My NEW TRUCK!!! - BMW M57 Swapped P38 RANGE ROVER! 200hp Diesel Torque MONSTER!

[@zoezoe610]

I had a p38 for 6 years they are excellent off road just don't fill the car with water as the computers are under the seats. They are a beast. Look for these guys on You tube "Off-road Turkiye"

[@uwharriebigfoothunter]

I own a 4.6L P38 and I love it. I'd like to swap the 4.6 one day also. In the states we didn't get Diesel options.

[@zoezoe610]

@@uwharriebigfoothunter They are a great truck, thanks Caleb

[@grahamwest1079]

Great engine thinking of putting a M57 into my 90. One of Rotorua land rover enthusiasts club members had a P38 and it was well waterproofed as on one of our trips he was charging around in the river more than anyone without a splutter, but that was probably 8 or 9 years ago.

[@uwharriebigfoothunter]

I own a 2002 4.6L P38 HSE and absolutely love it. Having that BMW diesel is badass! The front bumper looks to be Terrafirma. Those Terrafirma 16x7 wheels are expensive too. Overall I'd say it's a very nice Rover! 🤩

[@Crawlerer79]

Haha yea it’s an awesome motor and those wheels were a bonus! Could never justify them otherwise 😂

[@BushAdventuresAustralia]

That Range Rover P38 is one epic 4wd good choice.

[@sethmcgill4835]

Spotto the Livin4x4 jumper! Those boys are all local to me down in Victoria, Australia. Funny watching 4x4 content overseas and still getting cues from back home

[@Crawlerer79]

Haha I love their channel! Hopefully we’ll have our own merch soon tho!

[@Apbt-rv7zw]

Love it watching from Oz, my dream to do this conversion one day.

[@uwharriebigfoothunter]

I'd like to engine swap my P38. I'm in the states so I've been think LS swap since parts are cheap and available

[@Crawlerer79]

Haha yea it’s an awesome motor, definitely will be putting them in other builds in the future too!

[@aramakaraka]

Did the same trip but in reverse from Dunedin to Rotorua last month and picked up my first Land Rover (disco 3) loved every minute of it 👍🏾👍🏾

[@Crawlerer79]

Yea it’s an awesome drive! Thoroughly enjoyed it!

[@fkzixing]

Man that’s awesome we went and got a vehicle from Auckland at the same time !!!

[@jacko1634]

Make sure your door seals are good because only a tiny bit of water can wreck the computer under the drivers seat. My dad and I have had to replace it twice getting stuck in bog holes. We had a 4.5l v8 I don't know if you still have one with the diesel engine.

[@jacko1634]

When water got on the computer the horn was blasting, wipers were going hazards flshing and engine constantly tries turning over

[@Crawlerer79]

Good advice... I say this won’t be used offroad but I’ve already broken that rule! Will keep outta deep water in general tho!

[@FJUH]

Great buy mate! That NZ scenery too!! That engine sounds like the one they are using in the Ineos Grenadier.

[@Robdutton91]

It’s the same basic engine but guessing from the 200hp title of the vid they’re using the original M57 from the e39s and e46s. The Grenadier will have the more modern unit which is capable of 300hp and 500lbft with just a tune, so even more of a monster

[@teamces]

Nice Rover. I really thought you were going to have a break down moment. Glad you made it back home.

[@Crawlerer79]

Haha this is meant to be the reliable one! 😂 time will tell...

[@phil_p]

Epic road trip. Thanks for making me homesick, again. 😎

[@sootyranotdlife4620]

Awesome bro 👌💪 was good to meet you both in Dunedin last weekend. Keep smashing the Content bro loving it.

[@micromacmacca1170]

What! No tooting the horn through the tunnel! HAHA

[@jamiesonfilmz3994]

Thats so sick

[@Mario-somo]

Was the P38 2.5 gearbox valid for the swap to the M57?

[@MegaMadmax1000]

Hell yeah man! m57s are awesome engines

[@NorbertDidics]

Great video! I am doing a similar project and I am stuck with wiring of the automatic gearbox. How did you manage to handle that?

[@tristanstanners1528]

Guy from Turkey had a lifted P38 on 37" Trepadors, you won't do it...

[@perfectlyusablelada5289]

Oh man, I remember seeing a Range rover come up on TradeMe a little while ago that had a toyota 1PZ swap

[@ned900]

I have a P38, and I have an M57, and I have a 4HP24 with the 065 designation, and I have an adapter plate from Ashcroft to go between the engine and the autobox, and I have a compushift to control the 4HP24 I spent a lot of money on all those bits, but I'm still missing some things. Like the sump for the engine. Would love to know what the guy used for the sump, and also what he use to control the 4HP24, is it still using the factory ECU? I think the sump and the autobox are the sticky bits where people get stuck.

[@Crawlerer79]

Has the factory gearbox ecu... holds gears longer than I’d like but not so bad that I can’t get over it haha

[@mxpikefish]

​@@Crawlerer79 Hi! Were they used gearbox ecu of 4hp24 from 4.6 gasoline engine? Can you photo your gearbox ecu? I have a thought to make the same swap. Can you make photo of your engine ecu with codes and digits on it? Thanks in advance!

[@mxpikefish]

​@@Crawlerer79do you who made the coversion to m57 engine?

[@c.h1645]

Need to hear her spoool, straight pipe and a staino 👌 nice rig mate

[@Crawlerer79]

Haha cheers, already in the works!

[@sassall4284]

How reliable is this wagon mate? Very slick

[@debbie6298]

If the computers are under the seat, you could extend the lume, and mount at a higher point.🤠

[@anathisonqishe8610]

Doea it have ABS, if yes how did you sort them out from you ECU. I need fhis for L322 M57/5L40E to M57N/6hp26. I know most people say its not wealth the effort but im looking forward to do it.

[@raymax3155]

by chance do you know who did the engine swap, looking at exactly the same swap

[@adamwolf101]

Could you turn the music down when you talk 👍

[@Ajithmohanan21]

Nice grab mate👍

[@anggrboi]

m57 would have a bit more than 200hp i reckon, maybe 260hp and 420ft lbs stock. wonder what those number are to all four wheels. with a tune those engines make about 50-100 more.

[@Crawlerer79]

Haha yea I didn’t have an exact number so I rounded down to keep any keyboard warriors quiet! 😂 it sure moves, has a light tune on it well so 250hp seems reasonable

[@flexgggjl1309]

Love p38s I have a v8 one. Wicked purchase man

[@fiifiafful3400]

I have a Range Rover sport 2010 can i swap into BMW M57 ?

[@alexgoodin5503]

Did the last owner tell you who did the engine conversion?

[@killa1triangle13]

Hey mate, doing an m57 land rover conversion atm. Any chance I could pick your brain about how this thing is set up

[@Crawlerer79]

Hey mate, sure thing, ask away! I didn’t build it so don’t know everything but can try help out!

[@sassall4284]

This is very cool

[@karnponglap.2832]

Can i some question please? If we swaped m57. Can traction control and other system active ? I'm interesting diesel engine. THX for time

[@Crawlerer79]

I’m sure there’s a way to keep TC, however it has been removed on this truck 👍

[@edyallreadygalaxy717]

2.5 or 3.0 engine?

[@Pdfflyer1]

Are you located in Canada, US, or UK ? Not familiar where Hamilton is that you reference. Very nice Range Rover, Good engine choice

[@Crawlerer79]

In New Zealand 👍

[@Pdfflyer1]

@@Crawlerer79 Thanks for the comeback, Enjoy your renewed Range Rover

[@sanyaevans6053]

I really wished to see the performance of the vehicle than the plenty of talk

[@rosssmith4054]

Turn it into a proper off roader might embarrass the disco and be comfortable

[@zandercraghead5355]

Will never embarrass the disco

[@Crawlerer79]

Haha nah got enough tough trucks already although I wouldn’t mind the comfort haha

[@rosssmith4054]

@@Crawlerer79 would be cool on 35s and locked with the m57

[@Fred_8360]

Nice Rigg are you from New Zealand

[@dontdoit6403]

My m51 p38 is pushing 200 plus hp

[@rjuarezgarrido]

Mpg? That engine are reliable ?

[@Crawlerer79]

Gets around 12l/100kms. That’s a mix of town driving, open roads and offroad. And being driven reasonably hard haha, will do a lot better with a lighter foot haha. And yep, awesome engines!

[@andrewfreer5797]

Egg range rover made a m57 diesel no swap here purchased.

[@luckyrobp]

Boring, i wanted too know about the vehicle & how it was done etc, not interested in people yapping.

[@michaellockhart4493]

WANTED SOME USEFUL INFORMATION ABOUT THE SWAP? BUT IT IS ALL ABOUT THEM! A WASTE OF TIME WATCHING THIS DRIVEL!