My New Boat REVEALED - 2021 Stacer Outlaw 429 TS

[@adammalski]

Just found this! Thanks for comments on your other videos. This is v helpful

[@alft69]

Great video mate. Congratulations on the new rig. It looks great! I’ve recently purchased a Renegade 420 and looking at the same mods you mentioned. I can vouch for the fact that the carpet definitely stinks up my garage! I reckon the Thermolite/EVA floor and underfloor tank would be a huge improvement. I’d suggest you add a couple of drains at the rear of the floor so the deck wash can run into the bilge and out the bung. Looking forward to seeing the mods and lots more fish in future videos!

[@Micksgonefishing]

Thanks mate!! I’ll definitely keep all that in mind. I’m not going to rush into the mods so I’ve got time to think about how to do it exactly.. it’ll be a process but I’m loving it so far so there’s no need to rush it!

[@onelastcast6829]

Similar to my 420 renegade mate, I love em. Can take them up the dams to chase fresh water and then take them outside on the good days to chase bigger species 🤘🏽

[@Micksgonefishing]

Yeah mate, it’s already proving to be the most versatile boat I’ve had especially for the fact that I can use it in a big range of situations! Keen for more adventures in it and to see where it takes me 👌🏻

[@kizzjd9578]

Can you do a video on how you sound up fingermark, how to target them with what jigs etc? Cheers

[@Micksgonefishing]

I could but my Humminbird doesn’t pick them up in 30m… 😂 there will be a few tips in my next video which I’ll start work on today ✌🏻

[@kizzjd9578]

@@Micksgonefishing ah damn! What about inshore 5-15m range? And thanks man, love your videos, you seem like a very genuine and down to earth bloke 👌

[@johnsipolis]

Enjoyed watching that. I've got a Quintrex 440 renegade with the new Merc big tiller 60hp, wasn't my choice of motor but that's all i could get at the time, love it now. Just a thought, if you want to save weight, i put a 105 amp lithium battery which weighs 13kg for the Motor Guide and a lithium cranking battery at the back which weighs 1.3 kg, it's a motor bike battery, makes a massive difference to the performance of the boat, had them both for about a year, no problems.

[@Micksgonefishing]

Thanks John, if you have a look at one of the later videos you’ll see the upgrades I’ve done and that includes lithium batteries for both sounder and electric..

[@johnsipolis]

@@Micksgonefishing Will do and subscribed.

[@brenno_fish]

Nice rig mate, another mod would be the anchor well locker that Jared’s tinnie mods does. Keeps the locker but full Ally with a lid and you can walk on it!!

[@Micksgonefishing]

Thanks man, I’ll check him out! Definitely going to utilize the nose better just need to work out exactly how to do it before I get started..

[@robertharrowfield9268]

hi ! just came across your channel . lots of info and a good vlog . look forward to watching all your content . cheers .

[@Micksgonefishing]

Thanks Rob!! Glad you’re lovin the content ✌🏻 Enjoy 😎

[@bartbug1]

What a beaut set up. Nice 👌

[@Micksgonefishing]

Thank you!!

[@anthonyleavey7514]

Nice but far to small for somewhere like Yeppoon where you have to head 80km minimum out to sea before even considering fishing. 120km+ is when you start getting a few legal sized fish. Past 250km out you can get some half decent fish. Past 350km, might even get a pb out there on a really hot bite

[@Micksgonefishing]

Yeah a 490 would be nice but it wouldn’t fit in my shed… but that’s what I got the Haines for..

[@anthonyleavey7514]

@@Micksgonefishing nice, I think for this area I need to buy a Hobart Class Destroyer or a larger Frigate. Especially considering the distances required here to get a decent fish

[@AlsAllAussieAdventures]

Great video mate, not alot on the outlaws so good to see one.. I just bought a 2021 429 outlaw ts aswell, arrives in 2 weeks.. cant wait! Look forward to your build process. Subscribed mate. Cheers

[@Micksgonefishing]

Thanks mate!! I bet you’re keen for it! Bloody nice boat and very versatile for its size!

[@jdean1851]

Awesome" RIG! Great Walkthrough! Super Sic!

[@christianrm874]

Geez mate what a channel! Good music, crystal clear content and the beard 🤙. Natural sun protector in my books haha. Love the new tinny! Keep the vids coming legend..

[@Micksgonefishing]

Thanks brother 😎 really appreciate the kind words as I do spend a lot of time editing to make it what it is! ✌🏻

[@christianrm874]

@@Micksgonefishing I can tell mate! Quality stuff from start to finish. Enjoy the new tinny and I cant wait to see the new eva flooring

[@scottmiddap9678]

Hi Mick, The outlaw is a great tinny. Just wondering where abouts you got Boat rego stickers from? They suit the boat really well. Cheers

[@Micksgonefishing]

They’re a custom job from the local sticker mob 👌🏻

[@jonathandunn1943]

Previous years run-out Renegade? Comparing a Stacer Outlaw and a Quintrex renegade is not a comparison, since they are the same boat out of the same factory.

[@Micksgonefishing]

With the current availability on boats I don’t think there is such thing as a run out renegade… I chose the Stacer after having good experiences in my previous boats which were Stacers also the fact that the dealer was a lot more accommodating and had the boat I wanted in stock. This isn’t about comparing the 2 as you mention they both come from the same factory…

[@IRFANCAST]

Congrats, beautiful boat. Looking forward to the mods

[@Micksgonefishing]

Cheers mate, I’m keen too but I want to fish from it for a bit to get the feel for it and make sure I do it right! It’s a bloody nice stable platform to work with and rides amazing so it deserves to be done properly 💯

[@IRFANCAST]

@@Micksgonefishing slowly but surely 🙌🏻

[@chrischerry2787]

Looks like a great boat already. Are you going to film your mods? Would make for an interesting series of vids. 👍

[@Micksgonefishing]

Thanks mate great idea! I will definitely be doing another video of the mods once I’ve done some but I don’t want to jump in headfirst, I’ll spend some more time in the boat before working out exactly what I want to do to it 👌🏻

[@atmm89]

looks like a Quintrex, probably out of the Quintrex factory, same dog different leg

[@Micksgonefishing]

Only difference is the sticker, Telwater owns them both.

[@hackgolfer7352]

Hey Mick, wondering if your'e still happy with the boat and would you recommend one? Looking to buy our first boat in the new year. Thanks

[@Micksgonefishing]

Still loving it! Highly recommended

[@hackgolfer7352]

Sweet, thanks for that. It's at the top of my list. All the best@@Micksgonefishing

[@KC-xl1lv]

G’day Mick great vids, i have the same boat and have trouble with the electric motor zig zag steering issue too as you have previously mentioned in your bream slaying vid, probably due to motor being offset from the centre line? Not sure if it’s curable.

[@Micksgonefishing]

Yeah I don’t know what it is but man it’s frustrating, I can’t even pair my GPS puck to the motor 🤦🏼‍♂️🤷🏼‍♂️

[@brendanridgley7790]

Hey Mick another great vid. Quick question about your mate Luke. Does he do fit outs like that regularly? I've got probably the exact same job for him,.minus the NMEA set up. If you think he'd be interested.

[@Micksgonefishing]

Not sure hey, I can ask him to see if he’d be keen..

[@finstins7136]

Hey mate, nice little rig she looks like a perfect all rounder! Quick question, what breed is your sunnies strap? I like the look of how thin it is. Cheers

[@Micksgonefishing]

Thanks mate!! It’s a Costa mono strap, I got them on all my sunnies, saves them dropping and smashing!

[@thomask837]

Hey mate, you still responding to comments? Thinking of getting the exact same boat.

[@Micksgonefishing]

Yeah mate, still going strong and done over 6500km in it now 👌🏻

[@kingbull09]

Hey Mick, nice boat mate. I’ve just noticed on few different fishing channels lately that guys are covering their sounder logos for a particular brand. What is the reason for that?

[@Micksgonefishing]

Thanks mate! It’s about covering up the brands that don’t support us back. I’ve done enough free advertising for these guys and they’ve freeloaded off me and my fishing long enough! Hopefully more people take a stand 🤟🏻

[@lukenelson325]

Mate I got one aswell side console there an epic little boat

[@Micksgonefishing]

I rate it hey, the ride is amazing and I love the extra width also!

[@jennyhowarth416]

What was the tide when you were chasing the Queenies?

[@Micksgonefishing]

High tide but they move with the tides and wind etc. only way to get them is to go and try, they’re there on all tides through winter it’s just a matter of locating them on the day…

[@gmoriano]

Good vid. Is the 55lb got a 54 or 60 inch shaft? Which would be better based on your experience for this boat? Thx.

[@Micksgonefishing]

60” always mate!

[@goinnovate26]

Great looking boat. Looking forward to future updates on the mods. I was wondering what your thoughts are regarding tiller steer vs side console and why you opted for tiller?

[@Micksgonefishing]

Thanks mate! I’ll keep you all updated.. It’s a personal preference going for the tiller steer, the main reason is that it’s still quite a small boat and I’d like to keep as much of the deck open to add to the fishing space, but secondly less things to go wrong down the track and a more direct connection to the outboard while maneuvering through the skinny shallow stuff in the creeks at low tide..

[@goinnovate26]

@@Micksgonefishing Great answer. Really appreciate your insight.

[@JT-jy2sy]

What is the different between renegade and outlaw? I am tossing between these two. Appreciate your opinions. Thanks!

[@Micksgonefishing]

If you’re buying new then the main difference is the sticker, that Stacer has more red on the decal so it does go a little bit faster.

[@JT-jy2sy]

@@Micksgonefishingthanks for the quick response. Quintrex has the blade hull and Stacer is evolution hull. No idea what this means. I plan to do a lot of fishing in the bay. I am looking at outlaw 469 vs renegade 460 model. Looking online both looks the same. Both are made by same company. Price wise Stacer is 2-3k cheaper with the same options.

[@JT-jy2sy]

@@Micksgonefishing LoL thanks mate!

[@lukewettels4411]

What sort of kph are you getting at WOT ? And what do you cruise at ? Cheers

[@Micksgonefishing]

Cruise is around 40kmh and WOT is around 55kmh, all depending on load and currents etc.

[@ronaldlucas2264]

Hey mate just wondering how you rate the Eva flooring and where you buy it from

[@Micksgonefishing]

EVA is the best flooring for any boat, easy to clean, comfortable to walk on and doesn’t retain the fishy smell..

[@Felixsreptiles]

Hey Mick what sort of sunnies are those you are wearing?

[@Micksgonefishing]

Costa Rincons bro, I rate em!!

[@Felixsreptiles]

@@Micksgonefishing cheers man will have a look.

[@pauljohnson4080]

Gday mate , what size minn kota do you have ?

[@TidesofAdventure]

Cool boat mate, I reckon you should of gone the underfloor tank tho Edit, and then I get to the end and you said your going to add it in haha

[@Micksgonefishing]

Haha yeah man I’m hearing ya! I’ll get one aftermarket as I bought this boat from a local dealer who had it in stock.. didn’t wanna wait so long for the custom build!!

[@TidesofAdventure]

@@Micksgonefishing yeh ibget that, I waited about 3 months for my new one atvthe start of the year, I got the f70, your fuel economy is going to he unreal on the 429

[@jakehouston1553]

Can I say one thing looks like my 4.2 renegade same tinny same holl

[@Micksgonefishing]

Yeah mate, same factory and almost identical hull 👌🏻

[@ChuckNorris01]

How many meters is the tinny?

[@Micksgonefishing]

4.29m mate 👌🏻

[@stanlee1273]

Tôi thích một cuộc sống trên biển câu cá, và bảo vệ môi trường.

[@stanlee1273]

From Viet Nam whith love !!!!

[@nevilleyoung7647]

Pitty it’s too small for anything offshore or mackerel fishing.

[@Micksgonefishing]

I don’t know what you’re talking about, I’ve had this 50km offshore multiple times, caught plenty of mackerel in it and my missus got a 10kg Red Emperor last weekend in it. As they say a boats only as good as it’s captain!

[@pauljohnson4080]

Gday mate , what size minn kota do you have ?

[@Micksgonefishing]

55lb 60” shaft 👌🏻

[@pauljohnson4080]

@@Micksgonefishing Thanks Mick , i have Quintrex 430 top ender (2010 model) i just brought a Minn kota "i -pilot" 55lb 54" shaft , hopefully i have brought the right model (601604) i have a Yamaha 40 hp 4 stroke on the back it does 30 knots (with me in it on my own) on calm water with a stainless prop , cheers mate .