Purchased this unit recently and had it sent to Australia. Works extremely well and does everything as described. I have now removed the gear train from the lathe which also makes it run much quieter. I used a 180w servo motor with a gear ratio of 3 to 1 in place of a stepper and it is perfect for the job. Excellent product thanks for your work.
@electronicgearbox10 ай бұрын
Thank you for the feedback
@williamcullum837911 ай бұрын
This works great. I have a 10 inch logan that does not have a qui k change gearbox. I bought this from you some time ago. I just recently got it installed and im really impressed with the accuracy this provides when threading or matching cutting speed while turning. This was way cheaper than trying to find a gear box. Merci
@electronicgearbox11 ай бұрын
Thanks for the feedback.
@RafaelSilva-tu8lw6 ай бұрын
I recently bought one!!! I can't believe how well it works. I have a 1936 BoxFord Lathe model A, that had some damaged gears in the Norton gearbox This solved the whole problem. I installed it with a nema 24 closed loop stepper motor 1500 rpm with a ratio of 1:3 works super well. Thanks, Thanks, Thanks.
@electronicgearbox6 ай бұрын
Thanks
@MaximKachurovskiy Жыл бұрын
Woah, a new ELS! Welcome to the club :) Very nice display.
@electronicgearbox Жыл бұрын
thanks
@christiantrab6160 Жыл бұрын
Great video, you convinced me, I have just ordered one at your website 🙂 The automatic thread program is a great feature.
@vom426 ай бұрын
Installed mine and works as planned. Nice little controller. Now I have fully adjustable Z-axis feed and can make any thread without gear change wiht my NOVA 25L mini lathe (250/700mm) On my setup 600 pulse/rev encoder is with 1:4 reduction because this was easy way to connect to gearbox output shaft. But seems like 1:4 reduction is OK, no problem so far. Maybe I lose some accuracy on Angular mode, but that's not important mode for me. Question and UI improvement idea: I have not tested what will happen if I accidently hit + or - button during threading operation and change the picth setting? Will it lose thread sync? It might be good to add some safety function into UI, something like this: While on thread mode, +/- buttons needs long press before pitch value starts to change. This would prevent accidental pitch change if you press wrong button while threading. Same when on Angular mode, RST button needs long press before angel is reset. Normal feed mode +/- should function imminently when pressed.
@PaulMagyar24126 ай бұрын
I bought one and it was easy to install and glad to get rid of the gears in my Warco mini lathe. Used a DM556 Stepper Driver and Rtelligent Nema 23 stepper Best upgrade for a small lathe. merci beaucoup.
@electronicgearbox6 ай бұрын
Avec plaisir
@CDN_Torsten Жыл бұрын
Excellent overview of the features - thanks!
@wktodd Жыл бұрын
Excellent display and nice simple interface.
@DavidR8 Жыл бұрын
Very impressive! Looking for an ELS for my Clausing 100.
@georgepilch839610 ай бұрын
Great video, this is going on my Myford ML7
@Festivejelly11 ай бұрын
This is awesome ill be ordering one of these for sure!
@HM-Projects Жыл бұрын
c'est bon, nice and compact unit and priced very reasonably.
@CatalinMinulescu Жыл бұрын
Felicitations ! Genial, je peut pas dire autre chose. Je veut achter un dispo avec l'encodeur.
@gangleweed Жыл бұрын
The easiest way to understand metric/imperial pitches is to convert all imperial pitches to metric and then do the sums to get as close as the pitch you want to have.....a pitch that is .02 mm out over 50mm will not cause a problem if you want to have a short thread and most threads are short anyway.......the ELS system for odd pitches with different leadscrews is an approx of the pitch required but quite a small unnoticeable error overall.
@manitobaman55887 ай бұрын
Thank you for very much for this information. It's very clear with your demonstration and subtitles in English. Greetings from Canada.
@juliendijon3599 Жыл бұрын
Moi aussi j'ai la première version qui marche très bien déjà. J'espère qu'il y aura la mise a jour prochainement également pour l'ancien model.
@electronicgearbox Жыл бұрын
Non, je ne vais pas reprendre le code pour l'ancienne version, ca serait trop de travail. Je vous contacte par message perso.
@karianttonen86997 ай бұрын
Hey, thats is answer my needs, excellent!
@dawidkwiatek228110 ай бұрын
Najlepsze jakie widziałem Szacunek!!!
@markrainford1219 Жыл бұрын
Brilliant.Well done.
@andrewbishop7066 Жыл бұрын
very well done would it be possible to set the length of turning similar to thread length setting thanks for your hard work
@electronicgearbox Жыл бұрын
You can use threading mode for turning if you like, that will work
@kevinmullen43524 ай бұрын
Got mine working 👍
@bergman12186 ай бұрын
Hi I was wondering if anyone has had any issues with there ELS only working in turning mode, I can not get mine to work in test, or threading mode. If the driver is not compatible would it work in any mode? Any ideas would be appreciated
@electronicgearbox6 ай бұрын
Hi, solved, the stepper motor must be ON before entering in test or thread mode, it is the way I designed it.
@johannpcurry5 ай бұрын
What is the minimum feed rate? I see in the video it defaults to 0.004''. This is a little fast for finishing.
@electronicgearbox5 ай бұрын
For imperial, you can go down to 0.0005". For metric 0.01mm
@patriceparodi Жыл бұрын
C’est absolument génial!!!
@NickCarter-nr1gz3 ай бұрын
I have ordered a stepper motor package consisting of a Nema 24 closed-loop-stepper-motor-4-0-nm-566-56oz-in-encoder-1000ppr-4000cpr-24hs40-5004d-e1000 with a CL57T driver and a 48V power supply. Is your controller compatible with these, and will I need a separate 5V power supply? I already have an Omron E6C2-CWZ6C 360P/R which I intended to use.
@electronicgearbox3 ай бұрын
Yes, it is compatible with CL57T, pay attention to set the dip switch at 5v for the signal, it is set at 24v by default. No, you do not need another power supply, the ELS support from 9v to 48v dc input. Your 360P/R omron encoder is fine, it is the minimum possible in the parameters settings.
@NickCarter-nr1gz2 ай бұрын
@@electronicgearbox My Omron E6C2-CWZ6C encoder also has an orange wire for Z output. Is this wire not used when connecting to the controller? Thank you.
@electronicgearbox2 ай бұрын
@@NickCarter-nr1gz Yep, you do not need it.
@bergman12188 ай бұрын
Hi i just bought one last night, is there a stepper motor that you would recommend
@electronicgearbox8 ай бұрын
Hi, can you use the contact form on the website to send me overall information about your lathe ?
@Radiotexas7 ай бұрын
Very cool!!!
@JoeInBendigo9 ай бұрын
Beautiful! Are you planning to add functionality for a second stepper motor (for cross slide drive)? Then it could be really automatic. You would just need to add menu items for depth of cuts, final depth and a spring pass or two. I would like that!
@electronicgearbox9 ай бұрын
I have been working on the 2 axis unit all this year, it is really not as simple as the 1 axis, at least the way i see it. It should be available in a few months.
@rob98648 ай бұрын
I will be interested in the 2 axis version, do you think it will be ready in February, any idea on cost yet? Thanks
@hugosarrazin97908 ай бұрын
I will make announcements at the middle of January.
@jorickferies2299 Жыл бұрын
Super invention merci !
@rogerbettaney8443 Жыл бұрын
I am in the process of installing this on my little lathe. As the control box is fitted with a socket for your use, would it be possible for you to reprogram the controller if required or further developments by you. If so, could this be carried out over the internet or could we return the control box to you. The unit is connected up and working, all setting up completed and everything worked first time with no problems. It’s now up to me to get comfortable with selecting the correct program to do what I need. Looks like a good controller, thanks Roger
@electronicgearbox Жыл бұрын
Hi, yes it is possible
@bonyface7 ай бұрын
Nice! What about magnetic encoder or optical? I have big lathe and dont like to install gear on spindle shaft.
@electronicgearbox7 ай бұрын
Can you send me a reference ?
@user-nf4qn7st6z Жыл бұрын
Hello, I would like to know how to buy an electronic controller, thank you!
@arx2386 Жыл бұрын
Oh what a pity. Just recently purchased the old version.
@Alex145180 Жыл бұрын
I have the old version on my lathe. To upgrade to the new one do I have to buy not only the new control box but also the electronic device for the encoder and steppermotor?
@electronicgearbox Жыл бұрын
No, this control box can replace any other ELS, mine or any from other manufacturers without modification on the driver, stepper motor, encoder or power supply. Just replace the box.
@antoinepaulus1166 Жыл бұрын
Bonjour, Très intéressant comme système, Quel est le pas maximum que l'on puisse faire ? Pour faire une rainure de graissage elliptique sur un palier ? Merci Antoine
@electronicgearbox Жыл бұрын
Il n'y a aucune limite sur le boîtier. C'est la vitesse et la puissance du moteur pas à pas qui sera le facteur limitant.
@speppino9 ай бұрын
Is it possible to add the function to do automatic feed like automatic thread? I find it useful to turn a specific length and specify the exact moment to stop. In this way you dont have to disengage the half nut in critical situation when there is a risk to crash. Thanks
@electronicgearbox9 ай бұрын
Automatic thread is the same as automatic feed except it knows when to start. You can use this function for turning too. Another option for you is to use the hardware stop switches.
@user-tr9wq6fe9k6 ай бұрын
Howdy, I have installed your ELS unit and love it. I have it installed on a PM 1130V and located your controller where the original RPM read out was. One question I do have is when I am turning but have the unit set to thread with a length of 4 inches it will only run for about 2.5 inches, however doing the same with my machine in thread mode it will run 4 inches. Is this something you could address with a software update. Thanks
@electronicgearbox6 ай бұрын
Hi, not sure I quite understand the problem but I will test to make a semi auto thread of 4 inches to see if can I can reproduce it, I will contact you directly
@user-tr9wq6fe9k6 ай бұрын
I think I know the issue. I have two lead screws, one for threading and the other for the power cross slide/power compound. I have your controller in thread mode but I have my machine in turn mode which drives the shaft for the power cross slide. In my machine which is a PM 1130V, I’m thinking the drive ratios are different between the threading lead screw and the shaft that drives the power cross slide.
@bobuk5722 Жыл бұрын
C'est manifique! My apologies, sadly that's the limit of my French. Is the controller for sale? If so where? You have explained how to set it up very clearly. I am sure there would be a lot of interest.
@electronicgearbox Жыл бұрын
Thanks. It is available on my website: electronicleadscrew.eu
@jeffsteele5997 Жыл бұрын
great job! Will this drive a servo as well?
@electronicgearbox Жыл бұрын
It should but never tried.
@maillardo39 ай бұрын
Bonsoir, j’ai commandé ELS, je l’attend, mais je viens de me rendre compte que sur mon EMCO compact 8 j’ai une vis mère de 1,5 ma qui n’a pas l’air d’être prise en compte, comment faire. Merci
@electronicgearbox9 ай бұрын
Bonjour, il suffit de mettre 3mm et de doubler le paramètre 'nombre de dents de la vis mère'. Il y a déja eu beaucoup d'implémentation sur un EMCO 8, ca fonctionne trés bien
@michelbiederbeck2985 Жыл бұрын
Bonjour, Génial ... C'est quoi votre encodeur? Est-il livré avec votre appareil? Où peut-on se procurer celui-ci? Le moteur pas à pas se recorde-t'il directement à votre appareil? Merci pour tout.
@electronicgearbox Жыл бұрын
Il faut un encodeur incrémentiel à collecteur ouvert fonctionnant en 5v, je conseille un 600P/R. Non il n'est pas fourni mais je peux vous en fournir un si vous le souhaitez, envoyez moi un email pour cela. Il vous faudra également un driver pour piloter le moteur pas à pas.
@en2oh9 ай бұрын
would this work with a stepper with integrated driver? (and from your site, I see you're out of stock on these. any idea on ETA?)
@electronicgearbox9 ай бұрын
New units will be available on November 25th. Do you mean closed loop stepper motor ? Do you have a reference i can check ?
@patricklucki5368 Жыл бұрын
What driver, encoder, and step motor would you recommend. I will spend a little extra to make sure I have a good system with your ELS monitor.
@electronicgearbox Жыл бұрын
Hi, send me an email on electronicgearbox@gmail.com to talk about it
@carlitoheloise61112 ай бұрын
bonjour, la video est tres interessante pourriez vous nous communiquer la ref complete du moteur d entrainement de la vis sans fin car sur nema 23 il y a plein de ref differentes merci par avance
@electronicgearbox2 ай бұрын
Bonjour, le dimensionnement du moteur dépend de beaucoup de paramètres. Mais, de mon expérience et en règle générale, pour un mini tour de moins de 100Kg, un Nema 23 de 3NM suffit. Pour les tours plus lourd jusqu'à 250Kg environ, il faut un Nema 34. Au dela, un Nema 34 peut convenir si on reste dans une plage de rotation assez basse. A noter que beaucoup utilise plutot un servo avec de trés bons retours. L'ELS reste peu adaptée au tours traditionnels lourds.
@carlitoheloise61112 ай бұрын
@@electronicgearbox bonjour, merci pour votre réponse j ai un chester db10g, 550*250 un peu depouillé, il manque la gearbox. ce système m intéresse. par contre je voudrais installer le moteur pas a pas directement sur la vis du trainard donc pas de pignons ni courroies comment paramétrer le nombre de dents du moteur puisqu il n y en a pas ? j attend avec impatience votre prochaine vidéo. bien cordialement
@hugosarrazin97902 ай бұрын
@@carlitoheloise6111 Facile, 1 et 1, aucun rapport de réduction
@carlitoheloise61112 ай бұрын
@@hugosarrazin9790 très bien,merci. donc pour le pignon de l encodeur et du mandrin qui seront les mêmes je ferais pareil. pour le moteur pas a pas je pense prendre le nema 34 6NM sur amazon. j espère qu il sera compatible avec cet ELS. merci pour ces précieux renseignements.
@markchandler6417 Жыл бұрын
Does the semi auto screw cutting work when cutting imperial threads with a metric leadscrew? Great project. Does it have a link to the lathe emergency cutout?
@electronicgearbox Жыл бұрын
Hi, yes it does cut imperial thread with a metric leadscrew No, there is no link with the emergency cutout but i do not see any interest. If the lathe stops, the encoder will not send any pulses and then the stepper motor will stop at the same time.
@johnkelly7264 Жыл бұрын
Looks v interesting. Subbed here.
@maillardo3 Жыл бұрын
Bonjour, peut on faire des pas à gauche ? Merci
@electronicgearbox Жыл бұрын
Bonjour, oui en automatique si vous inversez le sens de rotation de votre mandrin et utilisez l'outil à l'envers. Si non vous pouvez en manuel de gauche à droite avec un appareil à retomber dans le pas
@Somer6060 Жыл бұрын
How do I acquire this ELS in this new version, and a doubt, which language does it have?
@azinfidel6461 Жыл бұрын
At the bottom of the description it has the Ebay link. It is in france. Could not find it on US eBay until I searched for "electronic lead screw for metal lathe"
@electronicgearbox Жыл бұрын
It only has english language for now. This is the link on ebay: www.ebay.fr/itm/175555577712 Or contact me directly: electronicgearbox@gmail.com
@robertolazzarini898 Жыл бұрын
Is this project based on Arduino?
@electronicgearbox Жыл бұрын
No
@wolfhardgielow4924 Жыл бұрын
Leider auf eBay nicht mehr erhältlich. Schade. Würde gerne eins kaufen.
@electronicgearbox Жыл бұрын
Some units will be available again in about a week. If you want to be sure to have one, send me an email.
@electronicgearbox Жыл бұрын
electronicgearbox@gmail.com
@wolfhardgielow4924 Жыл бұрын
Danke. :-)))
@AlainMazy Жыл бұрын
Ta boite est imprimée en PLA, non?
@electronicgearbox Жыл бұрын
Oui
@densilano2726 Жыл бұрын
@@electronicgearbox bonjour pour le kit complet combien ça vaut merci pour la reponse
@densilano2726 Жыл бұрын
la livraison inclus l'ecran plus arduino
@electronicgearbox Жыл бұрын
l'unité est prête a être installée sur le tour, il vous faudra une alimentation, un moteur pas à pas, un encodeur et un driver pour compléter l'installation: electronicleadscrew.eu/wiki/
@densilano2726 Жыл бұрын
@@electronicgearbox merçi
@densilano2726 Жыл бұрын
@@electronicgearbox bonsoir,si j'ai bien compris le code est deja dans arduino pour le faire fonctionner,il y a plus que faire les branchement et reglage sur le tour .
@electronicgearbox Жыл бұрын
@@densilano2726 Oui, mais ce n'est n'est pas un arduino, ca n'a pas la puissance nécessaire