstraub698]

Cranks for a very long time and then it also loses RPM signal, I would try a crank position sensor!

[@sideshow45]

That's part of the distributor on Hondas and he swapped it out.

[@x.breadbox.x]

It wouldn't be affected by boost. This is prob a map sensor / boost pressure cut happening in the ecu. Tuner needs to data log and see what's going on.

[@jbroadnax65]

Never laughed so much watching a mechanic working. Very entertaining. 🍺👍🏿

[@mjwittr21]

You should look into “digi dizzy” it’s a plug and play coil on plug conversion that replaces the distributor. No tune needed.

[@dawsongiardino2802]

So glad I found this channel, these videos are great! You deserve a lot more subscribers for sure

[@bencalp5931]

If your c.e.l. is on that can cause it to shut down when it hits boost. Scan it and fix the problem. Also change the spark plugs and compression test or a leak down test the engine.

[@Mike-xn1bh]

That mustang is sick! Forget the haters. I’d paint it and make it nice though

[@Ultra-Collector]

My 97 Eg 4 door has a B18 Ls, The BB6 has the H22a and the 4 door Supra GS300 of course is a ST 2jz,with that said! I really ,really wanted to see that LS motor in this beautiful magnificent creature! You’re absolutely brilliant to do this and I promise this needs my custom rear Honda badge,they mount upside down,and i also have a Acura badge i did,mounted upside down they make an H! They’re perfect for this beast!

[@kalh.9241]

TOMMMMMM , just found your channel watched a lot of your videos, gotta be favorite channel on KZbin . Keep up the good work my friend -Kal

[@chrisblu8]

I've seen a couple vidas before but this one is masterpiece that's earned a sub. Excited to see more

[@that93fleetwood]

i love it when you upload, you inspire me to always blow shit up on my 93 fleetwood brougham 😃

[@hotrodluke]

fellow eugenian

[@calebamidon8895]

I would check your coil packs. Had a friend with a wrx that was having a similar issues. He replaced the coil packs and now had his full boost and zero hesitation or trouble starting. Love the content!!!

[@fiberoptichairline]

Do not think this car has any coil packs.

[@x.breadbox.x]

It has a dizzy silly ! . No could packs

[@drewparry3791]

Check fuel cut, get a new fpr adjustable and run the gauge into the cab so you can view when boost cuts out.

[@wr1ght939]

I just found your channel through this vid and I gotta say I love your personality!

[@PXRTYPXN444]

Watching your videos makes me wanna learn how to build my own cars when get in the af

[@friendly-days6138]

I love Tom's refurb and if you don't too you're clearly missing out on key points of life.

[@x.breadbox.x]

You need to take it to a tuner and data log the inputs. Your either getting a bad signal from the map sensor or something in the tune has changed. Seems as though the ecu is commanding fuel cut based on boost settings or input from map out to lunch causing it to see an over boost vs the tunes parameter. You also need to time the car since you swapped the dizzy. it's crucial you install boost gauge , wide band and pyrometer. Really beneficial to keep an eye on these and learn your engines normal temps , AFR and if you develop boost leaks , over boost etc. Good luck. Used to boost and tune Honda's 20yrs ago almost now. Uberdata ,Crome software with moates ostrich and burn the final chip when down tuning. P28 ECUs usually. Or a gsr ecu with knock sensor capability

[@Lxnney]

As soon as I saw your Mustang, I instantly thought of Ken Block. RIP the legend, 43ver.

[@gavin_z28]

This channel gonna reach 1 mil sub this year, this is the content I want to see

[@koltrountree5219]

Absolutely loving the sacrilegious hondstang! Can't wait to see more of it

[@thatKXk1d]

11:20 twist the distributor cap around to “tune” the spark

[@jonnoonan9927]

YES HE HAS A BRICK , THIS GUY KEEPS GETTING FUCKIN BETTER AND BETTER, I FUCKING LOVE YOU BRO

[@kymaniredfern4837]

New sub here i seen the 67 Stang 🐎 video on a short 😅 loved it. Then went back to the first vid. He doesn't just love to build, but drives them as well as fucs them up and drives them again 😂😂😂😂 so im here to stay 😅

[@tjlance7031]

Bro your legit af. I really like your builds.

[@kimby001]

Damn, Mustang still purrs like a kitten partner!.. Love the humor in every of your videos. Keep it up!

[@shelbycarrolz5608]

Came for the Stangs. Staying for the laughs. Keep it up. Love your content!

[@bjsteg79]

Had the same issue with a b-series build at one time. Ended up being the distributor grounding out on the block. It would run, go dead, lose tach, not start, start, really odd behavior with no pattern or predictability to it. Replaced the TPS, knock, 02 sensors, pump gas, race gas (before e85 was a thing) and everything else I could think of before discovering the bad ground caused by an MSD unit. Happened again on another build but that time the cap was bad and allowing the distributor to ground out on the block. Also I ran an aftermarket sheet metal manifold that caused overheating as well. It was blocking the flow of coolant through the head. Had to tap in a bypass hose so I could get everything flowing again. Mind you, all this stuff happened in early 2000s... a lot has changed since then.

[@luke1slost]

Tom I love ur vids currently I’m learning a lot (of how not to build a car) so thank you.

[@SkellerART]

Is that a transmission or a really heavy rain stick.

[@matthewkingsmore8824]

This channel is seriously underrated!

[@connoisseuroftigolbitts]

This car made me subscribe and love this channel.

[@brennenkillday355]

Crank position sensor maybe? Or fuel pump possibly?

[@justinstraub698]

I like the crank position sensor idea. A bad crank sensor would make sense for why it cranks forever and loses RPM

[@proheberthd214]

Keep uploading ur gonna make it my friend

[@CorvetteJ]

You are to funny man glad to have found this channel

[@hornpub543]

Like the consistency pretty good for a mechanic channel

[@zojones6432]

It needs a retune with new manifold. Thats changes a lot when the manifold goes from stock to aftermarket. Also recheck tps sensor

[@shawnkarvonen]

Love it man yeah I figured when you put the intake and different injectors on and what not it was gonna have to be tuned. Can't wait to see you get it going

[@antijerm]

thank you tom i just bombed at my ag tech competition so this will kinda make my day better 😂

[@jacksmiththeboss]

You should talk to the guys at PFI Speed about any Honda questions you might have.

[@jtj1331]

Earlier today there was an abandoned 1970 mustang coupe and first thing I thought was of your car 🤙🤙🤙🤙🤙

[@thisguysgarage]

i cant wait for another Toms refurb vid every video I'll watch Keep It up Tom :)

[@JoshLenny11]

Dou you edit your own videos? Cuz its done perfectly and it's super entertaining.

[@TOMSREFURB]

I do!

[@PeterFeltersnatch852]

​@@TOMSREFURBk swap it... with turbo.. k20a2... you'll thank me later! Id love to buy if you'd sell it! I love that thing

[@jaimereyes7480]

Yo I just randomly came across this video. That's a sick ass build

[@monetpierce7692]

I don’t know anything about cars but I love your videos 😂

[@ishaqhalimi3678]

I deadass wish I had friends like you around, If you could help me with learning shit like this I’d help you all day, all homo

[@nikolovell]

Dude I felt the pain on your face at 17:17. We've all been there and it sucks balls

[@disneyeveryday4125]

You my friend have earned yourself a new subscriber I like your content

[@blakegam1238]

I feel like he should have more subs like over a million because he funny chill and has a honda Engine in a 65 mustang and the Contact that he puts out is really good

[@danchamberlain6069]

Car engine mods , track time , and trouble shooting who could ask for anything more , great show Tom .

[@JaredR1996]

A little late night content from Ol’ Tom himself

[@highair7921]

The sweet sweet road to 100k subs. Keep em coming, buddy.

[@IM_ACID]

This dude is next up His energy is crazy

[@Asvp_Chamoy]

surprised it's even running lol good video i wanna see more of the honda stang it's a interesting car

[@lilshmeat]

Happy to finally see the trans getting put in 😂 your friend picked it up in pa from me a couple months ago

[@comatitik02496]

This man deserve more subs

[@mediachopshop5742]

The roll cage coming through the edges of the windshield makes it look like the Motorhead train.

[@DangerBoyAaron]

This guy should have way more views such great and funny content 👌🏼

[@butterybandanabrofo4277]

check all your grounds, my body’s accord had the same issue where it would start cutting out at mid range rpms and it ended up being a ground came lose

[@tannerwright7202]

Check tune. Make sure there isn’t any boost cuts or fuel cuts

[@Dallas-q9x]

As an Aussie, your accent makes me giggle. I also love the hate this thing seems to get - glorious build, great video editing. Subbed.

[@brownco_customs]

After a few days of watching this content, I can certainly say that the content on my channel is going to get a lot more loose😍🤩yeeeeahhhhhh cheers!