My MTB Frame Needs a Disc Brake Tab and a Seat Stay Bridge!

  Рет қаралды 68,614

Cobra Framebuilding

Cobra Framebuilding

Күн бұрын

With the main tubes of the MTB frame build completed, we're moving onto all the random other stuff: disc brake tab, seat stay bridge, water bottle bosses, and cable guides (a.k.a. braze-ons). This video covers the disc brake tab and seat stay bridge.
For this bike, I'm using an ISO disc brake tab, believe it or not. In the video I explain why I chose to use the ISO standard instead of post mount or flat mount. (Partly it's just because I already have a good tool for adding ISO brake tabs; it's Anvil Bikeworks' lSO Rear Disc Brake Tab Fixture, aka “Feng Shui.")
Here's a PDF on disc brake mounting specifications for the international standard (IS): www.magura.com...
I show a bunch of the process of grinding the disc brake tab to fit up against the seat stay. First I was using a disc brake tab from Nova Cycle Supply. Then I botched that one, so I used one from Paragon Machine Works. I was using my new Metabo angle grinder, and I was really having too much fun removing the material.
Here's the Metabo angle grinder if you're interested in checking that out: www.amazon.com...
Toward the end of the video, I miter the seat stay bridge. For this, I use a DIY framebuilding tool based on a design by Sputnik Tool. I really think this setup is slick for mitering the seat stay bridge.
Here's my interview with Carl Strong (Strong Frames and Pursuit Cycles) I mentioned, from the Shutup and Build Bikes Podcast: cobraframebuil...
Here is the playlist of the whole Hardtail Mountain Bike Frame Build-I'll keep adding to it as we go: • Building a Hardtail MT...
SUBSCRIBE for more videos on bicycle framebuilding: / @cobraframebuilding
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: cobraframebuild....
FOLLOW my shop updates on Instagram (@cobraframebuilding): / cobraframebuilding .
MUSIC:
Inossi - Stories ( / inossi )
Peyruis - Reveur ( / peyruis )
Urple Actus - Sunshine ( / urpleactus )
Muciojad - Troubleshooter ( / muciojad )
Waywell - Feather ( / waywell )
mezhdunami - The Shining ( / mezhdunami )

Пікірлер: 84
Brazing 101: Adding Braze-ons to a Steel Bicycle Frame
34:54
Cobra Framebuilding
Рет қаралды 51 М.
Can a Retro Bike Handle a Modern Groupset & Disc Brakes?
6:39
Миллионер | 1 - серия
34:31
Million Show
Рет қаралды 2,1 МЛН
The Joker wanted to stand at the front, but unexpectedly was beaten up by Officer Rabbit
00:12
Help Me Celebrate! 😍🙏
00:35
Alan Chikin Chow
Рет қаралды 52 МЛН
Building A Unique Gravel Bike Part 2 - No Turning Back Now!
16:18
Ali Clarkson
Рет қаралды 203 М.
Fixing some seriously wonky brake mounts
8:29
Mapdec Cycle Works
Рет қаралды 20 М.
Adding Disc Brake Tabs to an old Steel MTB Frame - Fiets of Strength - Ep. 1
10:37
Oops! Fixing a Mistake I Made on My MTB Frame
17:54
Cobra Framebuilding
Рет қаралды 10 М.
Nostalgia | Bike Restoration Build | 1994 Kona Explosif
16:16
oldshovel
Рет қаралды 1,1 МЛН
I welded a disk brake onto my retro mtb frame.
9:26
Spindatt
Рет қаралды 36 М.
These mechanical disc brakes are ridiculous! - JuinTech GTF-6
19:35
Disc Brake Converter 2.0: Trek 930 Goes Full Disc Brakes!
5:51
DanyoSports
Рет қаралды 48 М.
Миллионер | 1 - серия
34:31
Million Show
Рет қаралды 2,1 МЛН