MY Microsoft Flight Simulator + Nvidia Panel Settings - ULTRA REALISM

In this video I will be showing you my Microsoft flight simulator and nvidia control panel settings so that you can make your sim look as realistic as possible and still get the best performance out of it. Note that I have a high end PC but I have given some tips in this video and previous videos to maximize your performance.
PC Specifications:
7900X3D @ 5.2 ghz
RTX 4080 16GB VRAM
32GB 4800 MHz RAM
ASROCK B650 PG Lightning
MSI 2K @144Hz Monitor
Viewer Discretion:
Guidance from this video not to be used for real world flying.
#microsoftflightsimulator #pmdg777 #msfs

[@AirborneGeek]

I apologize about the audio quality on this one. Will be better next time!

[@TotRuAv0015]

Turn off the anisotropic in msfs and max it in nv control panel. It will give u some more fps w same scenery :)

[@denziiey]

yes i do that as well. zero difference and performance is better :)

[@AB_neo]

This is exactly what I've been looking for!! I have a 4070, 64GB RAM, 13th Gen i7 and have been struggling to find the balance to get the best graphic settings - I applied your recommendations (substituted Ultra for High though as the 4070 isn't quite up to the 4080 spec), and the results are the best I've had yet. I didn't know what settings to have in the NVidia control panel, so I think that has made all the difference - thanking you very much.

[@AirborneGeek]

Thanks a lot for watching and leaving a comment 🙂 I am glad this helped

[@Olli-nk1rk]

Thank you very much. This is what i was looking for. Huge improvement on my ryzen7 5800/RTX3070 and i7 13700kf/RTX4070.

[@AirborneGeek]

Glad it helped! Thanks for watching man!!

[@tidisambe9923]

Very Nice, thank you !!!

[@AirborneGeek]

Thanks for watching 🙂

[@tidisambe9923]

Hi Bro, i have the Same specs i9 13900 K , 4080 super , 2 k Monitor but My sim has Like 20 fps and dont look Like yours please help. Thank you

[@AirborneGeek]

Hard to say what could be the underlying cause honestly because there are so many variables it could be anything

[@roberte6287]

Great video. Sound quality very low. Had to have my Vol full up to hear you.... Thanks

[@AirborneGeek]

I agree, Sorry about that, for some reason my headphone mic acted up after a point on this video 😐

[@MCP2002]

Sounded fine here. :/

[@CaptRajuseriousflightsimmer]

Hello, i have same monitor like yours 2K 1440 - refresh 165Hz - when set TAA shimmering/Flickering on object, What refresh rate you use on your monitor for msfs, any advise how eliminate these shimmer ? Thanks ..

[@AirborneGeek]

Is your anisotropic filtering set to 16x? And resolution scale 100 percent and 2k as well?

[@CaptRajuseriousflightsimmer]

@@AirborneGeek , I have set everything as yours, what is your monitor refresh rate, do you use full refresh rate of your monitor?

[@MCP2002]

Set "Texture Filtering - Negative LOD Bias to "Clamp". It reduces shimmer on edges :)

[@AirborneGeek]

I am going to try it out...Thanks 🙂 This is what I love about uploading my settings! I get to know from folks what is better 😄

[@TotRuAv0015]

Yeah

[@TotRuAv0015]

​@@AirborneGeeknice video, keep it up!

[@regisbiass]

Also why not use DX12 and Frame generation + LOB clamb provides better performance and high quality

[@AirborneGeek]

Someone else told me about LOD clamp too. Good learning for me. I did not know that 🙂 Thanks!!

[@caribbaviator7058]

I have a 4080super and 5800x3d and no doubt the game is cpu bound. I am hoping that is solved with msfs2024 otherwise I will just buy AMD next X3D cpu.

[@doctordoom7047]

I have a 4090 and intel 14th gen K processor, DDR5 and I crank up every setting to full, including render scale to 200 yet I already have a 3440x1440 ultrawide. All of the above Alienware. I never get less than 70fps even in heavy airports with complex planes. Blissful. No compromises needed.

[@denziiey]

i have a 4090 as well but with a 5800X3D. I'm gonna get the 7800X3D when the 9000 series is released. I can't wait to upgrade. i already get over 100 fps and even at heavy airports i can maintain anywhere from 45 - 85. having good hardware makes this sim fun

[@alihashmi4366]

i have rtx 3070 with 8GB vram and core i5 12th gen and 32gb ram. will these settings work for me ?

[@AirborneGeek]

You will have to keep terrain level of detail to 100 but others should work as is

[@AirborneGeek]

Also resolution 1080p

[@AVO3331]

Bro I thought on 7900x3d you must have 6000 up MHz memory on DDR5

[@AirborneGeek]

It is 6500. Let me edit...I forgot to update my RAM lol This is my old RAM

[@AVO3331]

​@@AirborneGeek I just confused a little first when I see it👍

[@AirborneGeek]

Updated to 4800mhz that is what I see on my task manager haha

[@AVO3331]

DDR5 memory on 3200mhz ??😬

[@AirborneGeek]

You caught an error lol That is my old RAM 🙂 I'll update it shortly

[@tidisambe9923]

Whats your usercfg.opt Settings Bro ?

[@AirborneGeek]

These are the only changes you would need to make: {Shadows MaxSliceCount 4 Size 4096 DLightContributionCullingThresholdS0 0.100000 DLightContributionCullingThresholdS1 0.100000 DLightContributionCullingThresholdS2 0.100000 DLightContributionCullingThresholdS3 0.100000 OmniContributionCullingThreshold 0.000000 {PostProcess Enabled 0 EyeAdaptation 0 ColorGrading 0 Sharpen 0 Fringe 1 LensDistortion 0 Dirt 0 LensFlare 0 FilmGrain 0 Vignette 0 LensBlurMultiplier 1.000000 FringeMultiplier 1.000000

[@tidisambe9923]

@@AirborneGeek thank You very much Bro